DUDE YOURE SUCH A LIFE SAVER I WAS PANICKING CUZ IT HAD JUST FALLEN APART AND I THOUGHT I BREOKE IT!!!!! THANK YOU!!!
@billyhensley7486
26 күн бұрын
Just had my oil filter cartridge come apart. This video helped me put it back together. Thank you!
@johncooper326
5 жыл бұрын
George, thank you for making this video! I was changing oil filter in my '15 Tundra 4.6L. Apparently the tube stuck inside the old filter as I was pulling it off .... so, this whole assembly pulled apart and sprung out. With the black plastic cartridge housing I couldn't even see how it was supposed to attach inside, and the order of assembly was not intuitive. Your video was clear and concise ... it was a "life saver" ;-) Next time will be with the metal replacement version. I can't believe Toyota cut corners on this! Thanks again
@DIRT8IKE
5 жыл бұрын
Just wanna say you're video saved me from absolute hell when I accidentally dropped this. My dad would've had it with me if I couldn't have gotten it back on.
@greggwilson8055
2 жыл бұрын
Same here! Parts were flying around and springs were springing. Watched your video and became a mechanic once again for a few minutes. Thanks !
@JustDvoh
9 ай бұрын
Same here. Can’t thank you enough
@emmanuelavendano451
7 күн бұрын
I’m glad I’m not the only one 😂
@scottscheffler2095
5 жыл бұрын
Yes, thank you on this. Like some of the others, I was simply changing my oil filter and the tube came apart on me. And when I saw a spring was involved, I about crapped my pants. Historically that's a bad omen for me. In particular, your video showed me which side the little metal plate went. So, God bless you for this video.
@rickboucher6061
5 жыл бұрын
Thanks for posting this...I was just out changing the oil in my 2015 Tundra and the inside all came apart.....wasn't sure how to put the spring and round plate back together. After watching this, just pushed both tabs flat, reassembled, and used a screwdriver to lift them both up......phew.....now I know!!
@frankgreene8436
2 жыл бұрын
Thanks for this video. My canister assembly fell apart when I was pulling out the dirty filter cartridge, and I needed to know how to put it back together.
@A-Negative
Жыл бұрын
Thank you for this, it wasnt obvious how to out this back together and I couldn't find diagrams. Awesome
@Charvel4ever
Жыл бұрын
thank you i have a 2009 toyota camry and the spring assembly popped off . I watched your video. Tnank you!!!!!!!
@toolman.dustin
Жыл бұрын
Thanks for the video. FYI, without this metal stack, the oil will bypass the filter and not be filtered at all.
@maxwellbayman1904
4 жыл бұрын
Fantastic video. Thank you so much for explaining the filter housing assembly. Just like Dirt8ike_Freak, I dropped my filter housing and the parts flew everywhere. Thought I was going to have to buy a new part until I saw this video.
@WillNoble
5 жыл бұрын
Thank you so much for this video. Couldn't figure out how to change that stupid strainer.
@darrenjaime9662
2 жыл бұрын
Just saved my life dude thank you for the video
@maxsiu6858
2 жыл бұрын
Best video of them all, thank you
@johngreen4200
4 жыл бұрын
How is it that this piece comes out so easily, but is complicated to get back together. Lexus oil changes are overly complex.
@thebrainsick6426
7 ай бұрын
Mine got apart and I assembled it myself but I don’t think I did it correctly is it very bad ?? What wort does that spring do?
@4201bm
2 жыл бұрын
Thanks for the info!
@iOoziE
4 жыл бұрын
Is changing the perforated tube necessary? What happen if you don’t change it? I didn’t change mine
@jadewass5852
9 ай бұрын
What do I do with plastic round bit at bottom should it be moving around or should it stay still
@user-ys6pk7tw9h
4 жыл бұрын
George London. Hi, the first oil change that I did was in the dealer on a use 2013 tundra with low miles in 2018, the second oil change I did myself and I notice that the dealership didn't change the filter, now I am replacing it the third time and the housing is stuck, so I am thinking getting and impact wrench to see if it will come off, I think the housing for the 4.6 is the same for the 5.7. Let me know what you did when your housing got stuck how you took it off?
@greenpepper4338
3 жыл бұрын
Thank you!
@ChickennGritss
8 ай бұрын
Can anyone give the measurements on the metal tube?
@atticstattic
3 жыл бұрын
It actually is possible to remove the core without bending the tabs...
@mitchreive7253
7 жыл бұрын
I like but what was your reason for changing it in the first place. ?
@atticstattic
3 жыл бұрын
Replacing the stock plastic filter housing with the aluminum one.
@jpcarrster
6 жыл бұрын
Thank you
@dng2393
4 жыл бұрын
Is this from Dorman. How is it hold up?, i just got mine and give it a try later.
@FU29988
Жыл бұрын
Have you had any issues since you posted this? I just replaced mine with the Dorman.
@akartsoccer
3 жыл бұрын
I forgot to put the flat coin metal piece during my last service. Does this pose any problem?
@Luis-iq8mu
2 жыл бұрын
Might cause the engine to blow up but other than that not really
@TonysLawnCare215
10 ай бұрын
from the start you did it wrong with that screw driver no knead for that it is a push down and spin it will come right off
Пікірлер: 36