Haha I love this guys vocabulary, it really lets me know what im about to get into. When i hear this i know what kind of a mess im getting into. Thanks bro 😅
@seanpoarch9344
6 сағат бұрын
Fulfilling the idiocy of my forefathers, I broke my Fresh Air PCV line whilst checking my spark plugs. was able to pop them all off at the end of the lines using two 90 degree picks simultaneously if that helps any of you.
@frankjones2521
Ай бұрын
Talk about reinventing the wheel. They really outdone themselves this time.
@darrenposey82
Ай бұрын
I just came across your video. I don't know what code you were getting, I recently had a client who's car was throwing a cod that was similar. I changed out the :" waste gate seloniod." It's a little square black box, with (3) smalle hoses, and a plug. If you follow the silver waste gate actuator, it sets on top of the turbo with a rod coming out the back, follow it down to the first hose...that will be the selonid. If it's clogged it won't blow air to open the actuator Hope this helps.
@emmcee476
3 ай бұрын
The throttle body didn't get damaged/set a code after all that oil buildup?
@vincenthicklin2245
3 ай бұрын
Are you saying I have to break the crankcases to fix this. Essentially I can’t just buy and replace the hoses?
@happyspookday
3 ай бұрын
you're probably going to break the plastic bits, crankcase should be aluminum and won't break easily
@andrewgarcia907
3 ай бұрын
What led you to replacing this ? I’m about to do this to my 2016 I have pretty bad bow-by I figured the parts aren’t that expensive I’ll just do it if that doesn’t fix I guess that means my piston rings are done for and I’ll just drive till it goes
@happyspookday
3 ай бұрын
Oil was ending up in the intake and because it is turboed the oil was being pressurized and pushed into the throttle body, causing the car to run poorly
@DanielGarcia-lo1cy
2 ай бұрын
Hey Andrew did changing the pcv go? I also have blow-by from dip stick and oil cap. I feel should do a leak down test or change the valve cover.
@andrewgarcia907
2 ай бұрын
@@DanielGarcia-lo1cy I actually haven’t ran the car for a while but just yesterday replaced the turbo due to low boost code but now I’m still stuck with the same issue but I did recently purchase a pressure test kit I figured that’s way easier than taking off the whole valve cover I’ll let you know how it goes
Пікірлер: 11