If you do this on a 4X4, you need to remove the CV axle nut to relieve pressure. Otherwise, you'll dislocate the CV joint which is a pain to reinstall.
@differentgarageprojects5656
Жыл бұрын
Thanks for the info i had to pin it incase anyone with a 4x4 decides to do this.
@chaldothug45
Жыл бұрын
Dude, you're a freaking genius. You know how to explain things perfectly. This is the only way that worked for me
@miguelcadete2495
2 жыл бұрын
Thank you very much, I’m going to do the same thing to my two wheel drive. Looks great.
@differentgarageprojects5656
2 жыл бұрын
No problem glad to helped.
@stevetorres2573
2 жыл бұрын
Solid video and instructions brother. looking for someone to do this for me on my 2021 ford ranger xlt
@differentgarageprojects5656
2 жыл бұрын
Thanks brotha I’m sure a shop can do it for a reasonable price.
@bmack2938
6 ай бұрын
On my 21 sport 4x4 neither tie rod would drop. I beat on it quite a bit and no movement at all. I put some PB blaster and no help. I put a wood block on the bolt and still it wouldn’t come out either side. I had to put it all back together. I guess my mechanic is gonna have to do it.
@conejo0919
Жыл бұрын
Awesome video, I want to do this myself. My question to you is. Did you lift the truck one side a time to put the jack stand or where will i find the center lifting point to lift the tires at same time? Also what ton jacks? Im sure both tires have to be off ground as can't do one side at a time? Sorry newbie questions on doing lift level. Thank you in advance.
@differentgarageprojects5656
Жыл бұрын
Go for it bro easy job. And no worries bro we all start somewhere The way I lifted up the truck to sit on jack-stands was by lifting it underneath the control arm and yeah, I did one at a time. Jack stands are 3 ton rated. And yes, you want both tires off the ground.
@lowboostedaccord4933
2 жыл бұрын
Nice one bro keep up the great work brotha 🤘💯
@differentgarageprojects5656
2 жыл бұрын
Thanks brotha
@jacksmrt507
2 жыл бұрын
Looks like a good install. I’m concerned about stressing the brake line
@differentgarageprojects5656
2 жыл бұрын
Wasn’t to bad honestly
@jorgeicastanon
Жыл бұрын
Hello, how do you aling the spacer bolts with the holes? You need to compress the spring?
@differentgarageprojects5656
Жыл бұрын
Honestly they where almost where i needed them to be. 1 spacer was off by a bit and i just twisted it by hand.
@seantjohnson
Жыл бұрын
Do you have to adjust the headlights after installing a leveling kit?
@differentgarageprojects5656
Жыл бұрын
No they seemed fine after installing them. And we even upgraded to led bulbs which are brighter nd no adjustment needed
@antcar97
Жыл бұрын
great install but i was cringing on that brake line
@blasgarcia6825
Жыл бұрын
Thanks!
@UserConn
2 жыл бұрын
Will be doing this very soon.
@UserConn
2 жыл бұрын
Very helpful. I know I can tackle this now.
@differentgarageprojects5656
2 жыл бұрын
@@UserConn glad this helped out 👍🏼
@matthew197735
Жыл бұрын
I've seen a lot of videos on this but no one has used a spring compressor yes i see its not necessary but i trying to figure out if it would it make it easier to use one?
@differentgarageprojects5656
Жыл бұрын
Not needed honestly not bad of a job
@marcanthony854
Жыл бұрын
No compressor needed at all
@differentgarageprojects5656
Жыл бұрын
@@marcanthony854 no
@xiaowei7606
7 ай бұрын
is it ok just to lift the front ?
@differentgarageprojects5656
7 ай бұрын
That’s pretty Much will we did here?
@xiaowei7606
7 ай бұрын
@@differentgarageprojects5656 but is it safe ? How is the wheel handling?
@differentgarageprojects5656
7 ай бұрын
@@xiaowei7606 All we did was level the front so it can match the rear.
@differentgarageprojects5656
7 ай бұрын
@@xiaowei7606 Suspension feels the same nothing changed still has the same handling
@xiaowei7606
7 ай бұрын
@differentgarageprojects5656 Thanks for your sharing
@bernardbrowne5205
Жыл бұрын
Nice thanks
@tylerpaulvlogs7564
2 жыл бұрын
which kit is it?
@differentgarageprojects5656
2 жыл бұрын
Link in the description
@sheanprunier8950
9 ай бұрын
Can't you just drop the bottom of the A arm out ????
Пікірлер: 38