Watching along and then all of a sudden at 1:36 I expect to hear "DIS IS HYDRAULIC PRESS CHANNEL AND TODAY WE CRUSH MUSTANG"...
@JAG6.7
4 жыл бұрын
Tourqe specs?
@kinghatred
6 жыл бұрын
what song is playing in the background? I need to play this while i drove my mustang!
@stevemartyn7849
4 жыл бұрын
If you install cradle lockouts the subframe bracing won't fit right or am I wrong
@devanclos1994
6 жыл бұрын
Can anyone help me? I bought a mustang but the clutch pedal is super high about lil over a inch higher than the brake pedal. Can i make it lower to be even with the brake pedal?
@gigi9467
6 жыл бұрын
why dont u guys sate the torque values on this bolts?
@barano9729
6 жыл бұрын
Thank you Bill for another superb install video.
@TW-fx2jx
6 жыл бұрын
Bill, could you please give me your top 3 upgrades to a base 2017 Focus ST, that won't affect the warranty? Thanks so much! Your videos are the best on KZitem.
@jordanwilson9627
6 жыл бұрын
Todd Wilson don't be a puss just tune it
@mattjones1378
4 жыл бұрын
Does this make the car handle better in taking turns?
@silverado9964
4 жыл бұрын
Can you use ramps to do this installation?
@cjponyparts
4 жыл бұрын
Yes you can do this on ramps.
@silverado9964
4 жыл бұрын
CJ Pony Parts awesome thanks!
@chrisLS1x
6 жыл бұрын
Bill. Did you paint the rear diff or is Ford painting them now at the factory?
@cjponyparts
6 жыл бұрын
That is all factory
@danmancino22
6 жыл бұрын
Noice
@leandromamute03
6 жыл бұрын
"Welcome to the HU-draulic Press Channel"
@jameswhite8453
6 жыл бұрын
Any experienced advice appreciated. Is it possible to install this improvement and Steeda low profile jacking rails? If so, how is that best done? Both being awesome; I don't want to choose one or the other.
@Zerogivengarage
6 жыл бұрын
Yes they can be installed together, I did this on my 2015
@jameswhite8453
6 жыл бұрын
Bill Tumas thanks for responding Did you install the subframe braces first before the low profile jacking rails. I am extremely new to upgrade installing, so any advice will greatly appreciated.
@jameswhite8453
6 жыл бұрын
A double install video would be cool. I haven't found an install video for the jacking rails. Too basic for video, maybe?
@Zerogivengarage
6 жыл бұрын
They are extremely easy to install. We had a video but Steeda made a slight change to the design so we took it down.
@jameswhite8453
6 жыл бұрын
Thanks
@android-ud2nf
6 жыл бұрын
i have a 2015 performance pack and the rear has a squeek. Do you know what it is? is it normal for the performance pack to ride very stiff? I just picked up one used with 14k miles.
@Zerogivengarage
6 жыл бұрын
The performance pack will be a little on the stuff side from the factory, the squeak could be any number of things, I would start by checking for work bushings.
@android-ud2nf
6 жыл бұрын
Bill Tumas awesome. im fine with it being stiff as long as i know nothing is wrong. as long as the bushing ill have to maybe get it into ford .
@You-got-a-big-dick
2 жыл бұрын
Probably needs some grease in the bushings!
@yamahaha_4072
6 жыл бұрын
Do these interfere with the jacking rail install
@davidjones3841
6 жыл бұрын
Reel Hyper JLU not if you get steeda brand, It won’t fit with BMR
@bryan70546
6 жыл бұрын
I did all the steeda stop the hop on my 17 but I still get a little bit of wheel hop car feels a lot more solid thou
@Zerogivengarage
6 жыл бұрын
What tires are you running? It will be hard to entirely eliminate the hop with the factory Pirellis
@jameswhite8453
6 жыл бұрын
Are the '18 Michelin Tires much better?
@Zerogivengarage
6 жыл бұрын
Much
@neilcitraro7032
6 жыл бұрын
I am running Michelin Pilot Sport Cup and they are sticky.
@reptarthetrx2408
6 жыл бұрын
How would you compare these to BMR's subframe brace?
@Zerogivengarage
6 жыл бұрын
I have not used these but both do the same basic job.
Пікірлер: 38