Clean (vacuum or wash) and replace existing filter (don't waste $15 on new useless filter). Drill two small holes and install 2 smallest screws to hold the filter in place (as shown) - so it doesn't slip off, especially in hot weather as adhesive holding the mesh in place melts. This is a must do every 40,000 miles or more frequent if you have pets. Ignoring the above leads to clogged fan which stops cooling $4000 high voltage battery. Overheating leads to premature death of the battery... Filter cleaning and replacement takes 10 minutes and requires only a vacuum and 14mm wrench. DIY fix to secure the filter in place takes 5 minutes, a drill, and a small drill bit and 2 small screws.
- 3 жыл бұрын
2012-2017 Toyota Camry Hybrid DIY clean, fix, replace high voltage battery filter [mesh]
- Рет қаралды 26,389
Пікірлер