Awesome vid!! I got lucky with the hood brackets. 😂 Thanks for posting!
@KyleDavisMusic
3 жыл бұрын
"This would make a great gift to your loved one." BRB, going to purchase it for my car and give it to my wife and see what she thinks...
@CJBroncoF150
3 жыл бұрын
Haha thats what i do!
@이동은-c9v
2 жыл бұрын
재조 없이 장착 가능해서 좋네요. 찾던 제품입니다. 무엇보다 빨간색 버튼으로 쉽게 분리 가능한 점이 맘에 드네요.
@realkkang
3 жыл бұрын
When installed on hoods of European wangler, the weight of the hood is heavier than that of the North American hood, so the gas spring cannot support the hood weight. (North American hoods are aluminum alloys, European steel-of course they are different in shape) I also installed this product (owned by a European wangler), but the gas spring did not support the weight of the hood. It was exchanged for a stronger gas spring from the manufacturer, but the hood does not open automatically as shown in the video. Gas springs installed on European hoods should have stronger gas springs. Improvement is required.
@MidlifeAdventurer
3 жыл бұрын
The only tool you need is the one missing from everybody's toolbox, a 10mm socket.
@CJBroncoF150
3 жыл бұрын
Haha, you are correct!
@Filzkiiz
3 жыл бұрын
MeRRyNeWyeaRz Mate!! All I need now is a jeep Rubicon..haha!! One day?!? CheeRz brO!!
@CJBroncoF150
3 жыл бұрын
Cheers!
@greghull3189
3 жыл бұрын
I installed a set of these Redline struts on my '18 JLU Wrangler a couple of weeks ago and am really impressed with them. Never trusted the durability of that yellow plastic end piece of the existing hood prop. Sounded like it was going to break every time I pulled the prop rod off.
@CJBroncoF150
3 жыл бұрын
We actually broke the one on the hemi jeep, these are a must have.
@skidave74
Жыл бұрын
Just installed on the 2024 JL! A little dicey with the two 10mm bolts in the hood bracket but went ok. Love the results!
@mathewletizia3561
3 жыл бұрын
I have the DV8 heat dispersion hood on my 2020 Jeep JL. Will these work with my DV8 hood?
@Cdubwow
2 жыл бұрын
These are great, BUT! The metal for the upper bracket is soft and you can easily strip out that silver metal bracket if you tighten the bolts a little too much. It should be made of harder steel. The hydraulic struts put a bunch of pressure on these brackets so you chouls be able to snug them down. And I didn't muscle them too hard either
@davidg847
3 жыл бұрын
love ur video and love this product,but my Rubicon has a steel hood. so much heavier than aluminum hood.
@CJBroncoF150
3 жыл бұрын
Ahhh, yes they will work just require more push to get them up!
@LeoHolanda_CANBR
2 жыл бұрын
They now offer sets for heavier hoods (mojave and non-US/392 models). Below from their product description: NOTE: If you have the Mojave Edition or a vehicle OUTSIDE North America, purchase 21-20006-02 system. If you have a Rubicon 392, purchase 21-20007-02. These vehicles have heavier OEM hoods and require higher force gas springs. All of the mounting hardware is the same for the 2018+ Jeep models, but the gas struts are different based on the hood application.
@dominiclemoine7201
3 жыл бұрын
Do the Quicklifts work with the rugged ridge jeep jt snorkel?
@sirwild
2 жыл бұрын
what cube light mount was those?
@robwarner4331
3 жыл бұрын
Installed on my 2019 JL best accessory ever.
@CJBroncoF150
3 жыл бұрын
Absolutely!
@davidlomax8902
3 жыл бұрын
Great video! Can these Redline hood struts be installed if I already have installed the Rugged Ridge Snorkel?
Пікірлер: 27