This video is Part 1 of 2 - The 2017 to 2022 Kawasaki Versys X300 changing of the front sprocket from the stock 14 tooth Rubber Cushion to a JT Sprocket 15 tooth Rubber Cushion. The JT Sprocket is an alternate sprocket that is different in the width of the sprocket at the center spline. This video is how to do this update and what is needed to take care of the width difference. The solution is to use two Kawasaki washer parts numbers to in essence fill the gap. The stock sprocket is 9.3mm wide and the alternate is 5.8mm wide. At length the JT Sprocket tech confirmed that this alternate will not be an issue with the narrower width. The two video will walk you through the process and provide the part numbers of everything needed. (the JT sprocket and the two Kawasaki washers). This is a pretty easy task to do it you have a the right tools. Ask any questions in the comments. The road test went great. There is an advantage with the 15 tooth sprocket to lower the RPM of the bike through out the gears. The new gear provides: 5500 rpm at 50 mph, 6700 rpm at 60 mph, 7700 rpm at 70 mph and 9000 rpm at 80 mph. About a 10% lowering in 6th gear.
Here is what you need to buy and where to buy the parts-
Sprocket sourced from (Dennis Kirk dot com) link: JT Sprockets Front Rubber Cushioned Sprocket - JTF565.15RB Motorcycle | www.denniskirk...
LINK: www.denniskirk...
YOU CAN ALSO buy this from Amazon with Free shipping for under $12 before tax.
LINK: www.amazon.com...
The two different genuine Kawasaki part number washers sourced from ( www.partzilla.com)
Quantity of THREE of the 92200-0851 Kawasaki washer, Kawasaki part number: 92200-0851 - WASHER |
LINK: www.partzilla....
Quantity of ONE of the 92200-1389 Kawasaki washer sourced from ( www.partzilla.com), Kawasaki part number: 92200-1389 - WASHER |
LINK: www.partzilla....
They're all inexpensive parts for this sprocket swap.
Негізгі бет 2017 to 2022 Kawasaki Versys X300 changing to a JT Sprocket 15T rubber cushion (part 1 of 2)
No video
Пікірлер: 63