All I can get is really hot heat even in the summertime. The blend door was jammed. I had taken it apart found the gear was busted and I show you step-by-step what I went through to get this fixed. I decided to change the motor because it was only $30, I bought the gears locally. The most important thing is shaving the torque bed so you can get it up inside to loosen the motor.
Be careful, and mark how the old gear came off there is alignment marks it won’t matter anyway, because the motor calibrate itself for position
Please know the damage to my finger as I didn’t feel comfortable getting channel locks on the stock door. Once I took the motor off the gear that was on the door. I couldn’t get it to move it was stuck. I had twisted it so hard with my fingers that it actually cut me. I gave it everything I have to pop that door loose That’s why I came up with turn the heaters on full blast let it heat up for a couple minutes and then try to turn it and then it came loose and was moving freely Don’t worry about lining up the garage perfectly as it is a stepper motor, and it will go through its motions, and when it feels resistance by its current draw, it’ll set itself 
Негізгі бет Автокөліктер мен көлік құралдары 2011 Dodge Durango BLEND DOOR REPLACEMENT
Пікірлер