The motor mount was installed upside down. The flat is supposed to be facing the top. That is why you were having trouble lining it up, and had to jack the engine up higher
@npolite22
2 жыл бұрын
I feel bad for whatever customer had this done incorrectly to their car. Honestly this video should be removed. There are two way better videos out there.
@danielwillliams9669
Жыл бұрын
@@npolite22 I thought it looked funny. My mind said to me, after market parts can be so different. Thanks for pointing that out. It's still hard to believe that it is even possible to install that upside down.
@joseirizarry8256
2 ай бұрын
Excellent video and explanation, blessings bro. 🤗
@gqautodiagnostics
2 ай бұрын
Thank you for the kind words and God bless you too 🙏
@looies6197
9 ай бұрын
Thank you for the video! Followed yourl instructions to the T.. worked perfect! Keep up the good work!
@cabininthewoods7326
Жыл бұрын
@9:42 when he takes out strut mount you can see it was installed wrong, mechanic put it back the way he found it. I just looked at my 2009 altima and the pointed corner of mount does aim up. Someone before this repair had installed upside down.
@prestonlowe9394
Ай бұрын
Could this cause a loss of power? I have one with a cracked mount and I have to apply 1/4 throttle to get it to move.
@itsdarito
11 ай бұрын
that rubber piece that goes on top of the larger mount is upside down; most aftermarket ones have it the wrong way (for some reason) the oem one is flipped
@theWittyginger
Жыл бұрын
About to give it a shot. I was told the bracket is stripped where the bolt goes into it from the strut mount. Can you buy a proper bolt or bracket seperately
@gqautodiagnostics
Жыл бұрын
Hello! You should be able to buy the bolt or the bracket. Keep me posted
@rexracer537
10 ай бұрын
Great video. Thx
@jesseangel7964
Жыл бұрын
What are all the tools I need for this job
@audreyhamilton2228
7 ай бұрын
What mount is this called or what part #
@mariorubio1709
Жыл бұрын
you put it in the wrong position, the straight part is going up
@gqautodiagnostics
Жыл бұрын
I know, thank you for the comment. I haven't been able to fix that part of the video. Have a great day and God bless you 🙏
@mariorubio1709
Жыл бұрын
you need to put a 2 by 4 in between the oil pan and the jack, come on man you better watch some videos before you do something
@gqautodiagnostics
Жыл бұрын
Thank you for the advice, much appreciated.
@npolite22
2 жыл бұрын
Forgot to use threadlocker
@Yuralittlebitchn1gga
Жыл бұрын
Shits for pussies just impact it on
@johnnysins4158
9 ай бұрын
Hello all, I hope that I can get some help with the transmission mount.. When I try to take the top bolt off of the stud, the rubber mount turns with it. I only turn it a bit because I don’t want to break anything. But if I tighten it back, it tightens and won’t spin. I think the nut, stud, and rubber are moving together. What can I do?
Пікірлер: 21