Thank you very much. There's a lot of people showing you how to replace the bushing. But not a single one of them was showing you how to remove it from the mounting bracket. And obviously you cannot see what's on the backside of the mounting bracket. You're a godsend thank you very much
@gqautodiagnostics
Жыл бұрын
Thank you for taking the time to post your comment. I do appreciate it. I am glad to hear that the video helped you to get it fixed. Have a great day and God bless you 🙏
@AmrikSingh-rw6ew
Жыл бұрын
Saved me roadside tow. Thanks for uploading
@gqautodiagnostics
Жыл бұрын
Hello, thank you for sharing your experience. I appreciate it. Have a great day and God bless you 🙏
@michaelraleigh-co7og
10 ай бұрын
Ah finally, now I know how to remove the cable to press in a repair bushing. Thank you very much. Blessings to you too, Brother!
@gqautodiagnostics
10 ай бұрын
Hello! Thank you for posting your comment. Have a great day and God bless you 🙏 Please, subscribe to the channel.
@pontsdailyonts
Жыл бұрын
This video saved me so much money! I thank you!
@crystalramos2739
10 ай бұрын
TY, this was absolutely helpful. 💯
@nicholasoconnell7732
11 ай бұрын
The one problem I have is where you cut off the camera. I'm having trouble with the brass piece
@oscaranaya6446
2 жыл бұрын
Thanks a lot and very good video
@gqautodiagnostics
2 жыл бұрын
Thank you for the comment 👍👍
@williambotts635
3 ай бұрын
Thank you
@truevinefilms7189
Жыл бұрын
Thank you for your help
@gqautodiagnostics
Жыл бұрын
Thank you for posting your comment. Much appreciated. Have a great day and God bless you 🙏
@dafli123
Жыл бұрын
Good job Thank you so much
@gqautodiagnostics
Жыл бұрын
Hello. Thank you for the comment I do appreciate it. Glad to hear that you liked the video. Have a great day and God bless you 🙏
@haroldbrown9603
2 жыл бұрын
Nice work bro
@gqautodiagnostics
2 жыл бұрын
Thanks. Glad to help.
@danbrennan4335
3 жыл бұрын
Very helpful thanks
@gqautodiagnostics
3 жыл бұрын
I am glad that the video helped you. Please consider subscribing to the channel. Thank you
@birdsong985
2 жыл бұрын
@@gqautodiagnostics my mother has a 2000 grand prix her shifter cable is bad per the shop they been lokking for over a week for one at junk yards and looking online now. I am terrified cause she does not have money for new car if we cant find one. What do you suggest and thank you
@emilybrothers1202
Ай бұрын
Any hacks to getting that c clip back on tight?
@richardlopez5214
2 жыл бұрын
Thank you for a great video you just need a better camera and God bless you
@pezzyp3472
2 жыл бұрын
Thanks
@smallcardealer8264
3 жыл бұрын
Thank you so much
@gqautodiagnostics
3 жыл бұрын
You are very welcome! Thank you for commenting and please consider subscribing to the channel. God bless.
@smallcardealer8264
3 жыл бұрын
@@gqautodiagnostics I lost the tiny clip on the inside 5:06 . Do you know where I can find a replacement?
@amandaadams2001
Жыл бұрын
My 2009 Chrysler sebring is stuck in park. The Shifter cable is stiff and too long to connect to the shift linkage. I’ve tried popping the hood and manually hooking it back on but the springs on the shifter cable won’t contract so I’m not able to connect it. I’m assuming Either the cable is stuck Or out of position or the shift linkage. The cable just seems too long almost overlapping the linkage. Any tips or advice? Thank you!!!
@gqautodiagnostics
11 ай бұрын
I am sorry for the late respond. Check the fuses and the brake pedal switch. Keep me posted!
@MrTonymhoon
Жыл бұрын
Will this help if my impala. I can reverse but will I enter drive gear it won’t move forward at all. Thanks
@Rjj2721
Жыл бұрын
If reverse is the only gear your car moves in it's more then likely toast unless it say needs the shift solenoids.
@trellcarlton6653
3 жыл бұрын
Does the bronze clip go back on or it's doesn't matter?
@fandechavalones3022
2 жыл бұрын
Yes it does
@adanr150
2 жыл бұрын
Do you have the front cable assembly video to shifter
@gqautodiagnostics
2 жыл бұрын
No, I do not.
@antoneshathomas3070
2 жыл бұрын
What about putting the new cable on there is it the same way as you took it off?
@gqautodiagnostics
2 жыл бұрын
Hello. Are you talking about replacing the whole cable from the shifter inside of the car?
@ran3om591
27 күн бұрын
@@gqautodiagnosticsyes
@aliyahhoneycutt6686
2 жыл бұрын
What if I want to replace the whole cord how do I undo the other end from transmission
@shiny.voltorb
Жыл бұрын
Hey sorry if this info is coming really late but literally all you do to disconnect it from transmission is pop off the bushing from it that he shows really early on in the video. It sits on top of the transmission within easy eyesight standing above the hood. Long metal thin bar connecting to small yellow bushing, can’t miss it.
@RobertBrown-co8gp
2 жыл бұрын
I’m having trouble with the other end inside the car.. the cable is shorter in one spot then the one that came off the car
@aliyahhoneycutt6686
2 жыл бұрын
Did you figure it out?
@dmtmachineelves
Жыл бұрын
My car won't shift out of drive into neutral park or reverse. Is it a cable issue?
@gqautodiagnostics
Жыл бұрын
Check the fuses first. Keep me posted
@SabasCastro-ij8ug
Ай бұрын
If in my 2010 Impala it only goes into reverse and first and second, third and fourth, can't it be the cable?
@gqautodiagnostics
Ай бұрын
Hello! A 2010 impala it seems that only have four forward gears and one reverse gear. Please give me more information. Thank you.
@josephnovasakjr4334
3 жыл бұрын
When I was taking out that small bronze clip ... I freaking dropped it and cannot find it.... is there anything I can do?
@gqautodiagnostics
3 жыл бұрын
Call the dealership and ask if they sale just the C lock
@josephnovasakjr4334
3 жыл бұрын
@@gqautodiagnostics okay thank you. Diddnt even think of that
@alexcastro6843
2 жыл бұрын
find it or buy another cable
@fandechavalones3022
2 жыл бұрын
5:14 how do i put it back on ?
@symairalexander7136
Ай бұрын
where do i find this piece
@keyylynch4204
3 жыл бұрын
What is that small clip called ??
@gqautodiagnostics
3 жыл бұрын
Hello. Some people called C lock or a lock retainer. Thank you for commenting. Keep me posted and please consider subscribing to the channel. God bless 🙏
@joserenteria1580
3 жыл бұрын
How do I make the wire lock into the clip?
@josephnovasakjr4334
3 жыл бұрын
I dropped that small ass clip also. Now I’m stuck
@errtex
Жыл бұрын
Being a “truck guy”, I spent all night watching KZitem vids that had me looking at the shifter, shifter solenoid, speed sensor… shifter would move, just not leave Park gear. BAM!!… I watch this video, take a look under the hood and see end of the cable completely off of the link… that little white bushing is completely gone. I wonder if the bushing can be replaced or will I need to buy that entire upper cable you changed out in this video?… that would be too easy, right? Anyway, I missed a day’s shift at work, but luckily you & your video helped shield me from a repair bill that I know would have cost me a lot more of my money than a missed day of work. Thank you!
@6nzchencho752
7 ай бұрын
Would this cause a no start
@gqautodiagnostics
7 ай бұрын
Hello, thank you for posting your question. If the transmission doesn't go all the way into the park it can prevent the car from starting Let me know if you have any other options. Have a great thanksgiving and God bless you 🙏
@6nzchencho752
7 ай бұрын
@@gqautodiagnostics so I feel like is it going in park because the doors unlock. But at the same time two months ago I replace the alternator. And it wasn’t starting. So bam I slam it in gear and it starter right up. So I’m not sure if that could be it. I read a bunch of forums it could be the ground to the transmission. So I’m going to look at tomorrow in the morning. Hopefully it works. I swap relays and still nothing. And I know ignition switch don’t usually go bad
@wendellworth353
2 жыл бұрын
You did not need to replace the cable. There is a kit to replace just the bushing.
@gqautodiagnostics
2 жыл бұрын
Thank you for posting your comment. You are correct! Unfortunately, customer wasn't able to wait few extra days to get the bushing. Have a great day, and please consider subscribing to the channel and God bless you 🙏
@JuanGarcia-yx7kd
Жыл бұрын
I bought the bushing but it still does not shift to park
@dmtmachineelves
Жыл бұрын
@@JuanGarcia-yx7kd did you figure it out I can not get into park or neutral or reverse
@LilYox
Жыл бұрын
How do you disconnect the cable & put it back on where is that video
@hellpandart4133
3 жыл бұрын
Thks for the video u just need a better camera
@gqautodiagnostics
3 жыл бұрын
You are welcome. Yes. I do
@cammims7645
3 жыл бұрын
Should have showed the Part Number!!!
@gqautodiagnostics
3 жыл бұрын
Hello. Part number is 25940463 1133J. Is the lower shift cable Original Equipment Manufacture OEM
@cammims7645
3 жыл бұрын
@@gqautodiagnostics Wonder if all impalas are the same. Hope this works on my 07 impala SS Probably go pull this from the junkyard to save a lil doe!
@cammims7645
3 жыл бұрын
@@gqautodiagnostics Thanks!
@DIY-dv7xj
3 жыл бұрын
Do u think the cable is the same size for the shifter on the drive colum and the shifter in the middle next to the seat I'm about to 5.3 swap my v6 Impala police car but the shifters are in different places
Пікірлер: 72