Perfect, no BS and you replaced the gasket that no one ever talks about. Great Vid!
@CraftyWorkshopBuilds
3 жыл бұрын
Thank you, Much respect!
@romanokrasinski8348
25 күн бұрын
Yo thanks! GREAT Vid helped out alot with my Jeep. Sadly, my problem with "limp mode" got even worse...probably because of the $50 part I got on line. Next time I'm getting a part from a reliable source.
@jessesantiago8473
4 ай бұрын
Sir this is the best video I've seen explaining how to do this. After watching multiple vids and doing it my self, I wish I would have seen yours first.
@CraftyWorkshopBuilds
4 ай бұрын
Glad it helped! Thanks for watching
@seronleithian
Жыл бұрын
Commenting for the algorithm but this is a great video simple and to the point and shows all good pictures of what to do and the socket sizes and everything. I never worked on a car at all before and made a super simple for a novice like me.
@CraftyWorkshopBuilds
Жыл бұрын
Much respect I'm happy you found this video helpful. Yea, my goal is to make videos that are easy to follow. thanks for watching!
@ohger1
2 жыл бұрын
LOL, good job. So many youtubers take a 10 minute video and cram it into 40...
@CraftyWorkshopBuilds
2 жыл бұрын
Thanks! Yea, my goal is to make the video's as efficient as possible.
@jasonritter5236
2 жыл бұрын
Quick and to the point and the most helpful part, the bolt sizes.
@CraftyWorkshopBuilds
2 жыл бұрын
I'm happy you got value from this video, thanks for watching!
@charlesconto3154
Жыл бұрын
Great video, very helpful! Keep in mind on certain jeeps they have a three way coolant hose that cannot be easily moved to get to the throttle body. They are still flexible enough to work around though.
@georgemarshall5053
Жыл бұрын
Great Video, this is my issue as of today on my 2016 Jeep Compass.
@rachelwallin5551
3 жыл бұрын
Thank you for making a video ACTUALLY showing how to do it you make it look so easy ❤️😭
@CraftyWorkshopBuilds
3 жыл бұрын
Thanks for watching! Once you follow the steps you will be good to go.
@synthverkstad2093
2 жыл бұрын
This looks easy! My Jeep is currently at the garage for this part playing up.
@CraftyWorkshopBuilds
2 жыл бұрын
It's doable if you have the tools and time.
@lukeswanbury9304
6 ай бұрын
Great vid. Followed this to replace one and it was a massive help. Thanks! :)
@Chreis26
11 ай бұрын
Thanks for the video! I was wondering how the throttle body is holding up? I need to replace it but am concerned with ordering a non OEM
@manvicorgon
Жыл бұрын
good video I recommend removing the battery to have more space and visibility
@stevencrews4084
Жыл бұрын
You were a big help thank you bro
@CraftyWorkshopBuilds
Жыл бұрын
I'm happy you found this helpful, thanks for watching!
@manvicorgon
Жыл бұрын
yes after the part and gasket are changed you have to take the vehicle to a mechanic shop to have it programmed in chicago 11/24/2022 they charged me $90 but its better to pay for programming and not labor
@josephjdesouza
3 жыл бұрын
Perfect. You saved my niece a lot of money.
@CraftyWorkshopBuilds
3 жыл бұрын
I'm happy I was able to help, thanks for watching!
@fj8156
2 жыл бұрын
Hi! I have a 2010 Jeep Compass and I believe my throttle body is in need of replacing, it was replaced about 6 months ago, but the lightning bolt as well as the slip indicator like keeps coming on like it did before I got the throttle body replaced, making the jeep jerk and stall and shake. Would you recommend me following this video for a 2010?
@willt1515
2 жыл бұрын
I had a similar problem with my compass, turns out I just needed to replace the intake plenum gasket
@philipsmith7391
2 жыл бұрын
A very good and accurate video and it even tells us to use the 13 mm wrench to remove the bracket. I am wondering what the specs are on the little red ratchet wrench that he is using, it seems very efficient. Thanks, Phil
@CraftyWorkshopBuilds
2 жыл бұрын
Thanks for watching! Yea, I did a review on the Aoben electric ratchet. It's definitely efficient and helps make the job quicker.
@workphone4810
Жыл бұрын
Very good walk through. Thank you.
@CraftyWorkshopBuilds
Жыл бұрын
Much respect! Thanks for watching.
@derekduenas2932
Жыл бұрын
Awsome, what are the reason to change this? I have same car and experiencing some hesitation upon acceleration and lag. Thanks
@davidbarrios4753
Жыл бұрын
Should it be the same in a 2015?
@protektyanekt5718
Жыл бұрын
same for 2013?
@BigBillMiller66
3 жыл бұрын
Thanks for this video, really well done. Quest: is there a need to calibrate or "educate" the accelerator pedal to the new throttle body and if so, how? Thanks!
@CraftyWorkshopBuilds
3 жыл бұрын
Nah, no need to calibrate. Plug and play.
@Yasunii
2 жыл бұрын
@@CraftyWorkshopBuilds what about on a 2010 keep compass. I order a new throttle body. Will I need to relearn with a scanner?
@alfredzo
Жыл бұрын
@@CraftyWorkshopBuilds Great video, all these years later. Which Throttle Body did you use as the new replacement?
@Jester25ft
4 жыл бұрын
Good stuff bro
@CraftyWorkshopBuilds
4 жыл бұрын
Much Respect
@gvinianidzegivi
2 жыл бұрын
Where can I buy this part ?
@CraftyWorkshopBuilds
2 жыл бұрын
I just added the part link in the description.
@user-cy9rf2vb6s
3 жыл бұрын
I am korean hose fix tool what is name
@MrFoxracingred
3 жыл бұрын
Don't you have to use a computer or something to relearn the new throttle body
@CraftyWorkshopBuilds
3 жыл бұрын
No, reprogramming needed.
@STARFIGHT88
2 жыл бұрын
@@CraftyWorkshopBuilds what about a remanufactured one?
@javiercoronel1169
2 жыл бұрын
No programing needed?
@CraftyWorkshopBuilds
2 жыл бұрын
Nah, no programming needed.
@javiercoronel1169
2 жыл бұрын
Thanks waiting on my replacement just looking for videos , thanks for your input
Пікірлер: 50