It comes off counter clockwise in the 2014-2018 4th gen Cummins correct? Youre a life saver. Great tip !
@austinfradette5514
2 жыл бұрын
Just saved my Sunday afternoon!! Thanks brotha!
@ML-mq7zq
3 жыл бұрын
You saved me today! My fan clutch pulley screws shredded apart on my 2014. This saved me from burning the truck where it sat! Haha. Thanks
@danielbaldwin1397
Жыл бұрын
Thank you I bought a tool for over a 100.00 bucks it didn’t work but your method did ❤
@thecumminscamper
2 жыл бұрын
Thanks for the tip of using the ratchet strap on the pulley. Saved my day
@NoblesTx
4 ай бұрын
The strap worked for me, thank you!
@onegoodmason
Жыл бұрын
Thanks man . That fan worked great . I couldn't get a good swing with my hammer on the wrench which usually works . The strap and a snipe was all it took . Cheers !! 🍺🍺 Total time , just under 1 hour to swap in my case .
@dandmitriev2682
4 жыл бұрын
Very nice way of getting it done
@bbw7037
Жыл бұрын
Just ordered Murphy fan clutch from OReilly. They had 20 % off. Genos is backordered till end of Feb. Been driving with messed clutch for a while, short local trips, minimum idle. Fan is turning slowly, no roar. Can stop it with my hand.Thank God no accident slowdowns on highway. Temp would be insane.
@keithfrank1303
Жыл бұрын
Awesume possibly it will work on my 5.7 when I do a fan delete and go with the electric fan .
@jimwest4516
Жыл бұрын
Thank you, you tips saved my a_s haha mission accomplished fan clutch replaced, yay.
@rawbdiggity
2 жыл бұрын
Ty perfect
@dustyweasel41
Жыл бұрын
One thing I’ll add to this (very)helpful video is to take one of those Sheetrock sponges and cram it between the ongoing clutch fan assembly and the radiator. It’s soft and will give you just enough push on it to thread it. I hope this saves you from the frustration/anger I was reaching...
@robertonunez5917
10 ай бұрын
2 wa 29
@dustyweasel41
10 ай бұрын
@@robertonunez5917 sorry, what does that mean?
@neumanspressurewashing876
4 жыл бұрын
You saved me! I was giving up after renting the fan clutch tool at Autozone and not getting anywhere with it then I watched your video with the ratchet strap trick and give it a try and boom came loose!! Also had no clue the fan shroud could fit past the fan! Thanks for the video
@gogogo1064
4 жыл бұрын
👍👍👍👍👍👍👍👍👍 Great video
@robertharris5159
2 жыл бұрын
Quick question do anyone know what color wire from the clutch pigtail goes to which color on the engine side? My belt broke and ripped the clutch male pigtail end so I’m trying to splice my wires 2015 6.7 I have 5 wires on both the clutch and engine side
@randyrussell9755
2 жыл бұрын
Cresent wrench
@slee1200
3 жыл бұрын
How did you know your fan clutch was going bad?
@vladvilkhovoy3191
3 жыл бұрын
It never stops spinning
@ScottDLR
3 жыл бұрын
Eventually it will throw a code. The computer monitors commanded and actual speed. This type of fan looses a little bit of its efficiency every year though so it can start letting temps slip before it totally fails. Another way to tell it's bad is if it doesn't roar in the morning (called morning sickness but it's a good thing). If you tow heavy, it's wise to swap it somewhere around 100K. And absolutely never use anything but OEM for your Cummins powered Ram truck (yes, their expensive).
@guramkerelashvili1302
3 жыл бұрын
My fan clutch is always on for some reason. I have 2015 ram 3500 6.7 cummins
@ScottDLR
3 жыл бұрын
It may be freewheeling but not actually "on". When it's fully engaged, it roars. A good one will roar allot when cold and you just take off.
Пікірлер: 24