The video is really well made and you can do the work by yourself. I had the same codes and was reading and researching before opening the gearbox. Because of your video i was pretty sure my panamera had this problem with the sensors. Replaced the sensors, oil and filter and the pdk was good to go. No coding either which was cool. Thank you for the detail video, keep it going man 👍🏻
@MrBdavis99
Жыл бұрын
Did you have to do a calibration with a scan tool?
@1Gaumer
4 ай бұрын
Do you still have the car?
@sayednasibdar7865
Жыл бұрын
Great video, the best on KZitem! I have a GTS with P1731 en P1732 codes. Thanks for this video!
@vincentp8585
2 жыл бұрын
This video is very interesting. Clearly you have a great deal of knowledge. I think the PDK gearbox is impressive - but there is a big problem, that you have identified - parts. As these cars get older, there are more failures, and it seems like Porsche does not repair, they just replace the entire gearbox - at a cost of $20,000! I hope you do more videos on PDK. Thanks for this one
@greggbruce
Жыл бұрын
guess that's what you get for buying a porsche, LOL buy an old corvette and spend 20k on it and run circles around the porch... just sayin -- but excellent video with very detailed info -- great job !!!
@PhungDuyvo
2 жыл бұрын
Thank you I just replaced my and went very well and car running fine now thank you again
@HectorRodriguez-li5kl
2 жыл бұрын
Hi what was your problem mine doesn’t want to move
@HectorRodriguez-li5kl
2 жыл бұрын
P1731 sensor shit rod gears 4/5 P1732 sensor shift rod gears 6/7
@WildDigger
2 жыл бұрын
Very good video. The job isn't that hard just extremely time consuming. Well done...
@Sports.Car.Fan.1987
2 жыл бұрын
Great video! Skilled craftsmanship as well.
@ThompsonAutoTest
2 жыл бұрын
Thanks for watching!
@rickybobbydastar6534
2 жыл бұрын
@@ThompsonAutoTest great job . How much a job like this cost
@RealJakeJacob
2 жыл бұрын
Hello Thompson, I really enjoyed your video! I’m in the process of changing the sensors too since the car suddenly won’t go forward or reverse. With the codes P1731 P1732 showing up and won’t go away when resetting. My question is after installing everything and closing it up, do I need a system recalibration meaning a transmission reprogramming with a computer? Thanks in advance 🙏🏻
@dbnzt
3 жыл бұрын
Ty for the awesome video!! very detailed and clear
@shownbay
2 жыл бұрын
Hello, I have a 2012 Panamera with the following codes , my question is the rebuild worth it rebuild and time wise, will this fix my vehicle that starts, but will not move. P1731 display sensor shift rod gear 4/6 implausible signal P1732 display sensor shift rod gear 5/7 implausible signal Would love to hear your advice Thank you
@TSQSZS860
Жыл бұрын
Excellent video !!!
@hellbent7062
2 жыл бұрын
3 questions: I have a 7 speed Porsche Panamera Turbo that has a P0871 pressure sensor number 3 (HOK) fault. 1) Is that the AWD Pressure sensor? And 2) Can the AWD pressure sensor be replaced without removing the valve body? 3) Since that distance sensor you replaced is easily accessible from the PDK oil pan, why did you remove the entire transmission just to replace it? I wish I had a tutorial video of you removing that PDK transmission. There's a lot of useful knowledge in that alone. Thanks for the great, informative and very helpful video. I subscribed immediately when I seen this video.
@ThompsonAutoTest
2 жыл бұрын
2) It probably can. 3) The engine coolant manifold between the two cylinder head heater hose connection was leaking and the manifold was replaced while the transmission was out.
@hellbent7062
2 жыл бұрын
@@ThompsonAutoTest thank you so much for the quick reply. I'm about to change out that AWD pressure sensor when it arrives in the mail. and since I don't have to remove the valve body, I wont be required to recalibrate the transmission or use PIWIS oil fill mode. I believe all I will have to do is remove the oil pan (a simple drain and fill) replacing the AWD pressure sensor in the process. Update: Well I just to replace the AWD pressure sensor number 3 and cleared the code. 3 hours, a total waste of time. Car still runs, drives and shifts fine but it wont allow sports mode and the same P0971, 002085 and 00208A codes popped right back up. I dont know what to do at this point. Man, I wish I could get my car to your shop but Alabama it just too far away.
@user-ov8jn9hw5x
Жыл бұрын
very good
@HY4L
3 жыл бұрын
Had this same issue. Wish this video was up sooner, I would’ve done it myself.....
@PhungDuyvo
2 жыл бұрын
Hi What you did to repaired it?
@mattbr5246
7 ай бұрын
what do you do if you just replace the transmission completely? I have bad shift rod sensors. I did everything to try and recalibrate to no avail and found a idk with 75k miles less than mine for a smoking deal. what programming must be done for a seamless install??? Thank you for your time.
@cayman9815
2 жыл бұрын
thanks for this useful information
@andrewoyola4249
Жыл бұрын
Hey Thompson I need to know where you bought the displacement sensor I can’t find it at all I’m having the same exact issue with my Panamera
@PhungDuyvo
2 жыл бұрын
My 2012 Porsche Panamera base model having transmission problems sometimes Dashboard showing transmission faults Sometimes have to wait couple hours then it started work again I used o d pull out code Showing P17F0 dual clutch transmission above upper limit P17F2 dual clutch transmission above upper limit P1731 display sensor shift rod gear 4/6 implausible signal P1732 display sensor shift rod gear 5/7 implausible signal Would love to hear your advice Thank you
@eastchesterauto
2 жыл бұрын
Good morning I was wondering if on the Panamera 4 valve body to transmission has seals. That I should change when I doing displacement sensor. Thanks
@ThompsonAutoTest
2 жыл бұрын
All O-rings and seals are included with the wiring harness with the position sensor and the filter oil pan is brand new and includes the rubber seals.
@jalalm.a.3272
2 жыл бұрын
Great video. Very informative. I hope you post more videos. What’s the part# of the distance sensor, I’m having similar issue.
@marioskalka-ju9ol
11 ай бұрын
Hello Thompson, I really enjoyed your video! I’m in the process of changing the sensors too since the car suddenly won’t go forward or reverse. With the codes P1731 P1732 showing up and won’t go away when resetting. My question is after installing everything and closing it up, do I need a system recalibration meaning a transmission reprogramming with a computer? Thanks in advance
@hellbent7062
2 жыл бұрын
Well, I just to replace the AWD pressure sensor number 3 and cleared the code on my Porsche panamera PDK transmission. 3 hours, a total waste of time. Car still runs, drives and shifts fine but it wont allow sports mode and the same P0971, 002085 and 00208A codes popped right back up. I dont know what to do at this point. Man, I wish I could get my car to your shop but Alabama it just too far away.
@eastchesterauto
2 жыл бұрын
Hi excellent video. I own a repair we 2011 Panamera from another dealership with 89 k miles. I am getting p1731 and p1732. This vehicle won’t move in reverse or drive. Codes won’t clear when you put it drive message comes up to put it back in park. Does it sound like the shift rod is stuck in neutral. In other words. Changing shift rod might work? I going to pop the pan tomorrow to see if pan is clean. Also was going to check the wire from TCM to the connector. Thanks in advance. Haider
@HectorRodriguez-li5kl
2 жыл бұрын
Hi having same issue 🤦🏻♂️🤦🏻♂️🤦🏻♂️
@Ryans69Camaro
2 жыл бұрын
Thank you
@PhungDuyvo
3 жыл бұрын
Thank you Does problem solve ? Where did you bought the sensor? My car have exactly problems
@ThompsonAutoTest
3 жыл бұрын
Certainly solve the problem. Got it from Porsche dealership in Atlanta, Georgia.
@PhungDuyvo
3 жыл бұрын
Such a amazing information Thank you very much These displacement sensors hard to find I ordered but take up few weeks $1450 . Do I need to replace pressure sensor and any boot while doing it ? Valve body gasket etc. Thank you again As soon I finally finish will post update
@ThompsonAutoTest
3 жыл бұрын
No. Unless you have the corresponding false code but replace the pan filter and fresh fluid.
@alexpapadopoulos9514
11 ай бұрын
I have P17D8 P18B4 and P17D1! Anyone can help me what exactly is the problem on my pdk 2009? Thank you in advance
@BB-st5dp
Жыл бұрын
i have the same problem on my panamera 4s 2009 the gears no longer want to go and porsche said to change the gearbox what do you think?
@ThompsonAutoTest
Жыл бұрын
There is a specific set of false code that indicates the problem with the shift fork position sensor. New from Porsche that position sensor assembly is quite expensive. Make sure that is what’s wrong with PDK transmission.
@swurveweekenderz2995
2 жыл бұрын
Great information thank you what scan tool I can used to reset transmission to drive it
@ThompsonAutoTest
29 күн бұрын
@@swurveweekenderz2995 I use Autel DS808.
@eblakely7294
Жыл бұрын
Do you need a system recalibration after the replacement?
@ThompsonAutoTest
Жыл бұрын
I used Autel MaxiDAS scan tool. Clutch calibration is not necessary nor desirable.
@charlieberry6241
Жыл бұрын
Where exactly can I find a replacement sensor?
@AlexContreras-ti8nm
Жыл бұрын
Just did this repair with new part and my car won’t engage reverse
@andrews1867
10 ай бұрын
Where in the US are you located?
@hellbent7066
2 жыл бұрын
I have a question before I purchase about a valve body for sale on Ebay. A dismantler is trying to sell me a valve body taken from a Porsche Panamera Turbo 970 that he claim is in 100% perfect working condition. He claimed he tested it both inside and outside the transmission. Is it even possible for a dismantler to test a valve body without any bolts in it after it is removed from the PDK Transmission? Every T27 and T40 bolt is missing. How do you test it in that condition with no bolts in it while on the bench? Or is he selling snake oil? I also asked him why did he remove the smaller T27 bolts that holds the part together, he said "To clean it." But he never even put the bolts back in it. Does that ruin the valve body?
@svennomore729
2 жыл бұрын
Unless you are standing there while they test the hydraulics, you wouldn't know if the test was actually done. They can tell you anything they want just to sell you the valve body. Personally I don't think a dismantler will remove the valve body and sell it on the side, that means they cannot sell the whole transmission to anyone. Unless that tranny is trashed to begin with, like a cracked case. I will not buy a valve body if it is missing the bolts. And if I don't have a way to pressure test it to make sure the hydraulics are ok before I installed it
@hellbent7062
2 жыл бұрын
@@svennomore729 Thanks. You were right. The valve body turned out to be junk and the person selling it was a liar and a crook. I returned it but he tried to keep half the money. I had to get Ebay involved to get all my money back. I ended up just replacing the entire PDK transmission for $19k.
@ipsrentalproperties
2 жыл бұрын
@@hellbent7062 That is a lot to spend on a new transmission. curious... Why did you choose that route, instead of just changing the sensor wiring harness? Thanks in advance. I just spent $4,500 changing out the sensor .
@hellbent7062
2 жыл бұрын
@@ipsrentalproperties @Matt DeLao Well, thats a long story but the rule is don't ever buy a car (especially a Porsche) if you're either unwilling or cant afford to fix it. I agreed to this before I purchased the car. So, know what you're getting into. I am prepared to fix anything that breaks until I decide to sell it. Plus I love my Porsche. But to answer your question: You're right, 19k is a lot to pay for a transmission but anyone who owns a Porsche Panamera knows that's what they cost brand new and installed. I did see some used ones on Ebay for as low as 3k but no one can be trusted on Ebay for stuff like that anymore. They will lie and say it's in great condition and you wont find out its junk until after you install it nearly a month after you purchased it. Now you have to pay to remove it a second time and still go buy a new one. Sometimes trying to save money can end up costing you more in the end. I wasn't willing to take that risk. The final decision was made after I got 2 seperate independent diagnoses from two different places 120 miles apart. The first opinion was a bunch of I don't knows and maybes. They even said it may be my 4WD system that needs to be replaced for 6k and if that dont fix it then maybe it's the valve body then if that don't fix it then it must be the transmission. Thats over 30k worth of maybes. The second opinion said it was definitely the transmission with 100% certainty. But before I got there I had already replaced the pressure sensor myself. There are 3 pressure sensors. I did change out the the one that the PIWIS Tester identified as the problem (the 4WD pressure sensor) but it didn't work. The other 2 pressure sensor couldn't be removed without first removing the valve body. However, the valve body can't be removed without having to recalibrate the transmission and replace the fluid. That's nearly 2k. This brings up the 3rd issue. What if, the valve body itself was bad? Thats 5k. You don't want to replace all the pressure sensors, wiring harness and the valve body for 6k hoping it fixes the problem then find out you still got to replace the transmission for 20k because the clutches got worn out and you didn't know it until until you replaced all that other stuff. Then I did the math. I didn't want to take that risk and end up paying nearly 27k trying to keep from paying 20k. Not to mention the 4th issue the fact that the transmission had been having issues before that got fixed months earlier. This is likely due to the fact that I forgot to replace the PDK fluid at the 60k mile mark. That's a death sentence. I will change it at 40k miles from now on. But I didn't change it until 80k miles but it may have been too late. 6 months after I changed the PDK fluid the transmission started to lose 1st and 2nd gear and had to be babied until it got into 3rd gear where it drove fine. Then 4WD clutch started slipping when making hard turns. Then the car would build up so much pressure that it had to be put in neutral at red lights or when idling. Then the car would lurch forward whenever you turn off the ignition. All this got fixed with a PDK re-learn and clutch adjustment but that only lasted a few months then it came back worst. This means my clutch may have gotten worn and lost half its life. Now the transmission is not worth fixing if the clutches goes out in 6 months and still have to replace it. This was way too many unknowns to risk repairing a PDK transmission using the process of elimination. The PIWIS Tester was showing codes that didn't make sense even to the experts. Now I have a brand new transmission with new clutches new everything with zero miles on it good for another 100 to 200k miles. Also, I did think about selling it for half its value before I replace the PDK and just buy another Porsche Panamera Turbo but I decided against it because that car could have issues too. So, I decided to just make this one newer. At least I was able to get a 1k discount and a 2 year warranty and I don't have to sell it for half its value.
@ipsrentalproperties
2 жыл бұрын
@@hellbent7062 Thank you for a well said response. very informative. It's crazy with all of the tech we have, when a light comes on in the car, no one is sure what is wrong. And Porsche makes the parts too hard to get to and figure out. Just got my car back today. Sounds and feels good. We will see how long this lasts. I currently have 104K on a 2011 PTT. Fingers crossed. Thank you
@mutthead1444
2 жыл бұрын
Does the transmission have to be removed to do this?
@ThompsonAutoTest
2 жыл бұрын
No it does not.
@mutthead1444
2 жыл бұрын
@@ThompsonAutoTest Thank you
@j3fitnesstraining2023
Ай бұрын
Hi can I call you to ask you a ?
@inuyasha_ani
Жыл бұрын
Anyone know of a reliable pdk guy in Miami?
@lboogie3171
2 жыл бұрын
Are you a available for a message? I’m having some pdk codes
@flyingdutchmanSimon
8 ай бұрын
7 speed?
@keysd31
2 жыл бұрын
I heard you say "How much does this cost" but made no mention of the price? Also how many hours does this job pay?
@PhungDuyvo
2 жыл бұрын
I bought replacement part at gaudin Porsche part for $920 It take 3 mins to do the job Very easy do it yourself
@marcosa6946
Жыл бұрын
@@PhungDuyvo hi how are you I see u had the same issue everyone else is having here I’m also having the same code P1731 p1732 I have a question was the price 1300 or I believe u stated 900$? Also do u have recalibrate transmission with scanner? And do u have to put new transmission oil and filter? Thx man I really need ur advice
@PhungDuyvo
Жыл бұрын
The part I bought from gaudin in Las Vegas $975 Took less than one hour to replaced no need to program anything
@PhungDuyvo
Жыл бұрын
@@marcosa6946 Part is $974 at Gaudin Porsche in Las Vegas and took about 1 hour do it yourself. No program need it.
@marcosa6946
Жыл бұрын
@@PhungDuyvo nice it’s been the biggest stress for me these last 2 months nobody can figure it out finally found the solution thank u
Пікірлер: 68