Need longer more descriptive videos on KZitem if you want success... I'm wanting to change my 2014 edge booster and I didn't get much info on it
@Poor-old-Podunk-plow-boy
Жыл бұрын
Someone told me they are under warranty Recall might want to check your dealer
@danjanes8689
4 ай бұрын
Thank you making this video. It gave me what I needed to change the booster on my 2013. Tip: The first thing I did was cut a wooden dowel rod to prop up the hood on the passenger side so that I didn't have the factory installed prop rod right in the way on the driver side. That's was pretty helpful.
@RonaldGreen-uj8xd
Ай бұрын
I just changed one tonight 9/2/24 u don’t have to pull ll that off
@Poor-old-Podunk-plow-boy
Ай бұрын
You must have pulled the top of the intake or the throttle body off. That's the only other way it will come out through there. We decided to cause a body man. It's easier to take the cowing apart. Then it is to take the throttle body and wiring apart on the intake. So to each is their own, however you want to do it. This is the quickest easiest way in my personal opinion.
@s99614
29 күн бұрын
So, the only reason you removed the cowl piece was to move the master cylinder aside.
@Poor-old-Podunk-plow-boy
28 күн бұрын
I remove the cow to get the booster in and out!! You can not get the booster in and out unless you remove the throttle body and some wiring. Are the cow!!!! . Some say the top of the intake has to come off and .on, this was the easiest and quickest way to do it that we have found. Didn't have to buy any gaskets or special tools.
Пікірлер: 7