Do you guys have a video on how to wire the plug into the OEM slot?
@jugrnot8
3 жыл бұрын
Black to black Green to white Both reds to blue
@TheCoolMexicanGuy
2 жыл бұрын
@@jugrnot8 thank you!!!! 🙌🏼
@Mdrnsamurai
2 жыл бұрын
Just got mine today!!! Can't wait to install them... Thanks for the great video guys!!!
@CaliRaisedLED
2 жыл бұрын
Hope you enjoy the product!
@jackfrye456
Жыл бұрын
Just bought this and the OEM switch for my 2022 Limited!
@71tattooguy
2 жыл бұрын
Just got mine thanks for the great products. Install tomorrow 🤘🏻
@CaliRaisedLED
2 жыл бұрын
Right on! Shoot us photo when you get it all rigged up!
@kennlifts
2 жыл бұрын
Gonna definitely buy these for my 2019 TRD sport
@CaliRaisedLED
2 жыл бұрын
They are so awesome! Let us know if you have any other questions feel free to contact us. info@caliraisedled.com (888)-385-5036
@johnd.9203
3 жыл бұрын
Not detailed enough. Which screws and bolt to install the bracket to the pod?? I have a bunch of hardwares but which goes in first? Washer? Nuts? ???
@HugDeeznueces
5 жыл бұрын
just bought this kit bc of this video!
@mauricionieves4506
4 жыл бұрын
good friends, I have a question. where is the relay connected? is for a Tacoma
@marissaaquino686
5 жыл бұрын
did you guys need to poke a hole in the fire wall, i don't see any hole in it
@Celltech07
6 жыл бұрын
I agree with @Daniel Hannah . Need a video on how to re wire from your button switch to the aftermarket switch you guys sell. Just picked up my lights and new switch and don't know anything about wiring so a little confused and cant find any other videos that cover it.
@vikdani
5 жыл бұрын
hey man did you figure out the wiring? I haven't recieved mine yet, so kind of want to have an idea. The OEM Switches they sell are usually 4 wires (red, red, black and green), but not sure about the switch that comes with ditch lights.
@philkwon81
5 жыл бұрын
Check out their video for the hidden front bumper light bar install. They go over it there. Looks really easy, so I just ordered all the OEM switches for my lighting setup.
@vikdani
5 жыл бұрын
Phil Kwon I did figure out; it was easier than I though:)
@leedew59
6 жыл бұрын
How do you wire to the optional OEM switch? The wire harness has 3 wires: blue, white and black. The OEM switch has a green, 2 red and a black. Need some instructions please.
@vikdani
5 жыл бұрын
Hey man did you figure it out? I am getting my package soon, so want to get ready. I did some wiring with OEM switch and auxbeam light bar and wired both reds (OEM Switch) to red (auxbeam), black to black and green(OEM Switch) to yellow (auxbeam). But here I have no idea. Thanks!
@chuchotacomas5476
5 жыл бұрын
Same question here, did you find out how to wire?
@chadweddle9191
4 жыл бұрын
Any tips on how to get one of the bolts off? My passenger side back bolt is super tight. I’ve tried lifting the hood, different length sockets, wd-40, I don’t know what else to do. Appreciate the help.
@aidanmahoney3985
5 жыл бұрын
I didn't know that soldering was needed to combine the OEM switch wiring to the harness. I don't understand why it's sold partly built? This is silly. It should have came with OEM switch wired to the harness.
@johnp3224
4 жыл бұрын
You can just use wire connectors
@Redacted796
5 жыл бұрын
so what if i wasnt paying attention and installed the bracket in between the hood and where the hood connects
@joecool509
5 жыл бұрын
Brandon it will affect the gap between the fender and hood but does hug the hood a little better and gets the light a bit higher.
@dampainter1
3 жыл бұрын
i just got these......what r the washer orientation ? edit...... where does the flat washer go for the four side bolts? i know they don`t fit where the nuts/lock washers are, where does flat washers go? between the housing of light and bracket? that does not seem possible so am cornfused at the moment where they go.
@Emperor36
4 жыл бұрын
My bolts on my 2015 Tacoma doesn't want to unbolt I have tried and I'm afraid that the bolts are gonna strip 😭
@CaliRaisedLED
4 жыл бұрын
Might take it to a professional! Good luck.
@Emperor36
4 жыл бұрын
@@CaliRaisedLED Yes I will at my friend's shop. Thanks you can't wait to put them on.
@chadweddle9191
4 жыл бұрын
Did you ever get your bolts off. I have one that will not come off for the life of me. Any tips?
@Emperor36
4 жыл бұрын
@@chadweddle9191 I never got around to try and getting them off, I've been so busy with work it's nuts but yeah it's locked on there good probably have to take it to a pro
@9oo9o
6 жыл бұрын
Where can I get a set of bracket for my Tacoma and how much thank you so much great video 👍
@austin5657
Жыл бұрын
So just got this kit, installed it and and functions fine but the on/off switch that comes stock stays “on” with the green light even when off. It also does not appear to turn off with the truck off. Concerned about battery dying due to that. Any ideas ? Currently just have it wired directly to the positive and the negative on the battery, should I ground it elsewhere ?
@CaliRaisedLED
Жыл бұрын
Please cotnact our customer service (888)-385-5036 or info@caliraisedled.com
@ComicalPlum3
5 жыл бұрын
This video is for the 2016 and up. I have a 2015. Is the installation pretty much the same if I order the ones for my 2015 truck?
@CaliRaisedLED
5 жыл бұрын
Yes the brackets are almost identical.
@ryanmoritz312
3 жыл бұрын
On the 2020 Tacoma Off Road, there is no room to take one bolt off at a time under the hood for the bracket. Anyone else experience that? Other than that, great video, I appreciate the help!
@itskerbc
2 жыл бұрын
Just bought a bracket and installed it today. One thing I noticed is the driver side bracket is higher than the passenger side. Is that how it’s supposed to be?
@CaliRaisedLED
2 жыл бұрын
Please send out customer service pictures of you can send them to info@caliraisedled.com
@alexmlo1
5 жыл бұрын
The 2 bolts that u are supposed to take off to install the brackets are pretty solid in there place. Any advice to help get them twistin?
@Russxm
5 жыл бұрын
PB blaster and a longer ratchet
@logant8262
5 жыл бұрын
Does the switch sent with the pods, not the OEM have a continuous draw on the battery since the off light is always illuminated? Is that something I should be concerned with? I will be installing the oem switch in a week or two, but until then they will be plugged up to the switch sent with the pods.
@basinvisual
5 жыл бұрын
Ever figure this out? Mines always on also.
@bennyh384
5 жыл бұрын
For switch light, you need to use add-a-circuit with one of two red/yellow(one that is next to black wire) wire and tap it into one of many ignition power source in the fuse box. There are two options depends on how you want it to function. Option#1: Use Tail light fuse slot if you want the switch light to be on only when parking lights are on. The switch light will be turned off during daytime drive without parking lights on. Option#2: Use IGN2 fuse slot if you want the switch light to be on all the time as long as start button is pressed/key is turned. I use this option as blue switch light looks cool even during daytime. And of course ditch light turns on anytime regardless of switch light. You don't have to use same exact fuse slots I mentioned as there are many more to tap into. I've been running five add-a-circuit in the fuse box for years without any problem.
@TFrax
4 жыл бұрын
Is there a way to wire it to a fuse instead of the battery?
@Lkom24
Жыл бұрын
Addafuse
@scotquigley513
4 жыл бұрын
Do you have brackets for a 2000 Chevy S10?
@jonb1236
5 жыл бұрын
I have 05 Tacoma . Is the install in this video pretty much the same for an 05? Thanks
@CaliRaisedLED
5 жыл бұрын
Yes it is the same.
@tarek3702
4 жыл бұрын
Are the brackets mount universal?
@CaliRaisedLED
4 жыл бұрын
Tarek Taher they can hold any brand led light.
@ItsAndrewL
6 жыл бұрын
Can you install both the ditch lights and your 32in light bar on stock taco battery?
@ItsAndrewL
6 жыл бұрын
Maxx Powell Hey thanks Maxx!
@andrewgoodwin310
6 жыл бұрын
Are the pods adjustable?? Swivel up/down or left/right ?!
@joecool509
5 жыл бұрын
Andrew Goodwin the left to right is done by the mounting bolt for the light it self. Up and down is usually done by an included mount with the LED.
@klxklr
6 жыл бұрын
Low profile as in shorter and close to the hood? How much closer than the older ones?
@CaliRaisedLED
6 жыл бұрын
Yes they are roughly 1-3/4" Lower
@rcconnection4421
6 жыл бұрын
Low profile also means more glare from hood
@chava93249
6 жыл бұрын
Do you guys carry them.. for the 5th gen 4runners ?? I want some..
@CaliRaisedLED
6 жыл бұрын
Yes we do. please visit our website.
@chava93249
6 жыл бұрын
Sorry the 4th gen 4runner
@Radiography14
4 жыл бұрын
Website or link to buy these lights please. I have a second gen 2013 Tacoma.
@alexv4046
2 жыл бұрын
This video skips the light install on the bracket wich is like 50 percent of the install .....
@CaliRaisedLED
2 жыл бұрын
Hey Alex, We skipped this part because its only one bolt and nut that holds the bracket to the pod. If you would need help with this part of the installation, please feel free to reach out to our customer service!
@ehretwins
8 ай бұрын
How about the light with the bracket assembly. Shitty tutorial
@CaliRaisedLED
7 ай бұрын
Please email info@caliraisedled.com and we can help out :)
@mrdealio
2 жыл бұрын
A kit without an OEM Switch!!?? That's not cool!
@CaliRaisedLED
2 жыл бұрын
Hello, When you click the product you have the option to customize the kit! Customizing the kit comes with several different options. You can check it out for yourself below by clicking the link! caliraisedled.com/products/2016-2021-toyota-tacoma-ditch-light-brackets-kit
@TheNivragni
5 жыл бұрын
Useless without the wiring videos. Gonna buy somewhere else
Пікірлер: 70