Just got one for my 2008 GSXR 750 and it worked great besides the smaller starter cover at the top leaked a lot. So I swapped out the cap and o-ring with my OEM parts I just removed and no more leak. For the stator cover, I used the aftermarket gasket that came with it with some silicone gasket maker. Which I found out later they say not to use it with a gasket but it worked out. Also the backside of the starter that pushes onto the starter with an o-ring was all painted inside which made the clearance off and I had to sand the paint off on the inside for it to fit. It also didn’t go on as far back as the OEM cover which made me nervous so I also put more gasket maker on that. And the flat surface on the back of the stator cover that the gasket sits on had paint on two different spots that I had to carefully sand off in case it caused a leak from an uneven surface. Overall mine worked out with some extra work and this was really due to the fact that I had a track day in two days. If you have the money, I’d go with an OEM or high end aftermarket cover.
@uslipping
2 жыл бұрын
Glad to help
@art_by_adrian2913
Жыл бұрын
had the same problem now mine is leaking from somewhere Idk where though but yea I had to sand it down a lot I over filled my oil had a ton of white smoke and emptied some out and I'm just ready to ride again lol but the leak is coming from somewhere I gotta figure that one out
@AustinWoll
Жыл бұрын
@@art_by_adrian2913 nice, best of luck finding your leak!
@art_by_adrian2913
Жыл бұрын
@AustinWalle thanks so much I need it lol I completely stripped it down and just finished rebuilding so we shall see how it goes
@iwatchvideos6406
10 ай бұрын
@@AustinWollI’m having a leak coming from my stator cover do you think it’s the cover and the bolts are tight enough and needs to be replaced ?
@ChrisRon1k
2 жыл бұрын
Make sure to lock Tite those 3 inside stator bolts too. They come loose inside the housing, can tear shit up.
@gee37jr60
Жыл бұрын
Yo I bought this and my there’s no thread for the “fill plug” . Yours had it ?
@art_by_adrian2913
Жыл бұрын
It's a little hex screw stuck down in there I freaked out too lol
@gee37jr60
Жыл бұрын
@@art_by_adrian2913 dude i found out after like a couple weeks lol it was so fucken annoying I thought it didint have a thread
@THEBOILEDONE
3 жыл бұрын
Just ordered this cover for my 07 gsxr 750 and im waiting on it now.did it leak any? I was kind of skeptical at first when buying it but for 45$ i was taking the chance
@uslipping
3 жыл бұрын
No problem make sure you buy OEM gasket .. don’t use that aftermarket one that comes with it
@THEBOILEDONE
3 жыл бұрын
Thanks man yeah I got the OEM gasket and o ring for the starter cover
@uslipping
3 жыл бұрын
@@THEBOILEDONE good
@THEBOILEDONE
3 жыл бұрын
Hey man i got my cover today and there is paint around the gasket surface.do i need to sand the paint off?
@uslipping
3 жыл бұрын
@@THEBOILEDONE I didn’t have that problem with mine but try not to use nothing too sharp like a razor blade.... 3000 grit sand paper should work ... very light pressure
@404_riseup
2 ай бұрын
Is that the one off Amazon?
@uslipping
2 ай бұрын
No …eBay
@chrisnoname3829
3 ай бұрын
That the one off eBay?
@uslipping
3 ай бұрын
Yes
@chrisnoname3829
3 ай бұрын
@@uslipping how you like it? Looking into getting one for my 750. Found a small leak off my old cover
Пікірлер: 40