amzn.to/2L6obdd Sil-Glyde
amzn.to/2R7rdUb Brake Caliper Compression Tool
This tool is sometimes helpful if the screwdriver or pry bar trick doesn't push the caliper all the way in.
amzn.to/3oMVGUi - Milwaukee FUEL M18 3/8" Ratchet
amzn.to/2ZBs7u5 - GearWrench Torque Wrench used in video
amzn.to/3auswUN - Mission Automotive Brake Caliper Hooks
amzn.to/36FtOei - Wagner QC465A Ceramic Disc Brake Pad Set (This isn't the kit I used, but this one looks like it comes with all the hardware.
Just a quick video showing how I replaced front brake pads & rotors on a 2011 Honda Civic.
Tools Needed:
Large flathead screwdriver or small pry bar
12mm socket and/or wrench
19mm open end wrench (for the square end of the slide pins)
Torque specs I found online: 25 ft. lbs for the front caliper slide pin bolts. (I recommend checking that in your manual to make sure that's correct.)
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song is 'Fat Caps' by Audionautix
Fat Caps by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Artist: audionautix.com/
As an Amazon Associate I earn from qualifying purchases.
Негізгі бет 2011 HONDA CIVIC - HOW TO REPLACE FRONT BRAKE PADS - DIY
Пікірлер: 20