Wow, hearing “smack my bitch up” sent me through a wave of nostalgia
@BIGTONY2132001
11 жыл бұрын
After the supercharger install my son installed a camshaft ,headers, fuel pump and some other goodies and it now makes just over 700 rwhp!! fun to drive!!
@BIGTONY2132001
11 жыл бұрын
vezzarn whats more impressive it will go over 185 mph and click off a mid 10 second 1/4 mile pass @130 mph and still get over 20 mpg in a 3800# car!
@Shipwreckedwretch
13 жыл бұрын
Great video. Just chose the EForce for my '11 2SS/RS Can't wait for the install.
@skatesrock
10 жыл бұрын
"sounds good...quite" hahaha I had to laugh at that even through the audio it's anything but quite. Sounds great!
@BIGTONY2132001
11 жыл бұрын
dronc55 the only thing you need to worry about is how are you going to afford to keep tires on it!! shop around for pricing (i own quattro racing i do sell e force superchargers and if you are interested in a price i can shoot you one) and its a pretty straight forward install edelbrock put this kit together better than i think gm could have done! have a friend help you lay the new kit out and read step by step as you assemble it on the vehicle.
@BIGTONY2132001
11 жыл бұрын
John it comes with Edelbrocks program, but we dyno tuned it for max power. We also added a cam, headers and fuel pump. It now makes just over 700 rwhp.
@bdgangster015
7 жыл бұрын
Anthony Quattrocchi what are the cam specs and what kind of exhaust is that?
@HeyThereItsMinecraft
3 жыл бұрын
Hello I got a nightfury cam will it work with this super charger ?
@BIGTONY2132001
3 жыл бұрын
@@HeyThereItsMinecraft 233/242 .629"/.629" 113+3 The Night Fury camshaft is a very potent grind for those looking for maximum peak power it would work great with a supercharger!
@HeyThereItsMinecraft
3 жыл бұрын
@@BIGTONY2132001 where did you get your super charger from ?
@AutoYoung
11 жыл бұрын
@gt40x4 look at it. That aftermarket one wouldn't fit it's too long. You have to use the stock air box with the silicone coupler they provide.
@BIGTONY2132001
11 жыл бұрын
took my son and i approx 9 hours we are both ase cert. mastertechs.
@vezzarn
11 жыл бұрын
That is very impressive!
@gabrieliannozzi7935
11 жыл бұрын
How did you the the fuel management r? did you dyno tune or does edlebrock supply a tune with the kit? Really looking forward to this kit. its seems as good as stock lsa
@Squiffpwn
11 жыл бұрын
Great job, guys.
@jar145022
5 жыл бұрын
What is the pulley diameter do you now how many lbs of boost it makes? Just wondering if you used the included one or a smaller for that additional horsepower.
@amitapextgi
12 жыл бұрын
amazing video...
@chevyhs
13 жыл бұрын
Guys, that was a great video. People should learn from this.
@dronc55
11 жыл бұрын
i bought a new 2013 ss 6 speed car about 2 months ago and now ready to install the eforce. so im wondering is there any thing I need to worry about before I purchase this kit and also what cam and tune is your son running now.
@robbymontg
12 жыл бұрын
Very good vid!
@gt40x4
12 жыл бұрын
why did you put the stuck intake back in and take out the aftermarket one you had in there originally?
@dronc55
11 жыл бұрын
yeah that would great if you would price it to me and where is your shop located I may come to you for the install. thanks again
@Keflynn63
13 жыл бұрын
When you purchased the kit did it come with colored (pictured) directions?
@Cheyenne818
12 жыл бұрын
heey, how did it function in long term, did you got any problems after the installation? and would you recommend me putting the same SC to my SS?
@angelo_giachetti
3 жыл бұрын
Im wondering why you guys chose the Eforce?
@BIGTONY2132001
3 жыл бұрын
Angelo!! This is my sons Camaro and I believe at the time, since the car was brand new in 2010, Edelbrock E force was the only real bolt on charger for this car???
@KRINK8111
12 жыл бұрын
dam really thank you and nice video by the way
@Cheyenne818
12 жыл бұрын
Thanks!!!
@HawaiiVenom392
7 жыл бұрын
did you beat the hellcat yet
@KRINK8111
12 жыл бұрын
What exhaust does the camaro have sounds nice
@cesar1981f
10 жыл бұрын
Nice
@jpazbarber9165
10 жыл бұрын
which is better, supercharger or procharger?.
@javonbrunson1278
8 жыл бұрын
may seem like a dumb question but im new to supercharger installation lol. why did you have to drill into your harmonic balancer?
@BIGTONY2132001
8 жыл бұрын
not a dumb question, the crank is drilled and pinned to keep the balancer from spinning due to the extra load of the supercharger! the factory balancer is pressed on without a keyway. thanks for watching!
@bobjohnson7972
5 жыл бұрын
I have the exact same car with exact same supercharger haha
@ghostyxo2839
3 жыл бұрын
hows that supercharger working out for you any problems?
@Cheyenne818
12 жыл бұрын
and how much did it cost you the whole thing
@vezzarn
11 жыл бұрын
What sort of fuel mileage is he getting after that (if he can drive conservatively? :P)
@silentprofessionalfitness1334
8 жыл бұрын
What all is done to your car?
@KRINK8111
12 жыл бұрын
your welcome!!!!!!!!!!!
@roadruner0007
11 жыл бұрын
So how much power did u gaining
@lowpro87
8 жыл бұрын
hi im installing one on 2010 camaro im at the part were u drill hole in the crank am I drilling 1 or 2 holes?
@BIGTONY2132001
8 жыл бұрын
one hole! crank pin prevents the damper from spinning on the crank under load.
@lowpro87
8 жыл бұрын
+Anthony Quattrocchi ok thanks pretty easy kit to install
@BIGTONY2132001
8 жыл бұрын
+lowpro87 it's pretty easy, just follow step by step instructions. it's a good 9 hr job. my son and I are both master techs which made it easier but we had a good time installing it.
@lowpro87
8 жыл бұрын
+Anthony Quattrocchi nice cant wait tell the test drive lol.... I love working on this ls engine
@BIGTONY2132001
8 жыл бұрын
+lowpro87 best engine out there!
@sdpikapp
9 жыл бұрын
Any issues in the past year of he install?
@BIGTONY2132001
9 жыл бұрын
Thomas Clemente Its been maintenance free since the install. We have added a cam, long tube headers, fuel pump, head work, dyno tune and numerous other items and it now makes almost 700 rwhp. very fun to drive! thanks for asking.
@jamesm2499
7 жыл бұрын
out of curiosity what fuel pump did you go with? and at what point do you need to have the heads worked (hp wise)? I have a 2010 ss with 19k miles that I am fixing to install with my son. I currently have long tube headers, exhaust, cai. any other additions I should do while doing this to make sure it is a safe setup?
@BIGTONY2132001
11 жыл бұрын
Still getting approx 23 mpg on the highway!
@ericdiaz5831
5 жыл бұрын
How much was the labor cost ?
@BIGTONY2132001
5 жыл бұрын
It's my son's car and we are both certified mechanics so labor was free. Edelbrock says it's about a 14-hour installation job but we didn't in about nine hours.
@2-meanls3s56
5 жыл бұрын
@@BIGTONY2132001 where you guys located at ? And how much it would be to install this same s/c on my 2010 m6 ss
@BIGTONY2132001
5 жыл бұрын
@@2-meanls3s56 30 miles south of Chicago
@noahsimmons4107
4 жыл бұрын
Anthony Quattrocchi quote me on an install cost! I live in Iowa so not far at all from ya
@jennihanitsch6644
8 жыл бұрын
OMG this guy made the techs lives miserable. I was a tech years ago and the worst was when people watched everything you were doing.
@BIGTONY2132001
8 жыл бұрын
jenni who are you talking about?
@bigdoo350
8 жыл бұрын
+Anthony Quattrocchi he was talking about you lol
@BIGTONY2132001
8 жыл бұрын
+88TransAmGTA lol I only worked in that place for a day and it was on my son's car! I'm a tech and I wouldn't make techs lives bad anyway!
Пікірлер: 63