Just did it and it worked! I know there was a recall of the wipers but I know it wasn’t the issue. If you are able to move one of your wipers by hand easily then more likely you don’t have to replace the whole wiper trans. For me it was the fuse 25. Thank you!
@ando9732
3 жыл бұрын
This video was a lifesaver. All the mechanic shops didn't even want to look under the hood and help find the reason why it wasn't working. I watched your video and figured out that the relay was missing for the wiper On/Off. I had to special order the part from O'Reilly I popped in the new relay and booyah. It works. Thanks a million.
@red2965
2 жыл бұрын
You are the man I am saving this and subscribing thanks for your information very detailed My 2011 equinox decide to drop the nut from the motor to the linkage today and had to pull it all apart put the nut back on the linkage and then I didn't get the arms time right and I think that might have broke the on/ off relay fuse 25 is still good
@ctuna3360
2 жыл бұрын
My front wiper linkage broke about two weeks ago. I replaced the whole wiper motor assembly last week. My wiper were working but the driver's side was over extendeding. I thought the wipers were wrong so I switched but they weren't. Now my wipers will not come on at all. I replaced all the fuses and on/off relay and don't hear the motor for the wipers??
@gristlevonraben
Жыл бұрын
Did the motor burn up?
@kelseydekemper7662
2 жыл бұрын
How do I disconnect the back wiper motor it's draining my new battery I replaced the alternator as well my battery keep draining
@red2965
2 жыл бұрын
Pull the fuse
@charleswhite3299
3 жыл бұрын
on a 2013 if the fuses are good and the fluid pump still don't come on ! the pump is bad right ?
@red2965
2 жыл бұрын
Right. Unless somehow a rodent chewed your wires somewhere inline but you can use a vom meter and test for current at the plug to determine if that's the issue
@charleswhite3299
2 жыл бұрын
@@red2965 pump went out. Replaced it works now
@ando9732
3 жыл бұрын
I have a one of my wiper relays missing and it's being ordered. Until the part comes in can I swap the position of the speed wiper relay?
@Mr313showtime
3 жыл бұрын
Yyyd BBC
@Mr313showtime
3 жыл бұрын
Iiiiiioo
@Mr313showtime
3 жыл бұрын
Opp pop p
@Mr313showtime
3 жыл бұрын
Opp pop p
@red2965
2 жыл бұрын
Rewatch his video he's very detailed and I fail to see how you missed his explanation that they are two one on/off and a hi/lo and.....NO you can't. You can pull the hi/lo and see if the on/off has a audible click and then know your getting power but, you can also look at your fuse he mentioned and see if the wire goes all the way across both pins. ( Showing it's still good). Salvage yard is the fastest way to get a used one short of the stealer ship.
@celebritybuzz5515
3 жыл бұрын
What if one blade isn’t moving
@red2965
2 жыл бұрын
So by now you've figured out the linkage is broken.
@vickylanding2830
2 жыл бұрын
Thanks for sharing its just the back wiper don’t work
Пікірлер: 20