Thank you for making this video, I trouble with those 2 tabs not going back in far enough to take the bottom cover off. Your video was very helpful
@shugatoast7844
Ай бұрын
I spray all my vehicles, computers , tipm and almost anything electrical with corrosion X spray to help with and prevent corrosion
@yamaharacer114
2 ай бұрын
Extremely helpful and easy to follow, thanks man!
@Tech-28
2 ай бұрын
@@yamaharacer114 hey glad you enjoyed it and I hope you get the truck sorted out
@Tikoloshe-
8 ай бұрын
Thanks for sharing. I had a problem with my truck draining a brand new battery after 2 days. My mechanic checked my alternator but it read good. Could this and/or a faulty fuse cause this problem? Even without showing a fault on the trucks computer?
@Tech-28
8 ай бұрын
It is a possibility, I would do a parasitic draw test to just make sure it’s not in another circuit. I have just posted a quick video on how to do that on a ram truck if you want to go check it out on my channel
@fortier43781
3 ай бұрын
I have a 2012 ram 1500. Lights flicker on the dashboard and engine will slowly stall. Only happens when the highbeams are on. Could the TIPM be the issue?
@Tech-28
3 ай бұрын
@@fortier43781 that’s an interesting one! It’s definitely possible, I mean it would be the first place I would look
@SWATT101
6 ай бұрын
Another good vid...had the no start issue....local CT did the by-passed around the relay with switch...ok..good till the other day where the truck stalled in a no stopping zone...cycled the switch a couple times and it started right up... unfortunately a cop gave me a 110$ fine... didn't believe me lol...where do you send them for repairs? I understand they are 900$ if you can find one.
@Tech-28
6 ай бұрын
I am in Canada, there is a 3rd party company through carquest I sometimes send them too but for the most part there’s a local guy that’s an electronics wizard that fixes them, you can also shop them out to be repaired through online sources and rent one while yours is being repaired or you could try and hunt down a used one at a junk yard or through car-part.com
@SWATT101
5 ай бұрын
Awesome thanks, I'm in Ontario
@jameslogsdon419
8 күн бұрын
I have a 2014 Ram Laramie 1500 i have no low beam or fog light on the left side i need a new TIPM right
@Tech-28
8 күн бұрын
@@jameslogsdon419 it’s possible but maybe it’s just bad wires or bulbs, you’d have to diagnose it to be 100% sure
@LifeWithYBG
7 ай бұрын
I change my starter relay fuse in that box 3 times and they kept going out every 2/3 week in my 2012 dodge ram could this be the problem?
@Tech-28
7 ай бұрын
For sure it could be
@LauraGonzalez-ml8qq
8 ай бұрын
Saw your video. I have a 2019 Ram 3500. Many different warning lights going off on the dash. Do you think replacing the power distribution center/TIPM would fix this problem? Been to the dealer 5 times for the past 8 months. Dealer states since they can’t duplicate the warning light problem, which is intermittent, they can’t fix it.
@Tech-28
8 ай бұрын
That’s a tough one man, intermittent issues are the hardest to solve, I wanna say I doubt it needs the tipm. Sounds to me like you have a pin fitment issue in one of the connectors. Do you know what codes is was setting? I’m gonna guess lost communication with a hand full of modules
@LauraGonzalez-ml8qq
8 ай бұрын
Many miscommunications; for example, while I am driving these warning lights come on-parking brake light, cruise control, fuel gauge needle going wacko, suspension system needs service, traction control, etc. Also, I can’t get the truck to get smogged. Last light left on was the oxygen sensor light. So far the operation of the truck has not been affected.
@Tech-28
8 ай бұрын
Most likely a wiring issue somewhere
@johnharmon3621
3 ай бұрын
@@Tech-28will a tipm out of a 2021 ram Laramie 1500 work on a 2012 ram 1500 Laramie
@Tech-28
3 ай бұрын
@@johnharmon3621 I don’t think it will, I’m almost certain the connector layout is different
@jenellejoshua6485
4 ай бұрын
Will this tipm make ur transmission go in limp mode
@Tech-28
4 ай бұрын
It definitely could
@michaelanthony6785
3 ай бұрын
I have a 2009 1500 ram. I can physically see corrosion . How does this thing come apart without smashing it haha
@Tech-28
3 ай бұрын
@@michaelanthony6785 it takes alot of patience, just watch the video and try your best to take it apart carefully, just take your time and really study the design of the TIPM and how it comes apart
@michaelanthony6785
3 ай бұрын
@@Tech-28 so it does come apart ? What I can see of the circuit board I see corrosion .
@michaelanthony6785
3 ай бұрын
@@Tech-28 any specific tools. I’ve removed the 3 x t20 screws and I can see below but I don’t want to reef. What’s holding it in ?
@Tech-28
3 ай бұрын
@@michaelanthony6785yeah yours is the previous version of the TIPM, have you removed all of the fuses and relays yet?
@michaelanthony6785
3 ай бұрын
@@Tech-28 yes, they are all removed.
@shugatoast7844
Ай бұрын
I spray all my vehicles, computers , tipm and almost anything electrical with corrosion X spray to help with and prevent corrosion the red can !!! the greenish can is too thick
@Tech-28
Ай бұрын
@@shugatoast7844 never heard of it, I’ll take a look
@shugatoast7844
Ай бұрын
@@Tech-28 safe on electronics I even spray the circuit boards and electrical on my HVAC I did a lot of reading and research before spraying all my expensive electrical components. don't take my word for it. Look it up. I think you will like it.
@stanleygiberson9351
9 ай бұрын
Can you just replace the whole part
@Tech-28
9 ай бұрын
Yep 👍 that’s usually the fix
@jagboy69
4 ай бұрын
What a shitty design. WTF were they thinking?
@Tech-28
4 ай бұрын
lol 😂 tell me about it.. I’ve changed probably 50 of those things in the last 5 years and that’s just 1 mechanic, dodge must sell tons of those pieces of crap
Пікірлер: 38