Nice Video.. That’s Good To Know I have to stock those Fusion proximity just Incase i get a call I was watching other videos and I think you need 2 smart keys in a all keys lost situation..
@garyjohnson801
4 жыл бұрын
What was the beginning of the way you used the xtool to get it to turn off the alarm. That's what you should have shown. And the Xtool 100 pro can do it then the autopropad can do it to . But was the first procedure did you do that's what I would like to know
@adamackels73
4 жыл бұрын
The way the system is designed is, you need to set the alarm off. After exactly 10 minutes. The horn chirps twice, the BCM is allowing 1 minute to begin communication. Then the rest is what you seen in my video. Now. I still own that tool, but I refuse to purchase updates. Why? XTool is a bunch of fucking idiots. They're so occupied with literally anything else, updates aren't that important to them.
@victorColone
2 жыл бұрын
Auto propad is the x100 It's just American key supply fooled so many of you to think it wasn't so that they can charge you $1500 extra for a $600 x100 pad 2
@ricardonavarro3498
2 жыл бұрын
Excato
@ricardonavarro3498
2 жыл бұрын
@@adamackels73 pero nunca respondiste cómo desactivar la alarma, eso sería lo más importante
@TheKeyMan12
Жыл бұрын
Been sitting in this 2016 ford fusion waiting for the 2 Chirps to deactivate the alarm & it been 20min & still nothing
@rgeller56
2 жыл бұрын
No is the xtool the one that will work for it because I've tried it all town and the T code just get there and does not do anything the horn will chirp twice hit okay does nothing but start over with another attempt
@ngjunshien206
4 жыл бұрын
Which vehicle did u choose for (2013-2017)
@safeshowroom
5 жыл бұрын
You had remotes in the cupholder and in the "hand box"... so which one was it that took?
@adamackels73
5 жыл бұрын
Ultimately, the car took both. The one in the cup holder was first, then switch remotes, and learn the 2nd remote.
@philh9238
Жыл бұрын
How do you get incodes for the fords that don’t use a 10 minute wait?
@adamackels73
Жыл бұрын
All the tools I own have them built in. That is up until around 2010-2011, and there isn't any codes. In this video, the software knows how to communicate with the car... But newer cars are even nastier. Two years ago, I spent many hours trying to make keys for a 2017 Ford F-150 - all lost keys, with active alarm. None of the tools would do it correctly. Finally, I found the code for the combination on the driver's side door, and deactivated the alarm then... Not 5 minutes later, I was done.
@philh9238
Жыл бұрын
How much is the tool your using in the video?
@segounlocks5029
Жыл бұрын
@adamackels73 all you gotta do is do what he did in video open door and wait for horn to honk you got 1 min to get into system. I can't confirm on 2020 but I can on 17 18
@ammreid
6 жыл бұрын
What was done right before this video started?? did the machine tell you to do something as far as the active alarm churp? did you just turn on hazards or did it ask you too? thanks
@adamackels73
6 жыл бұрын
ammreid nothing. I simply opened the door with the emergency key. Since the car was locked, the alarm became active. If you can't turn the alarm off using the door entry code, a programmed remote, or the keyed models then we rely on a programming tool to get into the system and program a key to silence the alarm. If a tool doesn't have software to program the key with an active alarm, then a person needs to pull the CJB (Central Junction Box) to get the 5- digit off the label to deactivate the alarm.
@ammreid
6 жыл бұрын
Adam A ... thanks!
@motochiptuning
5 жыл бұрын
@@adamackels73 so you toolmodule to take pin from it to deactivate alarm?
@adamackels73
5 жыл бұрын
@@motochiptuning The system is designed to, when the horn honks twice - a tool has 1 minute to begin programming keys. Once it has a valid key, the alarm can be deactivated. The one minute window it only a temporary thing.
@Shiivvz
4 жыл бұрын
@@adamackels73 How much should this cost to get done, I lost my only key so I ordered 2 replacements, got them cut by locksmith but he could not program them because of alarm. Please advise
@MYKEYSAUTOMOTIVE
5 жыл бұрын
X100 pad2 ?? Niceee
@MYKEYSAUTOMOTIVE
5 жыл бұрын
The autopropad is more updated for newer ford t keys..
@adamackels73
5 жыл бұрын
MY KEYS AUTOMOTIVE No, PS80 - Auto Pro Pad. Just another Chinese copy cat tool. XTool doesn’t innovate shit.
@ДмитрийЗарицкий-ь6о
3 жыл бұрын
Hi. Did you do this Xtool X100 Pro 1?
@adamackels73
3 жыл бұрын
No idea. My tool is a PS-80. They're not doing many updates
@redfoxx1417
2 жыл бұрын
I tried this with the propad lite and full version it wouldn't work kept getting security verification fail I guess the ps 80 is a better tool to have
@adamackels73
2 жыл бұрын
No. They're the same tool, and largely the same software. The only software that's different is, I have a KC100, you have a KC501 for pre-programmed key systems.
@redfoxx1417
2 жыл бұрын
@@adamackels73 well the double beep only worked a few times for Ford/lincoln no door code
Пікірлер: 32