I removed the entire rear end, all new suspension parts. I referenced your video because I am attaching the sway bar with new links and bushings to the cradle before I put the cradle back. Didn't take photos so I didn't know how to position the sway bar. Thank you for the detail on which direction to face the links. Real reason for comment, my 09 malibu is the same color and I use the same gloves. Nice work!
@jesusdiaz2772
3 жыл бұрын
Your little one did a good job!thanks for the tip
@thatvegashighrisedude2757
Жыл бұрын
Great cameraman ! Thanks for the video
@getplayed1860
6 ай бұрын
I appreciate it very much I don't see a lot of videos on how to change suspension parts AKA bushings and whatnot, I'll put some silicone grease I'm the metal so I can slide the bushing on the metal. I appreciate it my friend great video
@keithc.5764
3 жыл бұрын
Good Video......gets ya into it. FYI take this with a grain of salt or do it. Your best pair of Vise-Grips clamped TIGHT to the sway bar, just in front of where the new bushing is gonna slide on...grease it. They will provide the grip leverage for your large ChannelLocks to have something to grab and I SWEAR you can squeeze with the channel locks the bushing onto that "nub" :)
@Angel-tr7lf
Жыл бұрын
A little silicone spray will .make that job 300 times easier...God bless the little man adorable I have one of my own
@josea5228
3 жыл бұрын
Thank you for your time and help!
@DANAETH
3 жыл бұрын
Thanks For the tip!
@website270
Жыл бұрын
Socket with the right size channel locks and silicone
@motorcitymadman146
Жыл бұрын
A clamp for the stabilizer and a tripod for the phone. But thanks for the video
@edwardmmanns7454
3 жыл бұрын
Thanks. Installing at end maybe a c-clamp and socket to press in. Maybe not, lol.
@dronedotguy
2 жыл бұрын
Yeah now to put the method into place. Great!!!!
@Rscmgw23
3 жыл бұрын
Not sure how you did that so effortlessly brotha, literally been trying to put one on for 3 hrs and I have everything removed including the knuckle. I’m using a oem ac delco replacement and shit seems impossible. Is there a tool they use to put them on? I’m literally pulling on the upper control arm while trying to press the link on with my leg while sitting down. I’m 210lbs 6’3” no little bo peep. You sir, did this effortlessly. I’m fresh out of ideas
@jeremyzamora2875
3 жыл бұрын
How did you make out? Try putting grease just on the inside of the bushing and on the sway bar end. Make sure to use a socket to push that is just inside the outside taper of the bushing..good luck bro!
@Rscmgw23
3 жыл бұрын
@@jeremyzamora2875... I ended up putting the Knuckle assembly back on, used 2 big pry bars and the knuckle for leverage as well as a clamp to keep the sway bar from flexing. I replaced every suspension piece on this car, literally everything right on down to the sway bar bushings. That linkage is by far the worst part to replace. Good luck everyone lol
@website270
Жыл бұрын
Notice you put it on backwards anyway
@Powerstroke431
2 жыл бұрын
Or just use a small bottle jack inside of pushing 🙂
Пікірлер: 17