Here is the link to Mitchel 1 DIY mentioned in the video eautorepair.adtrk.biz/?a=10817&c=24&p=r&s1=
@markchidester6239
4 жыл бұрын
A cool video suggestion is what do you get with the Mitchell DIY. Code discription? Code set condition? Component location? The extent of the wiring diagram.
@anthonywright9593
4 жыл бұрын
Ha there I was wondering if you know the relay tester model number you used on the Lincoln Town car that had no power to fuel pump I'm doing a similar job on a 2002 BMW 530i.please can you help me? Thanks
@1MiketheMechanic
4 жыл бұрын
Great video SD. The 2007?+ GM trucks have a similar fuse box that has similar electrical problems. Don't forget about Alldata DIY which can be a better deal. www.alldatadiy.com/index.html
@bgregg55
4 жыл бұрын
SD is easily in the top 10 of best YT channels.
@ScannerDanner
4 жыл бұрын
Thank you
@tnamen1307
4 жыл бұрын
@@ScannerDanner Sir, your videos are very very informative and useful for me. Thanks a lot. Meanwhile, my car Hyundai i20 1.2 has SDVC function in the Audio head unit. It controls the volume of the audio playback bead on the car speed. Now, how do I locate this particular wire going to the head unit and read it's signal?? I'm really interested to trace out this wire where it's coming from and going into!!! Please make video relavant to this SDVC wire of any car. Thanks in advance.
@SmittySmithsonite
4 жыл бұрын
If you think this is good, you should see his Premium Channel on ScannerDanner.com!
@shauno3697
4 жыл бұрын
I'd jump for joy that it wasn't an $800+ TIPM out of some Chrysler product. Paul, thank you again for another awesome video. Caleb, you deserve a raise.
@ScannerDanner
4 жыл бұрын
He just got one :-)
@seftonplayer32
4 жыл бұрын
This man is a genius!! He's one of a select few who are willing to pass on their knowledge. It's a godsend!!
@Jpilgrim30
4 жыл бұрын
Most of those GM fuse boxes just have somewhere around a 20 gauge solid bare copper wire as traces to each of the terminals inside. Most of the time one of those copper wires just have a hairline crack in them causing issues like this. It hardly takes any flex at all to gain or lose contact. I take these apart and fix them sometimes to save the customer some money or if availability on a new one is sketchy. I usually recommend a new one but some people really can’t afford it and I’ll try my best to help get them going again.
@lanceratliff8466
2 жыл бұрын
Glad I found this video. I'm having issues with this as well. After watching this I wiggled the relay mentioned in your video And the car started up with no problem. 2012 impala.
@salvadorgutierrezr5914
4 жыл бұрын
Thanks for teaching Scanner Danner and great video caleb , good teaming with father👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@BLACKSSG85
4 жыл бұрын
Caleb you crack me up flashing those answers in the 23rd minute 😂
@cobbysparks9891
4 жыл бұрын
Yeah. That was too funny. 😆
@rp5029
4 жыл бұрын
Great content as always and it's obvious Caleb has really been sharpening his video editing skills! Excellent job, guys!
@matthewzoelle9149
4 жыл бұрын
Great video. I deal with stuff like this all the time on the 2 delivery fleets I service. Funny thing is, I’d probably fix the pins or wire in a bypass temporarily till the new part comes in, and in the mean time the fleet manager would probably cancel the part because it’s working and he figures he can same some money. I have a lot of temp fixes like this that I come back a few months or a year later and find still there. Kind of funny, but I guess that’s how they save money.
@tnamen1307
4 жыл бұрын
I learned a lot with theory and practical from your videos, especially how to find short circuit, diagram reading, and fuel pump system. Thanks so much.
@isalmankhan1
4 жыл бұрын
Yes as always learn something new everytime I watch your lectures😉 Thanks for sharing SD👍 Special thanks to Caleb😎 Stay safe Guy's❤
@markhb3346
4 жыл бұрын
Replaced a few on police cars. Last one was human induced due to coworker jamming DMM leads into the fan relay cavities .. Great video
@kc360awareness
4 жыл бұрын
Thanks again Paul, missed the banter between you and Caleb.
@ScannerDanner
4 жыл бұрын
I don't think Caleb was the cameraman on this one. He did the edits but I don't remember if he was there in person. This video was over a year old, sitting in the archives
@kc360awareness
4 жыл бұрын
ScannerDanner - he was missed. You two make a good team. I know my 16 yr old and I sure do love working together. I find myself sounding a little like you.... explaining to him how things work, how to plan our work, how to find and follow our direction. Thank you for teaching us all.
@tnamen1307
4 жыл бұрын
@@ScannerDanner please kindly make video on how to track SDVC wire going to the audio head unit of any car. I'm interested to find this control wire and read it's signal!!! Awaiting your inputs 😇😇😇
@parochial2356
4 жыл бұрын
Excellent editing and production. Your son is an excellent addition to the SD empire. :)
@ScannerDanner
4 жыл бұрын
He is getting good. Every video he gets better
@tnamen1307
4 жыл бұрын
@@ScannerDanner Sir, your videos are very very informative and useful for me. Thanks a lot. Meanwhile, my car Hyundai i20 1.2 has SDVC function in the Audio head unit. It controls the volume of the audio playback bead on the car speed. Now, how do I locate this particular wire going to the head unit and read it's signal?? I'm really interested to trace out this wire where it's coming from and going into!!! Please make video relavant to this SDVC wire of any car. Thanks in advance.
@fabianthorne6831
4 жыл бұрын
Thanks again Mr Paul Danner and Caleb , for the great knowledge and videos you share with us,much appreciation and respect coming from one of your students from Trinidad in the Caribbean.Y'all keep good and safe,blessings.
@SmittySmithsonite
4 жыл бұрын
Thanks for the Mitchell DIY links - $20 will save someone (like myself) one big migraine! Great stuff as always, Paul. Divide and conquer! For whatever reason, I forget everything when a car is right in front of me, lol. Stage fright! I really need to step back and thinker a while! Great having your videos to see how things SHOULD be done. "Nope - You didn't" ... LOL! You guys are great together! Cracks me up. Laughing and learning - gotta love it! THANKS, Paul & Caleb! 👍🍻
@benbenplus
4 жыл бұрын
The key to success is understanding DTC. If you don't have a description of the DTC and what triggers this troublecode, it's gonna take a lot of time finding the fault.
@Joeelectronicschematicsforauto
4 жыл бұрын
I believe that too many times we rely on the scanner for information that we can infer from the schematic I always like to go to the to the schematic first and see the system but great videos you are a legend in electronics knowledge
@thomaspapa3831
Жыл бұрын
Another GM fuse box fail except my 3 vehicles are 20 yrs old. Another great video.
@8953147
4 жыл бұрын
Voltage drop testing without fancy tools! You guys make a great team, stay safe out there!!
@danielmusat597
4 жыл бұрын
Glad to see you again! I hope to see more often with new videos and stuff.
@BlackWolf-ly4sq
3 жыл бұрын
I'm working on a car now that has, the same problem, however the, burned,wiring was the main culprit, new wiring harness and a new ignition key rotation, fixed it... Good luck 🚘😉
@m.b.smoshitoa8325
4 жыл бұрын
HI PAUL, WHEN I STARTED SEE YOUR VIDEOS LAST YEAR I REMEMBER ASKING QUESTION AND YOU REPLIED " KEEP WATCHING MY VIDEOS BROTHER". AND INDEED I GOT THE ANSWER AS I CONTINUED WATCHING THEM. SO, NEW SOMEONE TO THIS CHANNEL MUST NOT JUST ASK QUESTION. HE WILL MAKE US FEEL BORED. LET SOMEONE STAY FOR ATLEAST A YEAR TO QUALIFY TO ASK QUESTION. HAHAHA HA M.B.S MOSHITOA ( SOUTH AFRICA)
@ScannerDanner
4 жыл бұрын
Did I answer your question though? What I meant was that if my answer to your question was not clear, then keep watching! :-)
@m.b.smoshitoa8325
4 жыл бұрын
@@ScannerDanner I UNDERSTOOD VERY WELL.
@allenramirez2778
4 жыл бұрын
I went thru some rough times, I couldn't keep up with the premium subscription, it's amazing how a lot of the stuff I remember but can't apply cuz I been out the game for a year or so. I just wanted to take the time to let u know how much I appreciate what u do for our community, as an ex felon it's hard to get jobs out here that pay well enough to support my family which I think is the reason a lot of people return to prison, but compared to what my friends that went to a tech school learned, I kill them in speed and accuracy thanks to what u and a couple other people in the community do to help us. Now that things are turning around a lil I can't wait to sign back up to the premium content. Thank you, you have no idea how many people worldwide you've been the difference for, truly helping us/ them put food on the table. Considering ur faith I believe ur walking a righteous path, whether we ever meet or not I consider u a brother.
@ScannerDanner
4 жыл бұрын
Thank you Allen! I am grateful for this comment. It shows a deeper side of the things I am doing and how it can truly change someone's life. But the credit also goes to you! You are the one that grabbed the bull by the horns my friend. It takes a dedication and a desire to improve, and to change, and that part I could not do for you. Let's get you signed back up now okay? Email me, copy and paste both your message and my reply in an email and send it to support@scannerdanner.com and I will open it for you for free to help you out even further. I can also offer you a tool grant hosted by ScannerDanner LLC and AESwave.com where you will be able to redeem the grant at AESwave.com with no strings attached. The resources from this grant are actually coming from my affiliate tool sales associated with AESwave and I am pumping those funds right back into the hands of my community for those in need. Talk to you soon! God bless you brother!
@allenramirez2778
4 жыл бұрын
Thank you very much and God bless. We'll get thru this craziness with faith and our brothers and sisters
@ScannerDanner
4 жыл бұрын
@@allenramirez2778 I got your message in my support inbox. I'll get back to you in a day or two. Thank you!
@wyattoneable
4 жыл бұрын
We can see perfectly. Great job explaining your process, great ghrapics and great editing!
@carolinastringband
Жыл бұрын
Stellar job explaining in detail this diagnostic process! Thanks!
@ScannerDanner
Жыл бұрын
Thank you!
@juliobetancourt5480
4 жыл бұрын
Top notch diagnostic work Great video editing very informative
@ScannerDanner
4 жыл бұрын
Thanks 👍
@tnamen1307
4 жыл бұрын
@@ScannerDanner Sir, your videos are very very informative and useful for me. Thanks a lot. Meanwhile, my car Hyundai i20 1.2 has SDVC function in the Audio head unit. It controls the volume of the audio playback bead on the car speed. Now, how do I locate this particular wire going to the head unit and read it's signal?? I'm really interested to trace out this wire where it's coming from and going into!!! Please make video relavant to this SDVC wire of any car. Thanks in advance.
@ScannerDanner
4 жыл бұрын
You only need to ask this question one time on one video. I've seen it like 5 or 6 times now. I see every comment and this just ends up being classified as spam by KZitem
@hotpackjay
8 күн бұрын
Best and easiest to understand that’s SD
@billyyoder8171
4 жыл бұрын
Thank you Paul and Caleb. Great job. I'd be curious if the 2.5 VDC was actually bias voltage. Unplugging relay and testing the voltage on the fuses would explain it was a bias voltage if you still read 2.5 VDC. By wiggling the relay side to side, hearing the relay clicking, seems the poor terminal fitment was on the coil side of the relay, 85 or 86. Have a blessed and safe week to you and your family.
@ScannerDanner
4 жыл бұрын
Could be! Good thinking Billy.
@nicknicu1787
4 жыл бұрын
You found that pretty fast,great video as always! Thanks for sharing! 👍
@vincescalise4821
4 жыл бұрын
Great diagnosis Paul , Great camerawork Caleb , what a crappy design though for the fuse and relay panel
@annacermed4468
4 жыл бұрын
Hi man, it has been a while. Always fruitful. Thanks a lot, be safe (from Algeria I).
@Autorepairtechs
4 жыл бұрын
Great video paul im glad to see that there are still great diagnosis being performed!
@mdjahidjahidansari6255
4 жыл бұрын
Good job Danner sir
@FixItPhillip
4 жыл бұрын
Good job with the diag brotha! -FixItPhillip
@matthewmcdaniel9600
4 жыл бұрын
Anti theft problem will. Show low voltage.even will crank after changing fuses.
@OzMechanics
4 жыл бұрын
I just recently had an impala with the same issue but actually on the ac clutch relay.
@djjammindave
3 жыл бұрын
HEY DANNER, I THINK THAT'S WAS GOING ON WITH MY 2012 SRX CADILLAC. MY WIPERS AT TIMES SWITCH TO HIGH SPEED, WAY TOO HIGH THAT YOU KNOW THAT SPEED IS NOT NORMAL. MY CAR AT THE MOMENT DOESN'T START. I PUT IN A BRAND NEW BATTERY IT CRANKS GOOD BUT NO START. SCANNER THROW ME A P1682 - IGNITION 1 SWITCH - CIRCUIT 2. AND THAT IS EXACTLY WHAT I SAW IN YOU VIDEO. I WONDER IF IT IS MY PCM (I JUST ORDER ONE) OR THE PROBLEM LAYS ON THAT FUSE BOX. PERHAPS THE RELAY. THANKS FOR THE VIDEO, I LEARNED A LOT FROM OF IT.
@SaadElectric700
4 жыл бұрын
Good job my friend / there is a factory defect in Fuse Box
@jdtractorman7445
4 жыл бұрын
You are recommending the same thing I would, with the wiper issue and those relays basically non serviceable, time for a new fuse block. At least it doesn't need programming. Isn't it crazy to think that some fuse blocks need programming. Something funny too is Saturn Ions have an integrated BCM/interior fuse block as one unit. Talk about begging for stuff to go wrong, LOL.
@Pablo_Automotive
4 жыл бұрын
Another Great Saturday thanks Paul
@arasskanana7144
3 жыл бұрын
You are a good teacher thanks man i follow all your videos on youtube.i thaaaaaanks👍👍👍
@monicaprice8635
4 жыл бұрын
I had a 2010 Chevy impala with 190 + miles on it and the automatic transmission went out and Rameys car dealership in Princeton West Virginia put me a used transmission in with no warranty and before the 197 + it went out again and had it towed to Coles cheverlot and the mechanic teat drove it and couldn't find any thing wrong with it. On the way home 1.2 miles it went to having problems, pulled over to the side of the ride and turned engine off and let it sit and had to have it towed back to Cole's with transmission failure. They refused to be responsible and refused to pay the tow and had to take to a Jasper installer in Bluewell West Virginia and traded the old transmission for a Jasper transmission that cost over $4000.00 labor and all. The mechanic at Miller's in Bluewell West Virginia (Dean Miller) installed Jasper transmission and started car and backed it out of the garage and transmission was making a racket. Mr Miller checked out the module and said the wire came undone from soder and fixed the problem. A year plus went by received in mail a recall about the Chevy impala wire can I recommend my money back from GM. Very caring citizen concern Anthony Price. What must I do to get my money back on the recall. Thank you. GOD BLESS
@edwinlomonaco6754
4 жыл бұрын
Had this exact issue with a Chevy Blazer SS. It would start and run until the IPDM got hot. Then that same circuit you're testing would drop to 2.5 volts. And the engine would shut off and you had a no crank condition. The same happens to Chrysler, Ford and Nissan products.
@FlameDudeUmai
4 жыл бұрын
Thanks for the info and the wonderful videos.. Looking foward for more videos.. Learning alot from you.. Thanks from Mexicali Mexico Franco Perez. God bless you..
@labradormcgraw
4 жыл бұрын
(6:52) "...and the flow chart pretty-much sucked." It takes a seasoned professional to know all the correct terminology. So impressive.
@jonmic4232
4 жыл бұрын
Excellent diag as always. Thank you.
@labradormcgraw
4 жыл бұрын
Fantastic post-production editing. You don't see these extra touches anywhere else.
@nancylewis7142
4 жыл бұрын
thanks for all this information Paul.
@throttlebottle5906
4 жыл бұрын
scannerdanner, checkmark in box beside "not a hoarder" at least when it comes to video lol
@aymaneng6763
4 жыл бұрын
Good job danner
@rubengarcia6920
4 жыл бұрын
I seen 3 of those fuse boxes just do some crazy stuff
@luismarty1685
4 жыл бұрын
Great video as usual Paul.
@kasundoph.788
4 жыл бұрын
Nice vedio sir danner..thanks fo the tuturial.. from Philippines
@a.ghafoormalang3267
3 жыл бұрын
Thanks for the lesson lam learning from you master 👍
@JulioHernandez-rv6rp
4 жыл бұрын
Danner contigo aprendo diagnóstico más inglés 😂
@odishoodisho4904
4 жыл бұрын
Great as always thanks for sharing your knowledge
@shaungreen8713
4 жыл бұрын
Very nice! Thank you! From Illinois. 👍👍👍
@Joeelectronicschematicsforauto
4 жыл бұрын
whenever I hear a customer took out the fuses and put them back I always panic because they might put them in the wrong place that's why I try to match everything up with the fuse cover make sure
@michaelsmdk
4 жыл бұрын
Very good video! Helped me a lot! thank you!
@amr-50
4 жыл бұрын
Thanks danner great video as usual
@marshmellow1323
4 жыл бұрын
Awesome work danner 👍
@HypeTv100
2 жыл бұрын
2016 malibu lt 1.5 have both these codes does a new fuse box need programing
@BLACKSSG85
4 жыл бұрын
Alldata now has these diagrams FYI Paul.
@ralphdanysh7760
2 жыл бұрын
Could you explain how to separate the Delphi pa66-gf14 fuse box for 08 Impala 3.9 v6. Studs have been removed and all fuses and relays. The box seems to be held together by six tabs which I can't get to release.
@fascistpedant758
4 жыл бұрын
I've seen the Mitchell and Alldata DIY service and they didn't allow access to much of the service info. Maybe they've changed recently. Thanks.
@rahrah8076
4 жыл бұрын
Just buy the Mitchell on demand or all data and you will have full access and it comes on CD disk or external hard drive off eBay..not sure if it’s legal or not..lol
@rahrah8076
4 жыл бұрын
I’ve seen the full software on dhgate or aliexpress and you can buy it..
@ScannerDanner
4 жыл бұрын
It is not, that is pirated material and is HUGELY frowned upon by me, as I too am a seller of digital content.
@rahrah8076
4 жыл бұрын
ScannerDanner I new it was pirated software..I thought it was odd when I was looking at them on those websites..I haven’t bought any I use the Chilton library for all my wiring diagrams and information..
@holliday4580
2 жыл бұрын
i just had my 13 impala no crank right after turning it off. after trying multiple times i cycled the key a couple times and it started right up. could that be a bad relay or ignition switch problem?
@neverstoplearning382
4 жыл бұрын
Thanks for sharing master Danner. Regards.
@tubeyou0925
4 жыл бұрын
24:06 That guy in the background is absolutely captivated lol Let him know about Scannerdanner Premium XD
@roadkill5333
4 жыл бұрын
Oh, Mr Paul Danner!! How can I gingerly point out the error of your ways, without enduring the “Wrath of Caleb”?? 😉 You are the one and only, mighty teacher to the dumb and dumber, and worse!! (I am one of the worse.How y’all doin?) At one point you ask, ON CAMERA, “what this, ign vol”!! Sir, if the mighty Mr MANLY SCANNLYDANNLY, don’t know, and don’t tell us, we are all doomed!! There is no hopie hopie, for us dopie dopies!! ENQUIRING MINDS WANT TO KNOW!! Other than this, one tiny flaw, I’d rate this vid a 11.5 out of 10!! The editing portion was ok, Caleb ain’t all that, and a bag of chips, yet!! YET!!! He’s getting there, tho!! Lol thanks Caleb.
@iankelly2110
4 жыл бұрын
nice diag paul
@DanWallis86
4 жыл бұрын
Great work mate.
@Mikes_Repair
4 жыл бұрын
Great job guy's!
@kasundoph.788
4 жыл бұрын
I really like troubleshooting especially this kind of troubleshooting but i dont have any diagram and scanner..i am hoping soon
@shenalally2214
2 жыл бұрын
I replaced my battery when my 2010 wouldnt start. Key woukdnt turn OFF without a jump or a new battery. Now I have engine light ON with code C0899-00.
@user-nt8el9rf7s
9 ай бұрын
Hello i have that same problem drove the car and it cut right off on me and i have a evap code now aswell
@anthonywright9593
4 жыл бұрын
Ha there I was wondering if you know the relay stester tool model number you've used on the Lincoln Town car that didn't have power to the fuel pump? I'm doing some similar work on a 2002 BMW 530i
@ScannerDanner
4 жыл бұрын
It is called a uActivate tool and it is only sold by my friends at AESwave.com They are on back order right now, but email them, mention my name, and they will put you on a list carlos@aeswave.com
@anthonywright9593
4 жыл бұрын
@@ScannerDanner thank you Mr. D
@whitetiger8652
4 жыл бұрын
Thanks Paul!
@gregfaint504
4 жыл бұрын
Hey mate, can u shed some light on where u access your wiring diagrams please? I’m an auto sparky in Aus, and always struggle with finding wiring diagrams for vehicles. Cheers mate. Awesome vids!
@ScannerDanner
4 жыл бұрын
eautorepair.adtrk.biz/?a=10817&c=24&p=r&s1=
@robertbruneau112
Жыл бұрын
So which code was triggered by that secondary relay loose pin? 1682 or 689? thanks
@ScannerDanner
Жыл бұрын
Both? I don't remember
@JD-iu3vi
4 жыл бұрын
Curious if it was pin fitment on the relay pins or a bad solder joint on the relay socket on the PCB.
@ScannerDanner
4 жыл бұрын
Without taking the box apart, I can not answer that. Remember, other circuits were affected too (wipers intermittently not working)
@jarvispryor279
2 жыл бұрын
I have an 08 impala 3.5, Could this cost a misfire on all cylinder? I have codes for a p0689 and p0300
@ScannerDanner
2 жыл бұрын
Let's move this to my forum www.scannerdanner.com It is free to join and we can definitely help you. I have 28k global members and hand picked moderators who've been with me for years and know my material inside and out and are there to help me help you guys. It is just too difficult to offer back and forth messages here on KZitem with stuff like this and we also can't share pictures and images here like we can on the website. Hope to see you there!
@markferraro5250
4 жыл бұрын
Hey SD great video have those fuse boxes been an achilles heel for GM it seems like its been
@ScannerDanner
4 жыл бұрын
Yes they are
@throttlebottle5906
4 жыл бұрын
but what if both relays were failing, assuming the one that was swapped is good could be a mistake also ;) don't ask how I know! done it before lol. maybe even all of them in that box from same lot/line
@fp8007
4 жыл бұрын
👍 Nice video Paul ⭐⭐⭐⭐⭐ stars my friend 🤓
@Johnkb2059
4 жыл бұрын
I would just put some Thin copper strands of wire around the terminals of the relay and plug it in
@Discretesignals
4 жыл бұрын
I wouldn't do that on a customer's car. What's to say it doesn't come back for some other fuse block related issue. If it's your own vehicle, have at it.
@PhillyDee215
4 жыл бұрын
Cool video!!!
@andrewcimochowski
4 жыл бұрын
Is that a common failure in GM cars?
@ScannerDanner
4 жыл бұрын
I've seen it two or three times now on these boxes
@georgewesly6513
4 жыл бұрын
Interesting
@jesselyons2002
4 жыл бұрын
Just wondering. So 12 volts before on pin 86 and then 0 volts on pin 85. Is there a voltage drop because the coil is a load ? just wondering. Also $180 a month for mitchell. Are you paying for this or the school ? Just wondering
@ScannerDanner
4 жыл бұрын
yes, the coil is the load, great question
@Durkhead
3 жыл бұрын
Can I upgrade this box to a better one I'm having pretty mush same probs I want to add stereo amp but I'm afraid cause of this
@ScannerDanner
3 жыл бұрын
adding a stereo won't affect this as long as it isn't a high powered head unit. If it is, you will want to run your own power supply directly to the battery anyway.
@Durkhead
2 жыл бұрын
I gotta replace this box now it's full off corrosion now, it still starts it just takes a min then the light comes on and then u can start it if you jiggle the box it's will start faster
@alfredemerson1139
4 жыл бұрын
I have seen this also coming up on my ram2500, where the fuse box is not sealed for moisture
@bigguy8586
4 жыл бұрын
Scanner dinner, the troubles with my 2004 cayenne s just got worse. I left the moonroof open during big rsindtorm. When I tried to start it the next day, it started but with tons of lights . Troubleshooting has led me to the passenger side fuse panel on dash. Half of it has no power. What would cause half the panel to have no power? Aren't fuse panels powered by one main line?
@ScannerDanner
4 жыл бұрын
sounds like you have a module on the CAN network that crashed the network. I would focus on the modules on the floor area. You can have a BCM or another module that powers up a main relay that would then power those fuses that are dead
@ScannerDanner
4 жыл бұрын
In fact, the starting point for you would be to find out what powers those fuses, then back track your problem from there. It will lead you to the problem for everything in my opinion.
@bigguy8586
4 жыл бұрын
@@ScannerDanner thanks for replying. That's what I'm thinking is that there is a relay that must be powered via module that Powers up the fuse panel. So if I check schematic and find that relay, I could pull it and switch it to check for relay itself if no function check module power and ground, continuity of the line in between module and relay. If that shows good then look at why module not controlling relay. How would I do that without a spare module?
@bigguy8586
4 жыл бұрын
@@ScannerDanner does that link to the diy website show pin # for modules and where they individually go?
@ScannerDanner
4 жыл бұрын
@@bigguy8586 visual inspection first, find the module filled with water :-) Any luck?
@brishondrake6142
4 жыл бұрын
Wow, that is the first time I've seen you use a ratchet lol
@emmanueldoomson3849
4 жыл бұрын
I am one of your student I'm in auto I'll be watching you about 6 months ago I love the job but I don't have tools to work with please if you can help
@ScannerDanner
4 жыл бұрын
email me at support@scannerdanner.com
@dominicdo
3 жыл бұрын
don't you hated it when people smoke in the shop? bothers me just as much as when they run the car without a exhaust hose.
@mdjahidjahidansari6255
4 жыл бұрын
Sir how do you find any car wiring diagram plz tell me this about site sir I hope you replay my comments and I am from india
@ScannerDanner
4 жыл бұрын
I posted the link in the description and pinned it in the comments. Not sure these sites will help you in India
@billyr9840
4 жыл бұрын
Nice !
@tnamen1307
4 жыл бұрын
Sir, your videos are very very informative and useful for me. Thanks a lot. Meanwhile, my car Hyundai i20 1.2 has SDVC function in the Audio head unit. It controls the volume of the audio playback bead on the car speed. Now, how do I locate this particular wire going to the head unit and read it's signal?? I'm really interested to trace out this wire where it's coming from and going into!!! Please make video relavant to this SDVC wire of any car. Thanks in advance.
@ScannerDanner
4 жыл бұрын
There is no specific signal wire. Your radio is a module on a communication network that shares all kind of information, one being the speed the car is being driven for the speed sensitive volume adjustment. You should be able to simply turn that mode off within your radio
@tnamen1307
4 жыл бұрын
@@ScannerDanner but in the Audio head unit diagram, one pin or wire is designated as SPEED.
@tnamen1307
4 жыл бұрын
@@ScannerDanner since the car has SDVC function which can be enabled or disabled as per user option, the idea came that there must be a signal wire coming from the vss and going to the head unit, and subsequently used for controlling the SDVC function. Please help find locate such wires. Thanks.
@ScannerDanner
4 жыл бұрын
@@tnamen1307 where does the other end if that wire go? If it goes to another module, it is a communication wire
@tnamen1307
4 жыл бұрын
@@ScannerDanner other end not shown. Bdw, will back probe to this particular wire at the head unit side with car moving with multimeter gives a signal to confirm that it is the correct wire??
Пікірлер: 199