Thank you so much for this video! I was able to do it in my driveway, 2hrs and 20 min! Thanks to all the details in this video.
@maxxonetwo3
10 ай бұрын
Excellent video. Dodge dealer wants $1025. to replace my fuel pump on my 2015 Dodge Ram 1500 with only 52,000 miles. They are telling me the pump cost $600 + 3 hrs. in labor. Thanks for this video it seems it took you 1hour 15mins. A new pump cost me less the $200. Rick Lake George, NY
@tjsmountaingarage1613
10 ай бұрын
Best of luck to you buddy, glad this video could help you out 👍🏼
@pogojp
8 ай бұрын
I enjoyed the video. I would say that when removing the ring, you should rotate which one you hit at each interval. Hitting one single location will work, it will also delaminate the edge of that hole you're hitting against unless using a soft tipped chisel which he did not attempt to use. Rotate the holes used to hit when removing the ring, it'll cause far less damage to the ring holes. It's not really an issue, just I prefer to do as little damage as possible during any repair.
@RobertYayo
6 ай бұрын
Thank you was able to do this with a jack, no to bad of a job 10/10 will do again
@ryaj2356
2 жыл бұрын
So, What you’re saying is all I need is a lift to do this job? I Wonder why it took me 3-4 hours to do this job by myself.
@ryaj2356
2 жыл бұрын
Still mad at you for doing this with a camera mostly one handed in just under 25 mins. I need a freakin lift 😅
@ganzosworld524
Жыл бұрын
Great video
@kevinschafer1987
Жыл бұрын
You would think they could come up with something better than all the plastic hose connectors. Breaking plastic crap.
@bohunter2182
4 ай бұрын
About to do mine
@rockywilson750
22 күн бұрын
Hmm. My 2019 1500 classic has a different looking fuel pump
@robertosilvestre8897
Жыл бұрын
👏👏
@ryaj2356
2 жыл бұрын
Just did this job on mine. No lift tho. Took 3-4 hours. A lift makes it less than an half hour? I need one😢 😅
@Coorsdrinker-w3e
2 ай бұрын
How did it take 3-4 hrs. I'm doing it without a lift ad well and I'm about 30 min into it and have all but 2 connections apart.
@ryaj2356
2 ай бұрын
@@Coorsdrinker-w3e you have a lift kit on your truck that makes your truck sit higher? I had to raise my truck up higher to be able to lower the tank so it could cleared the frame of my truck to pull it out and do all the replacements and put it all back then raise it off the jacks afterwards. I only had to go up a few inches and add a few jack stands but it took 30 mins to raise put in and remove four jacks.
@Coorsdrinker-w3e
2 ай бұрын
@@ryaj2356 Nope stock height
@ryaj2356
2 ай бұрын
@@Coorsdrinker-w3e I couldn’t get my tank out without pumping it up some to gain clearance access.
@Oldschoolrules123
Ай бұрын
I love people on KZitem that have you believing how they magically did a 4 hour job in a hour. I cut a hole over mine and did it in minutes without crawling on the ground and fighting to reach connections that you can't even see. I never cussed once and considering I now have a removable cover it will take me less time if it needs replacement again. And my tool box covers it up.
Пікірлер: 18