DIYWILLY P219A Original Video that really helped me kzitem.info/news/bejne/wo19nn2CpZxonoo
@DIYWilly
Жыл бұрын
Glad you got it all figured out! Thanks for the shout out. I really appreciate it.
@TurnThemWheels
Жыл бұрын
Dude you don’t know how bad I had struggled with this code lol. Forums didn’t help, Facebook groups didn’t help. Didn’t want to pay a mechanic when I only had a basic scan tool , BlueDriver. Got the XTool D8 and did the injector balance test and confirmed. I searched and searched for the P219A and finally had found your video brother. I am beyond grateful for you posting this originally !!
@DIYWilly
Жыл бұрын
@@TurnThemWheels That’s what we’re here for to help others out with problems and hopefully find a solution.
@TurnThemWheels
Жыл бұрын
@@DIYWilly yessir I appreciate you
@losexotic4371
Жыл бұрын
Had a misfire in cylinder 2 code p302 changed cylinder 2 spark plug and ignition coil but was still there so then I changed fuel injectors the code went away for a day but now I have a p219a code
@TurnThemWheels
Жыл бұрын
Bank 1 O2 Sensor, Bank 1 Fuel Injector, Spark Plug wire. What brand did you use for parts
@westernsoutherner1
2 ай бұрын
My 2010 Silverado 5.3 had a 219a code that was intermittent along with a p3400 (cylinder deactivation) code. Cant seem to figure it out either. New O2 sensor, cleaned MAF, 2 month old plugs/wires, good air filter and Im pretty crazy about my oil changes for lifter preservation reasons. Mine seems to come on after long drives at high speeds, under load pulling a trailer, or going over a big mountain pass- so basically when the engine is running hard. Been running Techron to last 2 tank fulls to try and clean up injectors, but honestly I run it periodically already. I hope its not a lifter issue thats a total bummer of a job. My Dad was a tech for many years and consulted another friend who is a tech- they are both saying replace all the injectors-ugh.
@westernsoutherner1
2 ай бұрын
Thanks for highlighting the comment. A few more details to hopefully be helpful- Truck has 242,700 miles. The P3400 code cleared yesterday and then I drove it 100 miles and P219a came back this morning. Yesterday I also did smoke test in the tailpipe, gas tank, and a vacuum hose going into the intake - did not detect a leak. I also took apart the airbox, breather hose, unhooked/reconnected several vacuum hoses, brake booster line, and evap line from gas tank (evap purge functioning correctly). More Techron this morning in an effort to potentially clean dirty injectors. No misfire codes.
@jakebliedung1471
Жыл бұрын
You the man!
@TurnThemWheels
Жыл бұрын
Thanks bud, hope you can subscribe and share the video with others
@andresdiaz8215
10 ай бұрын
Hey boss i get the same 219a code but it comes off I was wondering if I could just clean the same injectors I have or should I replace them
@TurnThemWheels
10 ай бұрын
Replace driver side ones or all of them. Check O2 sensors and other things
@kylehardy8003
6 ай бұрын
I have the same code, replaced all the injectors, replaced map sensor, replaced mass air flow sensor, all o2 sensors also replaced. No misfire, code came back. Any ideas?
@TurnThemWheels
6 ай бұрын
Code came back for me too. Already replaced denso upstream sensors, all injectors. No misfires at all, live data looks fine and Fuel Trims look good. I’m stumped, I’m thinking afm / lifter. 😔
@Chris_1129
4 ай бұрын
Any luck with getting rid of that code?
@TurnThemWheels
4 ай бұрын
Came back
@antoniolang2035
Жыл бұрын
I changed the spark plug the ignition Coil and the wiring and poured fuel injector still has a rough idle. It’s still misfiring from cylinder 4 and the engine light is still on. I don’t know what to do next. It’s a GMC Sierra 2013 Truck
@TurnThemWheels
Жыл бұрын
What’s the code?
@TurnThemWheels
Жыл бұрын
What is the code you are experiencing sir?
@jonathangarib7100
7 ай бұрын
Hi all have the same code on a 2013 Tahoe. That is the only code i have and the truck drives fine no misfire. Any idea what direction I should take?
@TurnThemWheels
7 ай бұрын
Possibly lifter. What symptoms do you have
@jonathangarib7100
7 ай бұрын
No noticable symptoms. But the check engine light keeps coming back even after I clear it
@TurnThemWheels
7 ай бұрын
@@jonathangarib7100 gotcha
@TurnThemWheels
7 ай бұрын
@@jonathangarib7100 I use the range module and it’s started to pop after driving with it off
@hustlinghard8081
Жыл бұрын
How did you determine which injector it was?
@TurnThemWheels
Жыл бұрын
Hi, thanks for watching I did the test and it sounded weaker than the others and was leaking
@robsmith7108
Жыл бұрын
How was the truck running before you fixed it?? Bc I think I have the same problem going on with my truck.
@TurnThemWheels
Жыл бұрын
It had a misfire, do you have codes
@robsmith7108
Жыл бұрын
@@TurnThemWheels okay, but no codes or lights on the dash!! When I get going from a stop it’ll hesitate a lil bit and backfire. It’s dod deleted too. I took it back to the guy that redone the motor, he said the #7 injector was loose. And he told me to run 87 with Lucas injector cleaner. So I did and it ran fine for about a week and it started back again.
@TurnThemWheels
Жыл бұрын
@@robsmith7108 my number 7 was leaking
@jweiss1281
8 ай бұрын
I have the same code but no misfires
@TurnThemWheels
8 ай бұрын
Same
@TurnThemWheels
8 ай бұрын
Do you have a GM truck? What have you changed? Any symptoms ?
@jweiss1281
8 ай бұрын
@@TurnThemWheels yes 2013 suburban, haven't changed anything yet, just don't want to throw parts at it
@TurnThemWheels
8 ай бұрын
@@jweiss1281 the bank, one injectors, fixed it for a while. However, I have been running the range AFM disabler recently and currently the code only pops when it has been unplugged and driven for some miles
@jweiss1281
8 ай бұрын
@@TurnThemWheels no misfires, every once and a while at idle it will hiccup ever so lightly. And know this is gonna sound really weird, but when it throws the code I get a weird smell, almost like rotten egg smell, I can clear the code and it goes away
Пікірлер: 48