Went through like 50 videos. This video has lead me to the culprit that's keeping my brake light on. I put a like on this video as a reward for helping me. This was the only video that showed me why my 3rd brake light wont turn off. Thanks
@armyroc
2 жыл бұрын
Thank you, I was heading toward a switch issue to take care of wifey's 2012 Sorento but with 3 pennies and some duct tape, she's golden. The response to me was "who the hell are you, MacGyver" ? She doesn't need all those details 🙂 GREAT JOB!
@TalesOfTheBarkside1
14 күн бұрын
I just wanted to write you and thank you for this vid. I knew it was something simple (brake lights stayed on). After a hellish three days, with my trustworthy mechanic being a no show, and neighbors trying to help out (battery died cause of the brake lights staying on, then the shift stuck in park after recharging battery.. shift lock release button was missing..had to open center console to manually release the shift from park...then brake lights NEVER turning on...checking bulbs, fuses).. THIS is the video I should have found on day ONE! Thank you so very much!
@reloaderdave
10 ай бұрын
Thanks! I had the “lights on all the time” problem, couldn’t get my old ass under there to look😢, so got wife to look. She didn’t know what to look for. Started shopping for switch, came up on your video, showed her and told her to look for the spacer…she found it in pieces on the floor! Problem Identified. Made new spacer from a faucet washer with the body of a pop rivet pushed through the hole for positioning pin. Puta little RTV on it, stuck it to bracket, and that was a wrap! Your video was well made, good lighting, clear picture and great explanation! So, thanks again for your efforts! Dave Chaney, Baton Rouge La
@Mystic.Virgo.Vixen9
10 ай бұрын
Oh my gosh what a life saver you are. It’s dark out and 90 degrees. I see the grommet on my floor so I used a nickel. Worked perfect. I didn’t know how to turn the brake light off, figured I was gonna drain my battery! Thanks from a Single Mom
@markserlin643
25 күн бұрын
@@Mystic.Virgo.Vixen9 me too!
@markserlin643
25 күн бұрын
Me too!
@donnalinares1738
Ай бұрын
Best video ! 55yo lady was able to figure this out because of your tutorial. Thank you for that. 🎉
@Ryan-pn8xf
2 жыл бұрын
Great explanation and very helpful. My Kia would randomly ignore throttle response and the lights were stuck on. Just as you mentioned, the broken part was on the floorboard. Saved tons of time.
@davidwilson3913
20 күн бұрын
I appreciate this so much. And the crazy thing is today I looked down and I said look like a button broke it looked like a button off some clothes
@mayrasugey3675
2 ай бұрын
Omg thank you so much!!! My battery was getting drained from the lights being on 2 Pennie’s later and they’re off! The parts are super cheap to replace too! Thank youuu single mom
@mikeb.884
11 ай бұрын
Thanks! Exactly what I needed to see. The grommet on my Sorento is nowhere to be found, but at least I knew what part to order after seeing this. Video is close-up and clear, sound is good without any music playing in the background! Thanks Again!!
@TalesOfTheBarkside1
14 күн бұрын
Where did you order the grommet?
@richardgebo8628
2 жыл бұрын
Thanks so much! Found the broken rubber piece on the floor, popped it in and it'll work till I make a more permanent solution. Saved my gf a dead battery in the morning!
@ramiromonsivais9677
9 ай бұрын
Thank you soooo much for the info. Just like you said the little plastic piece was laying on the mat. You saved me a headache. The plastic piece split apart so i glued it back together and then glued it to where it’s supposed to mount. Temporary fix until i find a replacement part.
@thetwistedhealer
11 ай бұрын
This was so helpful! Worked like a charm in my 2013 Sorento. Used the Pennie’s and off it went. Now just have to find that piece that’s missing. Thank you very much for this video!
@regulluz
Жыл бұрын
Thank you!! I was going crazy and it happened exactly as you said. I saw the ring under the carpet.
@bertregino3858
Жыл бұрын
Very helpful! Thank you! You just helped me save a trip to the garage.
@rommelgregore571
2 жыл бұрын
Very helpful bro.. found the broken rubber on the floor.. replaced it with a nuts and bolt.. thanks for the tip
@Danidanii91
Жыл бұрын
Gold. Thanks for the easy fix. Found the rubber piece broken into chunks. 😅
@Jayaar_85
2 жыл бұрын
Thanks to this video my issue happen to be just the grommet falling out and it was just sitting on the floor I put it back on and break lights are now off when my car is off 😆 thanks 🙏🏻
@ries1222
2 жыл бұрын
Thank you so much definitely found the little rubber piece on the floor of the car! Easy fix thank you sooooo much!!!🙏🤳🤗
@alejandroalmarza8447
Жыл бұрын
Excellent information…you are a good teacher
@stevenbarnett5620
3 жыл бұрын
Excellent tutorial. Thank you so much
@beatsbyhof1861
2 жыл бұрын
Great video. Currently having a brake light issue. Part will be here today
@stevelopez6181
2 жыл бұрын
Ty for the info it helped me get my tail light working it was the light switch
@angelluna4003
3 жыл бұрын
From Tampa FL thanks for the info they help me find out the problem 👍
@nickskops7685
3 жыл бұрын
Thanks for your video mate. Just saved me $$!
@natebanivanua8175
3 жыл бұрын
Thank you. Very informative.
@curtdews4691
11 ай бұрын
A true God send. Thx
@tslvtslv6265
2 ай бұрын
Thank you, it s very helpful
@bobpritz7780
6 ай бұрын
Great video! Exactly what I was looking for. Very clear instruction and video, and easy to follow. Well done! A quick question...... Is this method the same for my dad's 2015 Sorento, also? Thanks very much!
@murielyjay
3 жыл бұрын
Thank for the info,in my case was the rubber that breakout and switch system keep the lights on. Thanks for the info.
@nickskops7685
3 жыл бұрын
Same
@enter_eagle
6 ай бұрын
the broken bits are exactly where you said: yellowed, disintegrated, on the floor board. some small object goes there for now but it sure looks like one of those rubber feet for a stool might do the trick.
@miketipton1456
2 жыл бұрын
Thanks for the recon!
@gimmyASMR
Жыл бұрын
Thanks for this video man very helpful 🙏🙏🙏
@nicholasmartin9503
10 ай бұрын
As predicted the broken part was found on the carpet of the drivers side. Temporary fix with black tape and a nickel while I order a new switch and broken part. The switch is still working but the end of the plunger looked worn so it is getting replaced. Fixed after one youtube video. Thanks
@nicholasmartin9503
10 ай бұрын
From reading all the comments, it appears everyone is going with a MacGyver solution. I can't find a name or part number for the broken bumper/grommet/washer thing. Also no picture of what the original part looked like. I don't mind spending quite a bit more than a nickel, but I don't know what to order.
@stephendeleon594
11 ай бұрын
Thanks! The rubber piece was the isse!
@jolenegiron3405
3 жыл бұрын
Very helpful and thank you...
@marlundrasutton2159
3 жыл бұрын
Can you do a video for the headlights. Both my headlights went out at the same time.
@DanielK-tr2ry
Жыл бұрын
I've used the top for a pre rolled joint. The little top fits perfect in place if the pad. If it works it works
@JomikJomikJomik
Жыл бұрын
Thank you!
@rea8755
Жыл бұрын
Thank you for the fix; it worked. Now for the big question: the radio has no sound...dealer wants way too much $$$ any ideas
@trenar4118
Жыл бұрын
Thanks, you saved me tons of money! 2 minutes, 3 pennies and electrical tape! And it also saved me from bothering my husband 😂😂
@ridhajeb2773
3 жыл бұрын
thank you for your helpfull video. could you help me to resolve this problem with my kia sorento 2012: the third stop (in the middle) break light work only when night lightd are turned on. thanks
@gerardortix
Жыл бұрын
Two thumbs up!
@reloaderdave
10 ай бұрын
Thanks!
@natachaphilistin3359
11 ай бұрын
Thank you
@elvirekeva4709
Жыл бұрын
Hello, tx for the video, I am having the same problem, and that small is broken. What can I do to replace it.?
@masrafaelsg
Жыл бұрын
Muy buan solucion gracias!
@haroldreyes7549
Жыл бұрын
You turned nut COUNTERCLOCKWISE, not CLOCKWISE. It is a NYLON Washer, not RUBBER washer.
@jamesholder1976
2 жыл бұрын
Good job.... Velcro works better then penny two sided
@SHCT98
3 жыл бұрын
Thanks for very informative tutorial. I have checked both the fuse and replaced the switch. Still the brake light do not work. Also the lights for the license plate and the fog lights do not work. Any suggestions?
@jamesholder1976
2 жыл бұрын
Might wanna check the bulbs..
@spyderxterra
10 ай бұрын
Thanks. The blown fuse caused Kia to unable to shift as well
@sjanus11
8 ай бұрын
@ spy, you should find a small hole just below shifter and (Mine does it occasionally) carry a small thin screwdriver, and when it happens just stick in and a little button will push back in. , I don't know why it happens, but it does. Oh, foot on brakes and then start like usual. It's called a shift "Lock release" kzitem.info/news/bejne/y6Sf3qJvhaNjpIYsi=9FfE0QY48l-I5wWD
@erinnandstevewilliams6063
4 ай бұрын
I had a question..my third brake light was staying on and so I did find the old grommet was on the floor board but my two tail lights were turning off. So when I replaced the grommet the third brake light turn off when the car was off. But now all three lights won't come on when i press the brake pedal!! Does this make sense? Any suggestions
@blown22
2 жыл бұрын
Thanks so much for this! The brake lights in my '12 Sorento stayed on after I got home from work early this morning, and the cause was exactly what you showed at the start. That off-white plastic grommet cracked and fell apart. I found it in pieces on the floor mat. Is replacing that grommet part easy?
@humble8512
Жыл бұрын
See my response I added just a few posts earlier.
@Karwritter
Жыл бұрын
Plse help i have Kia seranto 2015 i have a error C2130 says brake lamp relay error. Where is the brake lamp relay located and how do i change it? Plse help i have no brake lights and only this car!
@redneckjedi6921
Жыл бұрын
I have 2015 kia sorento and I have brake lights until I turn my lights on at night then I have no brake lights. You got any ideas what's wrong?
@ricrivas8481
3 жыл бұрын
My brake pedal won't go downt to start. What could've the problem
@james-daniellong1694
2 жыл бұрын
my brake light won't turn on when I press the pedal what could it be bulb are new they light up but the second part of the bulb won't get brighter when I press
@RaziaKarrim-vk1tr
Жыл бұрын
Hi i have put a new brake light switch but still staying on
@mobilefishgames3827
11 ай бұрын
Rubber stopper on the brake pedal. Thx
@natachaphilistin3359
11 ай бұрын
Found the broken rubber piece on the floor,just fix it with 2 penis Thank you so much
@jeremyjohnson8128
7 күн бұрын
Crazy fix!!!
@JasonFaulk-wm9xj
Ай бұрын
2018 kia sorento break lights won't come on a top hatch light comes on blinkers work
@asiawilson6814
Жыл бұрын
My two bottom break lights in my Kia Soul won’t turn on at all. The top middle light does. Is this considered a fuse issue or the stop lamp switch ?
@nataliesaribel
6 ай бұрын
did you figure it out? mine is giving the same issue i’m exhausted don’t know what it is. my break lights won’t turn in at all
@XxFEENOMxX31
2 жыл бұрын
Is this what would prevent your vehicle from getting out of park?
@blown22
2 жыл бұрын
I found if that the fuse is pulled out, you can't start the Sorento. If it's already running, THEN you pull the fuse out, then you can't take it out of park.
@spyderxterra
9 ай бұрын
What if our new fuse and fuse keeps popping everytime starts?
@humble8512
Жыл бұрын
That yellow plastic bumber that the brake light plunger rests on will disintegrate on almost ALL Kias after 10 years or more. I've already relaced them on my 2009 Rondo, 2011 Sorento and a friend's 2011 Forte. Just find a piece of plastic or any other hard material about 1/8 inch thick and cut into a circular shape 1/2" wide and hot glue or epoxy in place!
@humble8512
Жыл бұрын
With 1000's of different, more durable plastics to use to make that bumper out of, Kia did a huge brainfart by choosing the material they did!!!!
@keving.4020
8 ай бұрын
Remove clockwise, spins it counterclockwise.
@olegkovalev2680
10 ай бұрын
Hey Dude. Nice greetings from Germany. I have a problem and not break lights at all. All fuses were checked. And software device plugged to the car. It said that the emergency break light relais is defect. So i changed it. Still no break lights. Today i changed the pedal switch. Still no break lights. Can you help me out?
@nataliesaribel
6 ай бұрын
Hello, did you figure it out? i’m having the same issue don’t know what else to check
Пікірлер: 87