Can't believe you do this great Video and then you don't show what it looks like after!
@maxtrac11
7 жыл бұрын
Noted. We will take your comment into consideration when doing our next video
@Burgher1605
3 жыл бұрын
@@maxtrac11 lmao this response is wonderus.
@louiscave5732
8 жыл бұрын
thanks for the video, did the install by myself, 3 hours front/ 3 hours rear, used the instructions and video. didn't have to pull off the exhaust to drill the drop down bracket. Very simple to do, took it to get aligned and rides better than stock..
@luissalas5509
5 жыл бұрын
Hi, does it ride comfortable, or is it a more stiff ride?
@Armedlegally
7 жыл бұрын
It's like getting to the climax and your mom walks in......total let down at the end....
@erikarreola5001
3 жыл бұрын
@@FurianXO lol
@declanclyde211
3 жыл бұрын
You prolly dont care but if you guys are bored like me atm you can watch pretty much all of the new series on instaflixxer. Been binge watching with my brother for the last few days =)
@bradykaiser3540
3 жыл бұрын
@Declan Clyde yup, I've been using Instaflixxer for months myself :D
@mnich30
7 жыл бұрын
Just had this kit installed. You guys should have the bearing carrier spacer as a component of the kit. The part that keeps your driveshaft from snapping should not be an add on accessory lol. I love how it looks though!
@DudeAlien
9 ай бұрын
It would be awesome if we could get a video for the 6.5 kit
@aznycity858
8 жыл бұрын
you show the entire installation, and then the final view of the truck for 1 FREAKING SECOND....REALLY
@Jarod1941
8 жыл бұрын
Was about to make the same comment. Shameful video making. 👎👎👎
@maxtrac11
7 жыл бұрын
Noted. We will take your comment into consideration when doing our next video
@alrashdicool
6 жыл бұрын
fucked up really
@craigkerr9281
4 жыл бұрын
@@maxtrac11 too late now. You lost me.
@blue67strm
8 жыл бұрын
i installed this on my 08. it was very easy to do. looks really good. want to go a little taller with the lift now.
@gcuervogold
9 жыл бұрын
Nicely done and very professional.
@mikec7661
9 ай бұрын
you dont ever need to justify having a lifted truck 😁 nice ride.
@thomascatlett1542
7 жыл бұрын
I just put the 6.5 inch front & 4.5 inch rear lift on my 2015 Dodge Ram 1500 big horn Eco Diesel. I love the look of the truck my only complaint is you should advise replacing the upper control arms to a uniball to avoid alignment issues.
@maxtrac11
7 жыл бұрын
Thomas... We are coming out with forged aluminum uni-ball upper control arms VERY soon! 2009-17 2WD/4WD Ram stock height up to 7" lift! We should have them ready for shipping in the first quarter 2018.
@maxtrac11
6 жыл бұрын
Update: Forged aluminum upper control arms with FK sealed uni-balls will be available mid-December!
@thomascatlett1542
6 жыл бұрын
That's great for those customers that purchase this awesome lift kit after mid December. You should advise customers they may need to replace the upper control arms. I was informed you were in the development phase at the time I completed my lift so I had to go with another company control arms. Love the new look of the truck and turn many heads of other Dodge Ram owners when driving around town. Thanks for the response
@djaydom25
3 жыл бұрын
I disconnected everything in the front for a simple 2.5 inch leveling kit and I had to compress the coil to get it in.... no way a 7 inch lift coil goes in that easily!!
@cheeseymccheese7249
2 жыл бұрын
Great video, never understood why people lift a 2wd truck
@drydenblake9884
6 жыл бұрын
Hey question why didn’t y’all buy the dust cover back on the hub in the install video
@maxtrac11
6 жыл бұрын
Keeping the dust cover will result in the brakes not working properly
@6nzchencho752
Жыл бұрын
Hey I installed my 2.5 coils 2 years ago on my 06 ram 1500 megacab rwd/2wd. I just ordered a pro comp 1.5 spacer. Will that work ? I think that goes at the bottom. I still want to reuse the stock 2.5 maxtrac shocks that came with that kit. I would appreciate a replay thanks guys !!!
@joe7528
2 күн бұрын
Is there a 8" maxtrac lift kit for the 4th gen Ram 1500 rwd ? .... Is there a 4.5 rear coil spring for the same vehicle instead of 3" coil spring and 1.5 spacer in the 7"/4.5" lift kit
@Seaswirl92
9 жыл бұрын
What tire size and brand are the tires that were put on the truck in the video. It looks like 33's, is that for decent gas mileage or they look better than 35's. I have the same truck color and all and the wheel and tire combo y'all used looks awesome. I'm wanting to get the lift, but I was gonna go with 35's unless it makes a big difference in mpg.
@maxtrac11
9 жыл бұрын
The Wheels & tires used in the video are a 33 x 12.50 on a 20" wheel. That is what the customer provided us with. However our kit is manufactured to run up to a 37 x 12.50 on a 20x9 on a 5.5" backspace. Using a larger tire will always alter MPG, it just depends on how much you drive the truck and if it is stop and go or highway miles.
@theyotaduo
Жыл бұрын
Did you bleed all four brakes afterwards? Or just the two in the front?
@mandokingz7333
2 жыл бұрын
Why was the reason you dont recommend installin dust shied again?? Will it not fit?
@dustinwadesmith
8 жыл бұрын
nice video very professional.. will you do mine? I just bought already has a small lift with 35s and air bags on back. how do I tell what size lift I already have?
@desvariosdeuncamionero8856
9 жыл бұрын
Give me a link bcause i cant find it on your web site
@kalilh9671
7 жыл бұрын
Guys help me out is a lift on a 2wd stupid?
@6nzchencho752
Жыл бұрын
I just installed a 1.5 inch pro comp coil spacer on my 06 megacab 2wd/rwd that already has 2.5 level coils from maxtrac. But one side is a inch higher. Is that normal ?
@jasonlitchard1327
2 жыл бұрын
I installed the 4.5 inch spindles and the 3 inch coils on my ram. How many spacers should I have put in for the carrier bearing? I put all them in and I’m getting a clunking noise and minor vibration. I checked all the bolts multiple times. Only thing I can think is maybe the driveshaft and the angles are wrong.
@baloo217
9 жыл бұрын
Hi, i love your videos, i have a 2009 dodge ram 1500 quad cab 2wd, i just want to lift up the back 2 inches and level the front to be equal with the back. I was going to buy the coil spacers for the back and front but at 4 weels parts they told me that i have to change my control arms also, they want me to pay 2000 dolars. I just want to do it my self, what do you recomend? Can you walk me on this process? What i should do? thanks in advance.
@dillonthompson9656
9 жыл бұрын
I'm having to do the same thing with my 2015 1500 ecodiesel. just spent $800 at ready lift for the new upper control arms with the uni ball ball joint. they have a cheaper set up ..but just as good arms coming out in a week or so. I was told if I put the spacer ( 1 1/2 ) on ..the ball joint would fail immediately.
@ToAstYNaChO
8 жыл бұрын
What is the easiest way to go about lowering the rear axle? im worried once i unbolt the trac bar and the shocks, the axle will just roll off of my jack. Is the bottom of the diff flat enough to prevent this? or should i secure the axle with some sort of hanging system so it stays put once i lower the jack.
@maxtrac11
7 жыл бұрын
Use jack stands to hold the vehicle, then use a floor jack to control the axle height
@baloo217
7 жыл бұрын
hi, i have a 2009 dodge ram 1500 v6, 2wd quad cab , how much will be for this 7inch lift kit? thanks in advance. waiting for your response. thanks
@TrayJayRecords
6 жыл бұрын
I installed this and have clunking going over bumps even at slow speeds. i know it could be many things but anything in particular to check out? it seems like it happens on both ends
@maxtrac11
6 жыл бұрын
Sounds like something is loose. Give us a call and we can help trouble shoot what the issue is
@TrayJayRecords
6 жыл бұрын
Max Trac I really appreciate the comment back. When I got it aligned I asked the tech to tighten up all suspension bolts to spec (i used vise grips for half the install lol) and now it rides like a dream. Thank you.
@jasonlitchard1327
2 жыл бұрын
I have the same issue and everything is tight. I’m wondering if it’s the driveshaft and maybe I put too many spacers in. I only did the spindles in the front and the 3 inch lift coil in the rear and used all the spacers
@chaisonmathis9059
3 жыл бұрын
I have a 2009 dodge ram 1500 2wd 4 door and I have leef in the back not springs . Iv looked all over the website but can find a kit that looks like it will work. Can someone recommend?
@navajesus89jn
7 жыл бұрын
I same kit on my 14 1500 ram I have problems with the rear shock bushings it's only six months old maxtrac which shock bushings do you recommend
@scottscott5301
5 жыл бұрын
Why no before and after pictures?
@last1lost
7 жыл бұрын
Would you suggest regearing after lift and tires? And what gear ratio would you recommend?
@maxtrac11
7 жыл бұрын
depends on what size lift and tires you do. Its best that you contact a gear manufacturer for recommendations
@EmmanuelPalaciosify
4 жыл бұрын
Do you need new upper control arms for the 4inch lift or 7inch or are the dimensions safe to run stock factory arms for the upper ball joints?
@felixochoa1600
5 жыл бұрын
I sat thru the whole 12 mins to see the after effect nothing wow
@mariopopoca5769
8 жыл бұрын
bro how much does something like this run i have aa 2014 dodge ram sport i really want my dream truck lofted but dont have an idea how mich it will run me..
@thenewlife.pt2724
5 жыл бұрын
Is this the same for a 06 ram 2500 megacab 2wd ?Looks all the same. Spindel controls arms swaybar yie rods
@erickf6518
9 жыл бұрын
I have a 2010 dodge ram quad cab 4.7 2wd , can this be installed on this truck ?
@rockstar4x4
7 жыл бұрын
guys you better explain why you use aftermarket wheels... it is not fair you buy the lift kit and spend more on wheels because the lift spindle hit them from the inside. (not a single warning label on instructions manual, web page or box) ONLY after finishing your installation you realize the problem. you should warn people!!!
@maxtrac11
7 жыл бұрын
hello rockstar. to answer your question we do list the minimum wheel diameter, recommended wheel width and max backspacing on our website MAXTRACSUSPENSION.COM . This kit will fit the OEM 20 inch wheels by the way. As far as other size OEM wheels we do not have the factory wheel data and recommend measuring prior to install. As far as tires it is generally not recommended to run factory size tires with this large of a lift. If you have any other questions we recommend you contact us a 714-630-0363 Thank you
@thenewlife.pt2724
4 жыл бұрын
What spray did you use ? Or what lub or grease can I use?
@jonathansandlin5486
9 жыл бұрын
will this work with the Eco Diesel models ( non-HEMI ) 2wd trucks.
@walter7199
6 жыл бұрын
Hey @maxtracsuspensions can I use my factory 17 inch wheels on my 2016 ram 1500 as long as I use a 1.5 inch hubcentric wheel spacer? Or would you recommend going for an aftermarket wheel with more offset? I plan on running 37s
@gzararide1671
6 жыл бұрын
i need a lifter kit but my ram 1500 2wd have rear suspension leaf springs. what kit belong to this model?
@roberth3277
9 жыл бұрын
Are your shocks Hydraulic or nitrogen charged?
@MrThedonkey02
3 жыл бұрын
Waited till the end hoping to see the outcome looks and never happened.. wtf you need to show the new look
@santiagoramirez5236
6 жыл бұрын
Any problems with (upper control arm)?
@deontehines7145
3 жыл бұрын
How far did you measure for the track bar bracket
@economico2313
3 жыл бұрын
how does the install cost
@onefast427
5 жыл бұрын
Are you going to come out with this 7in lift for the 2019 and up?
@baloo217
7 жыл бұрын
hi, is this kit for the v8 model only? i have a 2wd v6 09 dodge ram 1500 , will this kit work on my truck? please help, i dont want to buy the wrong kit. tks
@maxtrac11
7 жыл бұрын
K882465 will work on a gas V6 and K882464 will work on the Diesel V6
@baloo217
7 жыл бұрын
hi. thanks. can i order stight from you? at maxtrac.com
@AM-hg9xh
9 жыл бұрын
And how everything goes
@JohnDoe-bk4ci
6 жыл бұрын
Can y'all do this for a 2WD 99 f150 lift on 5.5" lift
@betoloera1
7 жыл бұрын
what rims and tires were those on the video.. sizes please
@MickakaMurph
8 жыл бұрын
I have a 2008 dodge Ram 1500 2wd 3.7. I just ordered the MaxTrac 4.5" lift kit with shocks for it. Will i have enough clearance for 35" Amp A/T's and in your opinon should i go 7" or will the 4.5" look ok for that size tire?
@Jarod1941
8 жыл бұрын
Yes you'll have room. Possibility of some minor trimming. But go 7" and do it right the first time. "Don't spend your money twice" as us Jeepers says as we graduate thru the build levels.
@MickakaMurph
8 жыл бұрын
thanks man!
@dallastruckscene9755
5 жыл бұрын
Will bigger upper control arms be needed with this install or no?
@maxtrac11
5 жыл бұрын
No Sir
@justinkeen6084
4 жыл бұрын
Is it recommended to do the upper control arms as well
@8bit270
3 жыл бұрын
no unless the bushing are shot you dont need to change your factory upper controll arm
@s3ba314
8 жыл бұрын
where can I purchase a 3inch lift kit? if anyone can help please and thank you.
@Edgar_HDEdgar_HD
7 жыл бұрын
I have a 2009 dodge 1500 2wd what do you recommend would look good ?
@jordanenriquezbitchnigga9117
7 жыл бұрын
I would say a 4/6 drop or something like that because well it's a 2wd
@adamtx214
7 жыл бұрын
Bo Sexton im mexican and couldnt agree more but a truck shouldnt be lowered no matter if its a 4wd or 2wd at the end of the day its a truck so its made to be lifted
@valanze28
6 жыл бұрын
Jordan Enriquez drop a truck? WTF is wrong whith you? Why you dont lift a Honda? Is the same useless concept.
@thenewlife.pt2724
5 жыл бұрын
I have a 2006 megacab 1500 2wd 5.7 gas ( 2500 frame ) and I'm going with your 3 inch lift coils. Would there be any issue If i get the diesel coils
@maxtrac11
5 жыл бұрын
The vehicle would sit alot higher and require alot more components. We do not recommend this. We offer a similar kit for your vehicle with a spindle to get 6 inches of lift
@thenewlife.pt2724
5 жыл бұрын
Max Trac is that the 2.5 coil plus 3.5 spindel because the one I'm getting. Who can I talk to or hit up on Instagram?
@maxtrac11
5 жыл бұрын
@@thenewlife.pt2724 Sorry for the delayed response. Yes the kit for your vehicle has the 3.5 spindle and 2.5 coil. You can reach us at 844-535-1668
@markmartinez6213
6 жыл бұрын
How much is the kit?
@RATSINMYROOM
9 жыл бұрын
Anyone use this kit for off roading? How durable is this kit?
@clintg09
9 жыл бұрын
What about the rear axle do you need anything for that or what
@maxtrac11
9 жыл бұрын
As far as what?
@PimpLifeEnt
8 жыл бұрын
Just bought a 2013 quad cab 2wd. Was considering going 6 inch lift with 35s on a 20x9 wheel. Any suggestions? Priced everything at 4 wheel parts in Dallas, wheels, tires and 4 inch lift is $2300 just parts.
@MickakaMurph
8 жыл бұрын
how is it $2300 ? did you get used tires and wheels ? lol I would think 3K for parts and 700 for installation is where you should be at.
@PimpLifeEnt
8 жыл бұрын
That's the price I got online. All the way to checkout. Parts, no installation
@MickakaMurph
8 жыл бұрын
that's really odd man. usually the lift kit alone is $700 and tires $1100 at least then wheels I guess you could find some 20's for under $1000. I just don't see how you got that price.
@MickakaMurph
7 жыл бұрын
I fucked it up and got a 4 in lift instead of the recommended 7 in lift. Now my tires rub on the inside of my front fendors. Worst mistake of my life. Now my truck also shakes real bad on the highway when I go over 60mph. Someone said that the person who did it forgot to put some bolts back on the sway bar or it just needs a stabilizer bar now. Plus I have not got lifted front shocks on it yet and it still has the stock shocks which is bad I know
@adamtx214
7 жыл бұрын
BigB cus its a fucking truck so its meanr to be lifted? Mines 2wd and lifted and i can still go off roading in it. Dont need a 4wd to do basic off road.
@nicholas198615
7 жыл бұрын
I have a 2016 RAM 1500 Sport 2WD. I want to put 20x12 Rim with some 35's. What kit should i look into?
@maxtrac11
7 жыл бұрын
You may need to do a a 7 inch lift to clear the fenders. Unfortunately we have not check fit 12 inch wide wheels so, we can't give you a definite answer
@nicholas198615
7 жыл бұрын
What about a 10" wide rim.
@maikalsato
7 жыл бұрын
Nick C. Offset of rim also comes into play
@alexstubbs1417
9 жыл бұрын
Would this fit my 2015 Dodge Ram 1500 tradesman 2wd regular cab, long bed?
@alexstubbs1417
9 жыл бұрын
With the 5.7 hemi
@maxtrac11
9 жыл бұрын
Alex Stubbs I believe you emailed in to our sales team as well. Thank you for your interest in Maxtrac Suspension. Yes, our 7" kit (Part# K882471) will fit 2009-2015 Ram 1500 2wd 5.7L HEMI. The kit consists of 4.5" lift spindles w/ brakelines, 2.5" front lift coils w/ front shocks & a 3" rear lift component box. This will be a 7" front / 3" rear kit. Depending on how much rake your truck has stock or just how you would like it to sit, we also offer an additional 1.5" rear coil spacer that can be used in conjunction with our 3" rear kit. The part number for the rear 1.5" coil spacers is 1628 and you can always slip them on later if you want they sit under the rear coils and do not require any extra parts. Please let me know if you have any other questions, I am glad to help out. Thank you
@tuck2009
7 жыл бұрын
Does this kit work on the 2015 2wd 1500?
@maxtrac11
7 жыл бұрын
Yes
@MementoMori818
9 жыл бұрын
How would I be able to buy this kit?
@maxtrac11
6 жыл бұрын
Go to: www.maxtracsuspension.com Click on "Dealer Locator" in the top bar to find a dealer near you...
@Muddx10980
6 жыл бұрын
What size tires are those?
@maxtrac11
6 жыл бұрын
37x12.50 will work with minimal trimming with a 9-10 wide wheel
@Varedz
9 жыл бұрын
So it ok to lift 2wd trucks?
@richardcamacho4230
6 жыл бұрын
Varedz yes it's definitely okay there's no rule book . I own a ram 2wd and lifted 3inch thinking of going with this 7inch next. 💪
@Varedz
6 жыл бұрын
Richard Camacho i just lifted my last year mine has a 6.2 Supercharger on 38x13.50R22 ford 14 F-150 thing has power
@AM-hg9xh
9 жыл бұрын
As you pay for the lift kit
@timrob_showtell1771
5 жыл бұрын
Either show the truck r give us all 12 minutes of life back
@weliketomoveitmoving9343
5 жыл бұрын
Why are you wearing gloves? It's a virgin silly
@joeschneider2138
9 жыл бұрын
Here is the link to our 7" kit for out 2009-2014 Ram Kit with MaxTrac Shocks. www.maxtracsuspension.com/catalog/product/view/id/583/s/2002-2008-dodge-ram-1500-2wd-7-lift-kit-w-maxtrac-shocks/
@HectorLopez-gt9qf
5 жыл бұрын
Yyyy cómo quedó
@loganspargo9222
8 жыл бұрын
why even bother lifting a 2wd
8 жыл бұрын
because they can. that's why.
@RadRover99
8 жыл бұрын
Logan Spargo so that assholes like you would question it. that's why!!!!!
@valanze28
6 жыл бұрын
Answered your question!!!☝
@rodneys9805
3 жыл бұрын
total let down......wtf
@Dennis-sq2nm
4 жыл бұрын
Lifting a 2wd? Lol what a waste of money.
@buttcheezemo
7 жыл бұрын
I see this was made in 2014. I have a 2015 2wd Eco Diesel. Is it the same install procedures?
@blue67strm
8 жыл бұрын
i installed this on my 08. it was very easy to do. looks really good. want to go a little taller with the lift now.
@graysgarage2142
4 жыл бұрын
Tell me about how it looked afterwards is there a major difference or is it just a little? And also did you use a lift when installing or just a jack and jack stands ?
@blue67strm
4 жыл бұрын
@@graysgarage2142 I did it in my driveway with a Jack and stands. It's actually pretty easy. Its definitely an easier install than a 4 wheel drive lift. If you can do your own brakes, you can do this. Be sure to use an air impact to make it go much faster with disassembly. Major difference. My truck definitely sits higher than 4 wheel drives with a 6" lift. I have 35 x 20s on it and theres no rubbing.
@graysgarage2142
4 жыл бұрын
blue67strm thank you so much I’m going to have to do it to mine I have a 08 Dodge Ram and I’ve been wanting a lift for mine for a very long time thanks for the info man !
@RadRover99
8 жыл бұрын
would this lifting kit fit on a 2007 dodge ram 2500 2wd?
@thenewlife.pt2724
5 жыл бұрын
Luis M no try maxtrac 2.5 ltaller coils
@mariopopoca5769
8 жыл бұрын
bro how much does something like this run i have aa 2014 dodge ram sport i really want my dream truck lofted but dont have an idea how mich it will run me.. es
@chasidylafour9214
4 жыл бұрын
How much does lift price for?
@alexespinoza667
4 жыл бұрын
Whats the model for the shocks only?
@luisalbor1648
9 жыл бұрын
Does this fit on the 2014 1500 3.7 L v6 quad cab model ?
@maxtrac11
9 жыл бұрын
Luis Albor As long as the truck is a 2wd Yes it will, however we do not have a front spring for that, so what we do have is a 2" coil spacer that you can use in the front making the overall lift 6.5" in the front. The rear will be the same as the other models so the amount of lift will be the same as well.
@MickakaMurph
8 жыл бұрын
I have a 2008 dodge Ram 1500 2wd 3.7. I just ordered the 4.5" lift kit with shocks for it. Will i have enough clearance for 35" Amp A/T's and in your opinon should i go 7" or will the 4.5" look ok for that size tire?
@mariopopoca5769
8 жыл бұрын
bro how much does something like this run i have aa 2014 dodge ram sport i really want my dream truck lofted but dont have an idea how mich it will run me..
@maxtrac11
6 жыл бұрын
Go to: www.maxtracsuspension.com Click on "Dealer Locator" in the top bar to find a dealer near you...
Пікірлер: 147