Stock rails on these cars look so weird. Their shape and whatnot. Should be a fast ride. I'm jealous. I bought my rotating assembly from JDM. Never had them tune yet. Back in the day Jim said he wouldn't tune E85 so that was pretty much all I needed to hear at the time. They have some wicked fast trucks. They hold the 2.3 Whipple lightning record to this day I believe.
@zweifelgarage1817
2 жыл бұрын
I agree on the rails weird shaped but great capacity for stock! I will add a lightning to my collection of vehicles some day!
@605BOLT
2 жыл бұрын
@@zweifelgarage1817 hell ya. Extra capacity at pressure is a good point. My lightning has basically a stock 4.6 style rail on it so it can drain down quick.
@davedave2882
2 жыл бұрын
They make a spray paint that is specifically for radiators, that does not hinder the performance of the cooling.
@zweifelgarage1817
2 жыл бұрын
Never knew that! Thanks for info!
@davedave2882
2 жыл бұрын
@@zweifelgarage1817 no problem maybe somebody will post something.
@peterscott2097
Жыл бұрын
Good vid ..How’s it going ,very nice car .. I have a question I am in the process of installing a whipple Gen5 3.0 on my GT500 an was wondering if you used Blk RTV sealant on the lower intake then installed the whipple .. Just thought I would ask ya .. Nice Ford garage 👍
@zweifelgarage1817
Жыл бұрын
I used “right stuff” it’s a better sealant imo
@peterscott2097
Жыл бұрын
@@zweifelgarage1817 Ok . I was thinking of just using the Vmp boost loc gasket for high boost . Are you running boost levels above 15 pounds , I just don’t want an issue with chasing a vacuum leak . You look like your very particular about your builds an though I would ask if you felt comfortable about using RTV on such a critical part when adding such a bigger blower ..Thanks Pete
@zweifelgarage1817
Жыл бұрын
This car is on 17 lbs. the right stuff won’t blow out I promise
@peterscott2097
Жыл бұрын
@@zweifelgarage1817 Ok so you ran abeed of that right right over the whole lower intake gasket then installed the whipple …Seems crazy but I’ll take your word
@peterscott2097
Жыл бұрын
How’s it going I have the blower on my car .. Thanks for your support .. I have a question it looks like you have some 10mm bolts that you used underneath the elbow on the drivers side did that come with the blower when you bought it or did you get the bolts somewhere else … I need to use the 10mm bolts that you used ..Thanks
@zweifelgarage1817
Жыл бұрын
I decided to do that myself as there is no way to get an Allen head wrench under there
@peterscott2097
Жыл бұрын
@@zweifelgarage1817 ok what bolts did you us ..if you remember
@peterscott2097
Жыл бұрын
Did you just get them at the hardware store or did you order them from somewhere
@peterscott2097
Жыл бұрын
@@zweifelgarage1817 Ok here’s you video we’re did you get this 10mm bolt ..
@zweifelgarage1817
Жыл бұрын
Yes I brought an Allen one with me matched it up for thread pitch. Also got it little shorter
@austynburfeind3319
2 жыл бұрын
Damn sick recaros bro where'd you get em
@zweifelgarage1817
2 жыл бұрын
Some dude got rich off me 😂😂🤙😅
@austynburfeind3319
2 жыл бұрын
@@zweifelgarage1817 oh is that right? 😂
@ryansvt
2 жыл бұрын
Did you sell the TVS?
@zweifelgarage1817
2 жыл бұрын
My car is a 2011 so it’s an Eaton factory. It’s in my attic lol
@ryansvt
2 жыл бұрын
@@zweifelgarage1817 my bad I glanced at the engine bay when it was stock and looked like 13/14 TVS for a sec lol.
@johnkeeney1554
2 жыл бұрын
Dude, the music was loud af and then you start talking and I can't hear a word.
@zweifelgarage1817
2 жыл бұрын
Ya I was still learning how to edit lol. Was one of my first vids
Пікірлер: 26