You help me so much. Thank you. Plus, you safe me a few hundred dollars. Keep up the good work
@DantheFixitMan
6 ай бұрын
Thank you so much! So happy to hear you saved some money! Take care, -Dan
@RosiiitaFresiiita
Жыл бұрын
Great video, easy to follow- Thanks !
@MrMessina-lh9gr
Жыл бұрын
Great in depth video!
@elmayimbe_the_amateur_mechanic
7 ай бұрын
You don't have to push the pistons back with a c clamp?
@xinbox2
2 жыл бұрын
Very nicely done! Thank you 😂
@ismaelrodriguez1337
11 ай бұрын
Clean job
@jekutube9
Жыл бұрын
my front caliper pins are always frozen stiff (can't knock them out! corroded) - and have to take a reciprocating saw to get them off
@Jaiwilldo
2 ай бұрын
Rotor size 320mm or 345mm?
@jimsego172
Жыл бұрын
Thanks for the great video. I am getting my Macan ready for inspection and took a look today. I'm going to need help with the 21 mm bolts. Did you use the jackstand to level up the control arm to make it easier to get the impact gun in place?
@lukes6335
8 ай бұрын
I did this and now have a electronic parking brake malfunction light, do you have a solution for this?
@ADProduces
2 жыл бұрын
Great vid. Is it the same for the passenger side? Is it the same for the different trims Q5 3.0 and SQ5?
@Omnibeamer
Жыл бұрын
Yes it same on passenger side and same for different rims
@Arty-ev8oy
Жыл бұрын
Do you have a video with the same make and model car for the rear brakes?
@DantheFixitMan
Жыл бұрын
kzitem.info/news/bejne/s4V6n2hjrpiYZaQ This is for the rear brake pads on the same car.
@Kushj23
2 жыл бұрын
Hey it’s my first time doing my pads and rotors but it seems that the two 21 mm bolt for the calliper won’t budge. I’ve been stuck on them for 2 hours. Any tips on how to remove it?
@babyballa991
2 жыл бұрын
Bigger impact and maybe use a heat induction tool to get ghe bolt warm to give u rhe best chance
@keijokortti5229
Жыл бұрын
More power
@BMH1965
9 ай бұрын
I dare you to show you fixing the rears properly...
@DantheFixitMan
9 ай бұрын
This is what I did, may not be the proper way, because it’s the pads only, and I didn’t have the scan tool for retracting the parking brake the proper way, but it might help? kzitem.info/news/bejne/s4V6n2hjrpiYZaQsi=gGAtChUxDnC2ebST
Пікірлер: 22