Couldn't find a shop to "rebuild" replace solenoids etc.. Shops were quoting me $3500 - $4600 to replace transmission. . . . . . THANK YOU SO MUCH FOR SHARING THIS!!!!! :) God bless you.
@Michaelsbackyardmarina
Жыл бұрын
Thanks for sharing
@southernmost9429
2 жыл бұрын
I know this video is a couple years old but I am so glad you made it. I had all the same symptoms yours had. From a stop, engine would rev but no engagement till there was a clunk and a jerk and off you go. I just finished my solenoid replacement project. It took about 12 hrs. I'll drive it probably 500 miles this week so I'll get a good feel for how it responds. Thank you for posting this video and making content for those of us who are not afraid to get our hands dirty. Spent maybe $150 in parts. Shop probably woulda charged me $1500. Thanks Again!!
@Michaelsbackyardmarina
2 жыл бұрын
for sure, thanks for watching.
@redwater4778
2 жыл бұрын
Did this problem cause your car to go into "limp mode"?
@southernmost9429
2 жыл бұрын
@@redwater4778 no it fixed the shuddering from a complete stop. I would press the gas and it would act like it couldn't "catch" the first gear. Hope that helps.
@redwater4778
2 жыл бұрын
@@southernmost9429 Yes, it helps me with my diagnosis and thanks for the quick response.
@waltercastro2015
Жыл бұрын
@@southernmost9429 I have a similar problem. But is it affiliated? I release the brake pedal and let her engage on her own then drives fine. If I quickly move to the gas pedal from the brake pedal. Does make a cluck and jerk and drive. BUT also I notice at the stop light, the RPM slightly drops at fine hair move feels wants to choke down.
@DavidDarnell-ep4be
6 ай бұрын
I am about to do this on my 97 GTP . Got it jacked up and started on and I've been looking for a video for months showing me what all I need to do... So thank you very much as I just happened to come across your video this morning! Very informative! Thank you
@josephmarino5938
2 жыл бұрын
This is one of the BEST videos I have ever seen. I mean it. Thank you for this.
@Michaelsbackyardmarina
2 жыл бұрын
Wow, thank you!
@leonardpeil6997
3 жыл бұрын
Started this same project 3 days ago,ordered the same stuff and now playing the waiting game,but hope to get the same results when finished...Great video!!!
@Michaelsbackyardmarina
3 жыл бұрын
Good luck! Mine has now cracked the 13,000 miles since repair and is still working as it should
@leonardpeil6997
3 жыл бұрын
@@MichaelsbackyardmarinaIt's a friend's car for his daughter,she gets her license soon,so I'm hoping it at least last her threw high school...A 07 Buick Lucerne with the 3.8 and 4T65E... Side note,Kids drive better cars then we ever did,in high school.🤔😂😂
@alexrodriguez4241
3 жыл бұрын
Did u find the parts easy? And how long did it take u
@nathaenwanta6452
Жыл бұрын
Just did this today on my ‘11 LT with 143k on it. Had the same problems you described. Took about 14 hours; did it in one shot (boy am I sore) but your video was a lifesaver. Let’s hope this does the trick.😁
@Michaelsbackyardmarina
Жыл бұрын
Would be interesting to hear back if it fixed it. Mine has gone 39,000 miles since the repair. I'm about ready to change the fluid again. Thanks for watching
@nathaenwanta6452
Жыл бұрын
I’ve since put on about a thousand miles going to university and back on the interstate, as well as driving in town and it since hasn’t had any problems with the shifting like before. Ended up replacing the steering rack too since when I was down there I noticed the boots had a good amount of fluid in them, so got that taken care of the next day with some help and got it aligned, but now it drives great for being 11 years old it floats down the Highway.
@clsumjr
3 жыл бұрын
I have an 06 chevy impala with V-6 engine. Just spent 3300 dollars for wear and tare stuff. The mechanic told me over the years I've taken good care of this car but stuff will wear out eventually and then you have too kick out some money. It was worth now the car only has 140800 miles on it and still running very good even the gas mileage is very good.
@Michaelsbackyardmarina
3 жыл бұрын
oh yeah, my average mileage is 27mpg
@donaldtaylorjr9878
4 жыл бұрын
About to tackle this same procedure this week. Great video!
@Michaelsbackyardmarina
4 жыл бұрын
Good luck!
@danielrodas9942
4 жыл бұрын
Thank you sir for this great video, you Saved me $2,800 for a Reman. Trans. + Labor. About (3) mths. ago I purchased a 2011 LTZ w/ 118.4 k. (currently @ 120.0 k). After a month driving it; same exact issue with my Transmission (4T65R) has come to the forefront of my Car Issue(s) list. It's very noticeable when street driving; accelerating from a full STOP/or Red Light....transmission engagement delay (btwn 1k - 1.5k RPM) for a few secs. and then a sudden slight jerk forward and the car proceeds forward. No issues on freeway. Now I know the solution, all thanks to your video. Cheers!
@christianmonet1297
2 жыл бұрын
Did u end up replacing the solenoid/sensors? If so did that fix it or help or not? I bought an 08 SS with 113k and it was fine but I knew the ATF had never been replaced so I replaced the filter and fluid. Then it started doing that, every so often, from complete stops. never at any other speed, and it started shifting a bit more noticeable into third. I'm assuming the solenoids got dirty/plugged when the old came out and new fluid in.
@floresjuan5021
4 жыл бұрын
I was watching your video I have a 2011 Impala I having problems with my transmission making some grinding noise when I put it in gear that's when it starts grinding
@LH81633
3 жыл бұрын
Start cheap!!!! Check all fluids!!!! Change air filter use fuel injector cleaner, check plugs! Replace of bad!! My impala has 264,000 miles drives like a champ!! Had gear slamming abs/vsa lights on replaced all four wheel hubs!! Now all is good!! Wires weren’t frade! I started small ended up being wheel hubs!!!
@Michaelsbackyardmarina
3 жыл бұрын
Thanks for the tips!
@beaubridgeman5522
3 жыл бұрын
You fixed gears slamming by fixing wheel hubs?
@danielpalmer5138
4 жыл бұрын
this is the best video I have seen for changing these solenoids.
@Raymond-rr5iv
3 жыл бұрын
Great video ❤👍💯 !!! I've got a Chevy Impala 2015. It's a 6-speed transmission do you suppose it's the same thing ?? Should I change the transmission fluid every 30,000 miles ?? If you change the transmission fluid will that prevent having to do a rebuild like you did ?? Do the solenoids just go bad from age ??
@Michaelsbackyardmarina
3 жыл бұрын
solenoids just are bad for these transmission. I change mine every 50K miles
@alexrodriguez4241
3 жыл бұрын
Hey I'm having the same problem. Mines a 2013 six speed. Did u find out if the solenoids fixed it ?
@cotichase
3 жыл бұрын
I love my impala for comfort. Huge car & trunk. Fast . Bose speakers ( my favorite ) . But I will say the trans on my 2011 impala has gone out 3 different times . First one was off the factory line , direct from GM that lasted about 40k miles , old lady owned it . It died. Then they put in a new one , that lasted 40k with my sister owning it and taking very good care of it . Then I was on my 3rd trans before 100k miles …….. when I owned it & still do own it. GM claims it was the way I drive the car - that’s why 3 different owners have had 3 different trans , because of the way I specifically drive it ….. yea ok GM . Just admit you made shitty defective parts & still do , certain cars get them other cars are lucky & never have the issue. GM makes billions of $$ . I had to pay $2,500 for a rebuilt trans. So yea love the car HATE GM.
@Michaelsbackyardmarina
3 жыл бұрын
quite the story. I did this job on mine at 124k and now it's at 147k and going strong.
@Yo_itsKing
2 жыл бұрын
Mines is out in the garage right now. Tbh I'm thinking of junking it...more than once is too much for me...kudos to you ..I'd never get a GM again
@circletech7745
Ай бұрын
This car was the reason I bought a toyota Prius specifically to avoid transmission issues. The prius has the most reliable transmission ever made in a passenger car.
@mltndeal5120
2 жыл бұрын
Thanks for the video it was very informative. I been working on my friend's 2006 Chevy Impala. Recently the transmission Gave out. But I'm going to swap out the transmission from another Impala my friend purchase. Watching KZitem tutorial videos I've learned alot about replacing all kinds of parts. Its fun fixing vehicles. 👍
@cedricrandall7377
3 жыл бұрын
Great video use awesome on the stains it works good on motor parts!😎
@Michaelsbackyardmarina
3 жыл бұрын
Yes it does!
@jameybarisoff
2 жыл бұрын
How did you diagnose that the solenoids were the problem?
@Michaelsbackyardmarina
4 жыл бұрын
500 miles later and it is performing perfectly. Well worth the effort.
@danielwilliams9997
4 жыл бұрын
If I take it to a mechanic anybody have an idea of what I’m looking at to fix. It’s an 07 Impala giving off the p1811 code
@Michaelsbackyardmarina
4 жыл бұрын
P1811: Maximum Adaptive and Long-Term Shift Times OBD-II Trouble Code The P1811 diagnostic trouble code usually appears when the transmission control module detects an unusually long shift time. On average, most acceptable shift time parameters are set at 0.6 seconds. Anything longer will cause the TCM to raise the line pressure, which will cause usually harsh shifts. How Serious is the Code? A P1811 diagnostic trouble code means the hydraulic line pressure has been raised to compensate for excessively worn clutches or other components. If left unchecked, this excessive line pressure can cause serious damage to other control components, making a small problem a lot worse. Symptoms Symptoms of a P1811 include: Longer than average shift times Unusually hard shifts Causes Failing pressure control solenoid/EPC solenoid Worn clutches Worn accumulators Excessive valve body wear Malfunctioning MAF sensor causing lowered commanded line pressure How to Diagnose the Code? The first step to diagnosing a P1811 DTC is to examine the condition of the automatic transmission fluid. If metal fragments are present, the problem is most likely a failed hard part like it clutch pack or drum. If no issues are discovered with the ATF, then further investigation will be needed to determine if the problem lies with a failed pressure control solenoid. Common Mistakes When Diagnosing One of the most common mistakes made with diagnosing a P1811 diagnostic trouble code, is automatically assuming that the pressure control solenoid/EPC solenoid is to blame. If the vehicle has a lot of miles on it, it may be wise to investigate the transmission for signs of other issues that could cause this problem. What Repairs Will Fix P1811? Replace pressure control solenoid/EPC solenoid Replace worn clutches Replace worn accumulators Repair valve body Replace MAF sensor
@Michaelsbackyardmarina
4 жыл бұрын
This was all from 30 seconds of google search
@chrisw5150
4 жыл бұрын
@@Michaelsbackyardmarina my impala slips after coming to a stop in overdrive. Its not the clutches because if you shift it manually its solid as a rock. It does this after i stop at about 9 outa 10 times Im not good with computer searches, id appreciate your thoughts. Thanks in advance
@laxus5795
4 жыл бұрын
Chris I have the same problem. Did you find out the issue ?
@alfredourbina1774
Жыл бұрын
I have a 2008 chevrolet impala 3.5 engine and is making a grinding sound what could be the problem
@Michaelsbackyardmarina
Жыл бұрын
Where is the grinding coming from?
@alfredourbina1774
Жыл бұрын
@@Michaelsbackyardmarina transmission
@johnmills837
3 жыл бұрын
Just cut the brown wire to the TCC solenoid. The duty cycle is wearing the TCC casing material to clog the passages near the valve. Design flaw. So the converter doesn't lock up, so what.
@Michaelsbackyardmarina
3 жыл бұрын
I can't do it. It's been work fine now for over 14,000 miles.
@Ccyawn123
10 күн бұрын
Spray some brake clean on a green scrubbing pad and it will clean the gasket surfaces without gouging them
@marshallmcfarland7555
6 күн бұрын
I would like to know where you ordered the parts from I’m having the same problem with my imp à la and I already changed the transmission one time. I don’t wanna do it again thank you I’m gonna keep on watching and keep on liking and hopefully you’ll get some more people
@dhonnoll78
2 жыл бұрын
Don't know if you mentioned it I fast fowarded it through sections, Clean just common grease like chassis grease, bearing grease isn't going to kill your transmission, you can take a little bit of grease smear it on the gasket (particularly that o ring gasket around the output shaft) and let that hold the gasket in place while you hold that thing sideways and put the cover on
@Michaelsbackyardmarina
2 жыл бұрын
Sure could, Thanks for watching
@markthomas9703
3 жыл бұрын
God bless you are a hard working dude explained everything. Great video.
@Michaelsbackyardmarina
3 жыл бұрын
I appreciate that!
@LBS-qw8gf
2 ай бұрын
That weird i got 134000 on my 2011 Impala and it runs like new. I keep good care of it. I only thing i had to do is change the oil and brakes plus 2 wheel bearings. I find they are a good winter car with snow tires on. Very comfortable too.
@agmc4me
3 жыл бұрын
I had a 04 impala with 3.8. Trans had problems. I tried the shift kit fix and it worked. Sure it was the solenoid but I did not want to drop engine. I don't know how the shift kit fix fools the solenoid but it did. It shifted so smooth if you did not watch tach you did not know it was shifting. Gave car to my son who put it in a guard rail. Not worth fixing after that. I hope you used quality parts. Great job.
@Michaelsbackyardmarina
3 жыл бұрын
I did use all name brand parts. So far so good 15,000 miles later.
@whatsit2ya247
3 жыл бұрын
I saw in the comments that you were having a delayed or abrupt shift from a stop, and possibly other issues. I'm having similar issues, mostly the rev and "slam" into gear while at a stop is my main concern, but only when warm and only sometimes, very odd if you ask me? Question, was yours intermittent also, or everytime you drove it or?? Also I have no codes/dash lamps. Thanks for the detailed video, and any advice!! I'm probably avoiding the obvious but don't want to do that if I don't have to 🤷 Thanks again!
@Michaelsbackyardmarina
3 жыл бұрын
Mine was intermittent. and no codes
@VictoriaColletti-p8z
4 ай бұрын
My impala slips only when im at a full stop trying to accelerate it jumps once its passings 2 on the rpm should i try to start with a sollienoid fix i do have a transmission leak i need to get to also
@harpreetsaroya4148
2 жыл бұрын
I have an issue with my Impala, when I put it in Drive mode, it is not going forward but in reverse it runs really well. Can you please tell me why is this happening and what is wrong with this?
@Michaelsbackyardmarina
2 жыл бұрын
I honestly couldn't tell you. Sounds like it is a little more serious than just the soleniods.
@janraats
3 ай бұрын
Foreward band is broken
@noelrodriguez8937
3 жыл бұрын
My car sort of hums and it sounds to me like it comes from the transmission. I have all D,R,N1,2,3 I can use them all BUT when I press on the accelerator it revs to about 3.5-4rpms.
@Michaelsbackyardmarina
3 жыл бұрын
interesting. How many miles on the fluid that is currently in it.
@kevingathers4845
4 жыл бұрын
Great video and commentary best wishes to you!!👏👏👍😎
@Michaelsbackyardmarina
4 жыл бұрын
1500 miles later still working perfectly.
@Ccyawn123
10 күн бұрын
I like real-time feels. I dont live for excitement.
@bradjames6748
2 жыл бұрын
It's an absolute travesty that General Motors did not issue a recall campaign for this problem......
@Michaelsbackyardmarina
2 жыл бұрын
I guess it wasn't that much of a safety issue. Thanks for watching
@danielpalmer5138
4 жыл бұрын
what was part number on the tcc solenoid?
@mrpachongo
4 ай бұрын
hi, i wondering if this parts number apply to 2008 impala ss ?
@Usmanthemecano
3 жыл бұрын
Beautiful video! Did you get your parts straight from the dealer? Or do you have a link for them?
@Michaelsbackyardmarina
3 жыл бұрын
I got them from Napa and Amazon. All AC Delco parts is what I used.
@alexrodriguez4241
3 жыл бұрын
@@Michaelsbackyardmarina what parts did u have to order thru amazon that u couldn't find at Napa?
@mjrapreactions403
2 жыл бұрын
No reverse sir help you are the greatest transmission GOD I ever seen man you did your thing bro help me I have no reverse all the sudden it go forward on
@ConleyProduction
9 ай бұрын
The shift code everyone who doesn't have a scanner that can scan the tcm is P1811
@chasedavis2358
7 ай бұрын
Why did you put the jack on the oil pain instead of the transmission pan?
@ronaldgreen5292
3 жыл бұрын
These cars are very underated! They are very dependable and comfortable for the most part!
@Michaelsbackyardmarina
3 жыл бұрын
I really like my impala. Among my top 3 favorite cars
@Crazwolf15
Ай бұрын
What size r the pressure switch solenoid bolts
@maysflowerful
Жыл бұрын
Great video . Can someone tell me how y’all knew it was the solenoids ? My 2011 Chevy is having shifting problems once I put it in drive it make a little noise.
@Michaelsbackyardmarina
Жыл бұрын
I just had mild shifting issues and a little occasional hesitation from a start. Make no mistake the fluid was pink and clean, If your trans fluid is dark and burnt there is a good chance your problem would be much worse.
@zoemobb5490
2 жыл бұрын
My 2007 Impala went out and only drove on 2nd and reverse has proper fluid level and I jacked it up and all the gears were responding normally and the tire was moving. Soon as I jack it back down it only reverses but nothing on the other gears.
@TayeTaylor-k8u
Ай бұрын
U figure out what the problem was ?
@kiarawhite1981
Жыл бұрын
My 2011 Chevy impala seems like it has a hard time shifting it won’t reverse or drive only time it would do it is when I restart my car it would do it then stop. But sometimes when I restart the car and put it in reverse is goes forward and when it’s in drive it reverse then I’ll restart the car again and it do the right thing but it doesn’t last for long what could that be
@Michaelsbackyardmarina
Жыл бұрын
that sounds like a bit of a mess, thanks for watching
@thabushboy
7 ай бұрын
So this takes about 3500 just or….
@5metoo
2 жыл бұрын
My 2003 Buick Regal with 125,000 miles with 4t65e started harsh downshifting from real 2 to 1 when slowing down at a moderate pace. It was at first a clank, and now it is muted but at the right slowdown speed you can still hear it a soft clunk, which it never used to do at all. It doesn't slip and it's shift points seem fine. What do you think that might be?
@Michaelsbackyardmarina
2 жыл бұрын
It could be numerous things. I am not a transmission expert. I just show folks what I was able to do on my machine. Thanks for watching
@ErK1oneZ
18 күн бұрын
My transmission is slipping when I try to get past 30 miles per hour it will rev up but not accelerate. So I release my foot and push the pedal until I have enough of a push to get to the next gear the transmission starts humming when I get up to 40-55 mph sounds like a work out hub but the sound is coming from the transmission itself . I have done a lot of maintenance on this transmission changed accumulator springs added magnets to the pan changed the filter and the tcc solonoid changed the filter and put in fresh oil I even threw in Lucas stop slip and added a transmission cooler . I have no codes on the engine or the transmission no issues detected by the computer what do I do ? To stop the transmission from slipping I’m studying like crazy reading everything I can it’s too expensive to replace and shops will over charge for a rebuild I don’t mind doing the work but I need to know what should I do ? Help please I know the video is old .
@Michaelsbackyardmarina
17 күн бұрын
I'm not an expert, but I do think it's time to replace/rebuild. Thanks for watching
@kentmullikin4309
6 ай бұрын
Great video, my wife has a 2010 Impala 3.5 with 240,000. I need to do this trans service. One question I have is did you have to have the front end aligned after changing the trans solenoids and removing the strut?
@ddemier
2 ай бұрын
I did this exact job and the car shifted wayyyy better than it did. I turned around and sold my SS Impala as they have weak transmissions.
@bradjames6748
2 жыл бұрын
"MADE IN MEXICO" oh no my solenoids are made of cocaine
@Michaelsbackyardmarina
2 жыл бұрын
that may have been the problem LOL
@franktorres807
Жыл бұрын
I like the way you the job would you rebuild my transmission
@Michaelsbackyardmarina
Жыл бұрын
sorry I don't do any customer work. Thanks for watching
@luiscereceres4442
Жыл бұрын
Where did you buy the new gasket
@Michaelsbackyardmarina
Жыл бұрын
NAPA
@BlueCross76111
Жыл бұрын
Was wondering what code you were getting from your transmission prior to replacing solenoids? I just got my car back from a shop saying it was throwing a 1811 code. Which in their words meant complete replacement of transmission. Cost to replace transmission in a shop $3500-$4600. I am wondering if I can do what you have done to buy some more life for my impala. Same year.also
@Michaelsbackyardmarina
Жыл бұрын
No codes at all, thanks for watching
@daltonshirley4087
6 ай бұрын
Would it be possible to include the part numbers for these? Like the gaskets or a link where you bought?
@יוסףכהן-נ9פ
3 жыл бұрын
Do you have part numbers for the harness and sensors ? Thanks alot!
@Michaelsbackyardmarina
3 жыл бұрын
I don't. I would get in touch with your local NAPA store and they can hook you up with all you need.
@damianwalsh3168
2 жыл бұрын
Does anyone have the tightening specs or pattern
@bs9669
Жыл бұрын
Did you ever get the torque specs and which order to tighten the bolts for the cover?
@trintmusser6714
Жыл бұрын
Is there anyway you can post the link too where you bought the kit?
@salomonromero793
Жыл бұрын
Thanks a lot you saved me money !
@Michaelsbackyardmarina
Жыл бұрын
Happy to help
@juanalcocer4399
8 ай бұрын
I know this is an old video but it helped tremendously my impala will jolt every once in a while while driving at low speeds, perfectly fine on the highway and then one day it just stop driving I could drive it for say 30 seconds and then as if it went into neutral no reverse no drive so I did this change the filter fluid and added a Lucas transmission Conditioner whining noise stop shifts perfectly smooth solenoids I got from the junkyard out of a wrecked Impala the harness I just heated up the plugs due to finances but I did get a new gaskets and axle seal inside the pan from AutoZone thank you
@joesmith6524
Жыл бұрын
And u saved$$$$$believe me!I mean u got to change both when u do this job!
@Michaelsbackyardmarina
Жыл бұрын
Glad it was helpful
@lorettabrown8834
3 жыл бұрын
one question? What was your issues to make you change the soleniods? I Have no Drive But have the low gears and reverse
@Michaelsbackyardmarina
3 жыл бұрын
poor shifting and not going into gear from a stop or dropping into gear kinda hard from a stop
@devinrgarcia86
3 жыл бұрын
Same issue, car drives as long as you drive it like a manual , throw it in neutral when coming to a stop
@ronaldgreen5292
3 жыл бұрын
I own the same Chevy Impala mine's a 2007 LTZ model and it's a great car overall but sometimes the transmission in first gear tents the slip a little. But runs, and drives excellent, even with high mileage!
@Michaelsbackyardmarina
3 жыл бұрын
That's what mine was doing
@javierochoa432
2 жыл бұрын
My 07 Chevy impala reverse went out but going forward has no problems…any ideas how to fix the no reverse?
@Michaelsbackyardmarina
2 жыл бұрын
Non at all. thanks for watching
@ricardoguzman3105
3 жыл бұрын
what are all the part numbers from all the solenoids you replaced? excellent video by the way. I feel better about tanking on this project.
@Michaelsbackyardmarina
3 жыл бұрын
It's been over a year now and don't recall all the part numbers. Go to your local Napa store and if the guys inside are any good they can hook you up. My Napa guys here where I live are excellent
@tomilheirobarbalho6117
Жыл бұрын
Good job my friend
@Michaelsbackyardmarina
Жыл бұрын
Thanks for the visit
@ozzyc7174
Жыл бұрын
Thank you for the video I have an Impala that is just starting to do this I want to give this a try but I can't find a parts list in your video did I miss it?
@malikglennmalik1238
11 ай бұрын
Can I do this to see if my car reverse
@Michaelsbackyardmarina
11 ай бұрын
Not sure if it will fix that problem, thanks for watching
@Xbox4life90
9 ай бұрын
Are the solenoids relearn shifts or does the car need to go to a gm dealer for programming
@mattp5565
2 жыл бұрын
Just picked up a side job to do this tomorrow great video man helps alot👍🍻
@Michaelsbackyardmarina
2 жыл бұрын
Glad it helped
@mjrapreactions403
2 жыл бұрын
I don't have reverse please help what do I do change selenoid or what
@jenandjames1
Жыл бұрын
Can you give the entire part numbers having trouble finding them on amazon
@ahoorakia
Жыл бұрын
changed all those old part,but why not the transmission axle shaft seal,that is also old and dry and prone to leak?!
@Michaelsbackyardmarina
Жыл бұрын
it's easy to get to if it starts to leak, been 40,000 miles and it's still dry.
@ahoorakia
Жыл бұрын
@@Michaelsbackyardmarina they may not leak,but the rubber seal is also dey and will crack,after so many years,it easier to change 5$ seal now than go through whole process of disassembling many parts to get to it
@edwinmcnew4389
3 жыл бұрын
A lot of work, but well worth it! Great job sir!
@Michaelsbackyardmarina
3 жыл бұрын
Thanks, Still running over 15,000 miles laters. Was well worth the effort.
@kirkevans9177
Жыл бұрын
Great video. Should tell in the beginning what the symptoms where and why you changed these parts.
@terrellscaife2411
Жыл бұрын
The issue I have with a 2007 Chevy impala is when I try to put it in gear, reverse are forward it seems like the shift mechanism inside a transmission is broke because it doesn’t do anything. What do you suggest?
@Michaelsbackyardmarina
Жыл бұрын
I haven't had that problem so I don't really know what to tell you. Thanks for watching
@martinvaldepena48
3 жыл бұрын
Thank you for the video helps . Do you happen to have a link to the parts .
@Michaelsbackyardmarina
3 жыл бұрын
Sorry I do not.
@EbEb-hs9we
3 жыл бұрын
getting ready to do the same ,what is kit u ordered on amazon ,saw a kit had 5 selonoids
@Michaelsbackyardmarina
3 жыл бұрын
I ordered each piece by the part number as I removed them from the car. There may be a 5 piece kit. I replaced with all AC Delco stuff.
@slitherdurant
11 ай бұрын
Fml
@johnmcgill3541
Жыл бұрын
Mine just went out the pressure control solenoid valve 4
@tntt8567
3 жыл бұрын
Mines just banged in 1st gear and won’t move in drive i have to put it in 2gear to move it has reverse what do you think should I try this looks like it’s worth a shot
@Michaelsbackyardmarina
3 жыл бұрын
Hard to say. On mine I new the fluid had been serviced as it should have been. My problem started gradual and got a little worse. I'm not able to make any recommendations remote. I just show folks what happen to me and almost 30,000 miles later it still works fine.
@Y50-r5e
2 жыл бұрын
I have a problem with my car every time i turn my signal on the beam all of sudden work and the doors lucks and it accelerate for no reason is it electrical issues 🤔
@Michaelsbackyardmarina
2 жыл бұрын
for sure it's a safety problem
@michellehuey9595
2 жыл бұрын
2014 Chevy Impala LTz. Sputter like shifting between 1 and 2. Jo codes no lights. Will this solenoid fix my issue?
@Michaelsbackyardmarina
2 жыл бұрын
hard to say on a case by case situation, all I know is it fixed mine. So many variables to consider.
@charlesburnett5651
3 жыл бұрын
Why did you have to change the transmission control module?
@Michaelsbackyardmarina
3 жыл бұрын
it was shifting poorly
@brycenewman7895
3 жыл бұрын
very cool video great job...
@Michaelsbackyardmarina
3 жыл бұрын
Thank you very much!
@bmxfruit
4 жыл бұрын
This will work on a 2005 Buick lesabre?
@Michaelsbackyardmarina
4 жыл бұрын
If it has the same transmission and same issues and exact same conditions. I now have over 3000 miles on the repair and it works like a champ still.
@justapro797
Жыл бұрын
@RMDCreations I'm curious, how much transmission fluid has to be replaced?
@Michaelsbackyardmarina
Жыл бұрын
8 quarts for mine
@kevingathers4845
4 жыл бұрын
Hey hope everything is still good.i just got my cover of and broke my gasket, would you be kind and relay the part number for it, thanks.
@Michaelsbackyardmarina
4 жыл бұрын
I got my gasket from Napa. I do not recall the part number or have the box it came in. Napa can hook you up
@kevingathers4845
4 жыл бұрын
@@Michaelsbackyardmarina YESSSSSIR I end up going there and got the gasket thanks. All solenoids are in and cover back on and buttoned up. Going to change filter and hubs tomorrow and then test her out. Thanks for the imput.👍😎
@drome010381
Жыл бұрын
Did you have to drain the trans pan to do this? I just changed the fluid and would rather not.
@Michaelsbackyardmarina
Жыл бұрын
I would say that you should but I don't think you need to.
@johnathanbullington9703
Ай бұрын
I always put one drop of Superglue on connector
@baconpranks6005
2 жыл бұрын
I have to do this on my impala and it doesn't look fun. I'd pay for labor if it didn't cost an arm
@Michaelsbackyardmarina
2 жыл бұрын
It's a pain but mine is still going strong 36,000 miles later.
@j.cooper2246
2 жыл бұрын
Well,, did this fix it it's a year later...having same issue.135,000 miles.i change fluid every 40,000 miles
@Michaelsbackyardmarina
2 жыл бұрын
It sure did. 24,000 later still works perfect.
@keysautorepair6038
Жыл бұрын
The only issue is you should have fixed the wires to the wheel speed sensor first thing that is what tells the computer what is going on.
@Michaelsbackyardmarina
Жыл бұрын
Thanks for the tip. I did the wheel wires about 40,000 miles later.
@ernestogaribaldi.5514
3 жыл бұрын
i like your presentation very good i ham traing to lacate my speed sensor for my MHP were will i faind it i have a 2012 chevy impala LTZ 3.6
@Michaelsbackyardmarina
3 жыл бұрын
You can do it.
@scottrussell3206
Жыл бұрын
Did you drain the atf from the pan first? I feel like you'd have to but I never see anyone do it or reference it in any of the videos when taking the side case off
@Michaelsbackyardmarina
Жыл бұрын
drained it after I was done with the side cover work. Thanks for watching
@gilbertcampbell6049
2 жыл бұрын
Was it going in forward or reverse before I'm having problems with Mines not moving at all and I want to know will this help it
@Michaelsbackyardmarina
2 жыл бұрын
mine was driving and shifting but has some hesitation from a stop and some not so sure shifting issues.
@notme8121
Жыл бұрын
You did a good job sir!
@Michaelsbackyardmarina
Жыл бұрын
Thank you kindly!
@brandinboom1161
Жыл бұрын
Nice are these parts number the same for 2002 Chevy impala?
@Michaelsbackyardmarina
Жыл бұрын
Check with your local Napa, they should be able to confirm, thanks for watching
@ep9372
Жыл бұрын
Would this process be the same for an 07 impala SS with the 5.3?
@Michaelsbackyardmarina
Жыл бұрын
if it has the same transmission, I think it would be close
@MysteryScienceGaming
Жыл бұрын
great video, I got a lead on a 2006 impala with only 120k miles, 1 owner, and in limp mode for 2k. It was a grandma's car, in fantastic shape except for the shifting. I think I might buy it now and get it fixed.
@Michaelsbackyardmarina
Жыл бұрын
if the fluid is still pink then this just might be the fix, mine is still going 50,000 miles after the repair.
@jluc155
3 жыл бұрын
This job is crazy.. No wonder ppl just junk these cars , too much labor for something small 🧐
@Michaelsbackyardmarina
3 жыл бұрын
Well for the roughly 12 hours of work and less that $400 in parts, I'm driving one of the favorite I own with no payments. It has now been over 15,000 miles since the repair and still going strong. It's all about choices. thanks for watching and commenting
Пікірлер: 422