Thank you very much. I worked on my pt 6 months ago. I ordered all the parts and then Got a job contract out of state. I just got back and was like ??? Where did THIS go and what direction. Just got it all back and running in 20mins. 😅 You just SAVED me. Keep em coming man. University of KZitem.
@ASLTheatre
6 ай бұрын
Thank you! I have a 2007 that needed a new fuse module. This was an excellent guide on how to replace it.
@codylove4310
6 ай бұрын
I have a 07 pt cruiser limited 2.4l turbo.... is your faulty fuse module not allowing you to start the car, or only start it for 1 sec then turn off? Just replaced alternator and fuel pump
@ASLTheatre
6 ай бұрын
@@codylove4310 No, one of the headlights wasn't turning on. I tried replacing the bulb but no luck. The local dealership wanted $1000 + to fix it. Saved myself $300 by doing it myself.
@APDTY
6 ай бұрын
Thank You and glad it helped
@carlosmanuelazamarmorales11
Жыл бұрын
Soy de Tijuana (cerca de San Diego, CA) y me pasó el mismo problema, muy bien explicado a pesar de que no sé inglés, lo haría yo pero mejor lo dejo a manos de expertos.😊
@mikerichmond6308
2 ай бұрын
I'm curious. I'm a v dub guy. Is this really an essential repair? I mean, how often does a fuse box go bad?
@everett1330
15 күн бұрын
On dodge caravans especially the older ones they tend to go out quite a lot
@oliverhernandez9781
3 жыл бұрын
My blower fan inside my car sometimes works sometimes doesnt..i looked at the fuse box..when i press down on it..the blower fan comes on..then out of no were turns off..i even changed all the fuzes.
@juhasuomela1415
2 жыл бұрын
Thank you for this video! Well done. I have PT CRD 2007. At first there is no power to right low beam. Not I got the codes C2116 and C1073, ABS pump low voltage. I wish there is only some contact promblem, if not I must find the new TIPM module =(
@SlowSpyder
Жыл бұрын
I'm about to replace my TIPM. No power to the low beams. FOBs don't work. ODB2 port wont' read anything. Weird electrical problems... hoping this fixes it.
@guyaldrich5878
4 жыл бұрын
Did you try to just unplug it and then plug it back in first ?
@APDTY
4 жыл бұрын
Yes that's how to made it until this point.
@treygaines9796
4 жыл бұрын
hey i just replaced the fuse and removed the air filtet housing. Once everything was put back together i started the car and it sounded like air got into the eggine now the rpm is at 2 just idling. any idea whats the problem? oh yeah i started the car without the air filter smh
@tylerhamilton181
4 жыл бұрын
Probably missed a vacuum hose. Double check you dont have any leaks.
@monstaro19
Жыл бұрын
Missed a vaccuum hose or a sensor
@berenwarrior6276
3 жыл бұрын
I'm just wanting to change the fuses .
@apriltaurean3668
3 жыл бұрын
Does this need to be programmed to the VIN at all?
@monstaro19
Жыл бұрын
No just disconnect the batter and hold the positive n negative wires together for a minute then reconnect
@l3giongaming346
2 жыл бұрын
What size socket is needed to take off the red cable on the underside of the TIPM? I know the TIPM brackets are 10mm but what size is the nut for the cable from the TIPM to the battery??
@Kerpymon
Жыл бұрын
I believe I used a 13mm
@stevenpsp37
3 жыл бұрын
Thats awesome
@fabianrayas7319
2 жыл бұрын
I fixed the problem changing the all Module and 3 days after it broke again the same thing. What Do you think is the problem?
@ferodfriend792
27 күн бұрын
We did not see if that was the cause of the problem. Your video it is not complte. You suppost to shows us that the problem was fixed.
@scottybeeman7877
2 жыл бұрын
How did you get the harness to remove so easily
@neilgamble6268
Жыл бұрын
You rock 🎉
@berenwarrior6276
3 жыл бұрын
It the fusebox in the same location for a 2001 model ? And what fuses do I need ?
@albeb1925
2 жыл бұрын
,
@deivecoutinhokacio8560
3 жыл бұрын
Boa noite. Estou com um problema na caixa de fusível pt Cruiser 2.4 16V alguém que possa me ajudar a importa peças pro Brasília!!
Пікірлер: 32