That's exactly what we did with my son on my 2014 srt 392 charger ,but mine didn't had the fan resistor, can't get it online I didn't removed the headlights, just remove the bottom bracket where the radiator sits, and removed it from the bottom lifted the car with a floor jack
@Ken-1
2 ай бұрын
Just did this. There's absolutely no need to take the bumper or headlights out if you don't want. Just remove the lower splash shield and all necessary bolts can be reached. Loosening the lower radiator support (four 13mm bolts) helped too, but don't think it was necessary
@Davethemechanic305
2 ай бұрын
@@Ken-1 would love to see that video. You'd be the first on KZitem. Go for it
@PrinceandTasha
8 ай бұрын
💪
@beedub5155
4 ай бұрын
Why did you remove the headlights and loosen the radiator support? I got my radiator out and back in with out all that. I did have to remove the bumper cover, though.
@Steavethefish3
3 ай бұрын
“the new fan didn’t come with wires” why is that even a thing, how hard is it for companies to include the full assembly 😂😂😂
@Davethemechanic305
3 ай бұрын
Cheap I guess. Lol
@rajbirsingh439
10 күн бұрын
Good job❤
@Davethemechanic305
9 күн бұрын
Thank you
@nellanono2
6 ай бұрын
This video needs to have more views and likes. It saved my day. It took a few more minutes but made the work so much easier.
@Davethemechanic305
6 ай бұрын
KZitem takes it's time lol. It'll get there by next year
@Davethemechanic305
6 ай бұрын
Thanks for the feedback
@Yardsalesandfleamarkets
8 ай бұрын
Nice car
@MrHollywood7645
5 ай бұрын
Can you install a new lower radiator hose without taking off the bumper?
@Davethemechanic305
5 ай бұрын
Yes
@FastLane_osama
5 ай бұрын
What does 347 mean ?
@Davethemechanic305
5 ай бұрын
From my understanding a slight modification of the 345 to get more horsepower
@FullyPaid_Aj
6 ай бұрын
Replaced my radiator and coolant is still leaking Already have a new hose New radiator What next?
@Davethemechanic305
6 ай бұрын
It depends on where it's leaking from. Is it coming from the engine area, a hose clamp fail? Water pump, thermostat housing? You should find the leak before replacing parts
@FullyPaid_Aj
6 ай бұрын
@@Davethemechanic305 its seem like its coming from engine Or thermostat housing
@Davethemechanic305
6 ай бұрын
@@FullyPaid_Aj if it's in the back it might be heater hose or connections, if in front with the pulleys it's most likey water pump leak or hose connection. Of course check all hose connections leading to the engine. The thermostat should be the easiest to rule out as all you have to do is follow your upper radiator hose to where it connects to the engine and check for a leak. Some cars might be a lower radiator hose. They are nowhere near each other so it should be easy to isolate the water pump leak from a thermostat leak
@FullyPaid_Aj
6 ай бұрын
@@Davethemechanic305 ok then i do think its the water pump It came right there from where the pulleys are at But it seem as it was smoking from the radiator too
@Davethemechanic305
6 ай бұрын
@@FullyPaid_Aj could have been multiple leaks. Theses models have a propensity to leak from the radiator hose connection. But check the hose connections around your water pump before Changing the actual pump
Пікірлер: 31