The programming on this simply ended up being the secondary option by using a USB thumb drive so I left out by pulling the side of the console and using the main USB input
@FordBossMe
3 жыл бұрын
This could be programmed one of two ways through the cable I showed you or through a USB thumb drive and it just so happened the USB thumb drive is the one that ended up being
@louiemoscatel585
3 жыл бұрын
@@FordBossMe I watched a video recently replacing the APIM. The unit was purchased from a junk yard as a unit from Ford is north of $700 and on BO for eternity apparently. Anyways, the used APIM did not require programing at the time of installation.
@FordBossMe
3 жыл бұрын
You may be able to get away with that but you never know what you're getting so you're at the mercy of them then this video should suffice for removal and installation for the normal person if they want to go that route and that's it but there's an SSID SSI and it's programmed through the process so everything knows what's online They're available you just have to know how to get them
@louiemoscatel585
3 жыл бұрын
@@FordBossMe interesting, and kind of shady... I like it!
@hankhamadi3410
2 жыл бұрын
@@louiemoscatel585 hi when u got the apim from the junk yard,was it the same id number thats on the old one?and did it work normal?
@ronnieschmidt2849
3 жыл бұрын
you know, at that point i'd be looking for the aftermarket andriod based full screen unit made for these trucks. Their is a full sized screen out that integrates that whole panel including the HVAC controls for around 700. Im just not a fan of the Microsoft Sync. Love the Vids, I definitely owe you one.
@JensKirch76
3 жыл бұрын
Wish I could just get decent priced and preprogrammed parts to swap out my Sync2 and throw in a Sync3 Apim and Screen so that I get the advantages of Android Auto.
@FordBossMe
3 жыл бұрын
Sync 3 isn't worth dog water, sync 2 and 1 were so easy to fix sync 3 is a nightmare
@hankhamadi3410
2 жыл бұрын
Great video,and nice explanation.i have 2014 ford explorer xlt,and the screen is frozen,nothing works on the touch screen,but I still have some features work through the steering wheel like radio,seek back and forward,and thats it.now if I buy the apim with the same id number thats on the original one,will it work without programming?
@jjmcg9688
3 ай бұрын
I’m doing the same, what did you find out?
@chadburnett9158
5 ай бұрын
Quick question. I have none of those issues but I have a 2012 explorer xlt . It's doesn't have the Sony one. But mine will turn off the air while driving or vice versa, it will switch from heat to air on its own. Auto setting isn't on
@manthis22
Ай бұрын
How much does Ford charge for the programming?
@hotrodjoe568
8 күн бұрын
My dealer charges 1 hour of labor to program it, which is $190. I'm still wondering if I want to spend the $650 my local shop wants. Or chance it with a used $120 FCIM, plus the cost to program it.
@Gleb1986Kiev
3 жыл бұрын
Good video I will share it.
@haroldnoell3281
11 ай бұрын
You just saved me over a grand dude! Worked like a charm, thank you so much!
@danielmoreira497
Жыл бұрын
I have a 2011 explorer and the screen went black so I replaced the module as you did with a used one I got off of eBay and the screen comes on now but button function is all whacky. Do I have to take it to a ford dealership to get it programmed correctly? And will they for sure be able to program it correctly even though it’s used from another vehicle? I spoke to a gentleman from the dealership and they wanted 180 bucks to do it and he said that it could fry it…
@FordBossMe
Жыл бұрын
Yeah it has to be programmed
@Fireship1
3 жыл бұрын
I’d like to see you program it, just to see how long it takes, and how many steps go into it.
@FordBossMe
3 жыл бұрын
The next one I'll do a video, it was easy today
@FordBossMe
3 жыл бұрын
sometimes it takes a long time
@andaborrachopancho
Жыл бұрын
Having issues with a 2015 Ford Focus, needs FCIM, if i buy one used, does it need programming?
@FordBossMe
Жыл бұрын
Yes
@fitchef40
2 жыл бұрын
Hello, my hazards will not turn off and mechanic says there's no fix for button? 2011 ford explorer. I I was told replacing the interface would work. Any advice on what to purchase would be greatly appreciated. Ford dealer here take 2 months to get it looked at. It is driving me crazy
@FordBossMe
2 жыл бұрын
Unhook the negative battery cable for about 10 minutes and then plug it back in and tighten it down
@fitchef40
2 жыл бұрын
Yeah, that's been done 3 mechanics in, time to replace components I take off cables every nite til next day now for weeks
@juanenriquez9542
2 жыл бұрын
I have a issue with my 2011 Ford Explorer, screen says powering off to save battery then goes black and the heater is on full blast and I can’t control any thing. I swapped out the apim but does the same thing any suggestions? @fordboss
@FordBossMe
2 жыл бұрын
Where did you get the apim and has a factory reset been done You may need a screen as well
@FordBossMe
2 жыл бұрын
Apim needs programmed also
@bryanchevytruck87
3 жыл бұрын
What you recommend looking at on my sync 3 in a 19 f350 if my gps stopped working and the bluetooth doesnt remember my new phone, i have to connect it manually evrytime i start the truck.
@FordBossMe
3 жыл бұрын
Master reset in settings
@FordBossMe
3 жыл бұрын
Make sure your phone is up to date as well
@jamesclemons4984
Жыл бұрын
Same issue on my daughters 2011. Screen would work then not work then work again and finally black. Had dealership diagnose and they are telling me it is the FDIM/Display screen which is contrary to everything I have read which indicates APIM failure. What are your thoughts on this. I have a new APIM I plan to put in and do not see any reason the FDIM/Display itself would be bad.
@FordBossMe
Жыл бұрын
99.9% of the time it is the accessory protocol interface module and it's not the front display module
@jamesclemons4984
Жыл бұрын
@@FordBossMe replaced the APIM and everything works again. Radio, climate controls front and rear, backup camera, etc. The only things that don’t seem to be working properly are the heated seats, don’t seem to heat up and only 2 of the 3 lights illuminate, volume increase and decrease does not show up on the screen like the climate control does. Is this a small issue that needs to go to Ford to get programmed? If there was a way for me to program it that would be great. For the most part it was plug and play and the important things already work correctly. Feel like I wasted money at Ford yesterday with their diagnosis since they were wrong. I messaged them and told them it work with the APIM and all they said was that their pinpoint test showed it was the display. Thanks for the video, very helpful for sure
@Dbillz13
10 ай бұрын
You can find videos on updating it for free with a flash drive and also programming it specifically to that vehicle with its VIN etc and add those functions like heated seats etc using FORSCAN.
@Dbillz13
10 ай бұрын
@jamesclemons4984
@19Dennis53
Жыл бұрын
Someone put the steering wheel on the wrong side!
@FordBossMe
Жыл бұрын
No, it looks that way because of the front facing camera recording
Пікірлер: 40