I admire your work and appreciate the time you take to reply to every question . Keep up the good work ❤❤
@PouringSomeLove
9 ай бұрын
Thank you so much for your kind words 🙏
@lynnegarrett6288
Ай бұрын
Love, Love, Love this idea!
@PouringSomeLove
Ай бұрын
Thank you 😊
@Whetty_Empire
5 ай бұрын
❤❤❤ thanks for the guidance
@PouringSomeLove
4 ай бұрын
You're welcome 😊
@lilsresin
7 ай бұрын
Brilliant work xx
@PouringSomeLove
7 ай бұрын
Thank you 😊
@bablisharma2939
Жыл бұрын
Thank you so much for your vedio,,,it was just so helpful.... Love from Assam ❤️ India
@PouringSomeLove
Жыл бұрын
Thank you for stopping by 😊💖💖
@isabellelinsolas623
7 ай бұрын
Et Merci pour ce magnifique tuto super ces stylos
@PouringSomeLove
7 ай бұрын
Thank you 😊
@evelynbrown5312
Жыл бұрын
Beautiful, after watching this, I had to have a go even if it was midnight here in Scotland. I just had these moulds delivered this week and found some pens and pastel coloured plastic straws in the cupboard, fingers crossed it works for me 😊
@PouringSomeLove
Жыл бұрын
It may need a little practice but don't give up, please. Play around it and have a fun 😉 💖💖
@evelynbrown5312
Жыл бұрын
Success with 1 after a bit of tweaking, the resin leaked into the pen end of the other, pity as they do look beautiful & shimmer
@staceykassahn7134
8 ай бұрын
Can you tell me what kind of refills you used and where you got them?
@PouringSomeLove
7 ай бұрын
They are reffills from BIC Crystal pens. Widely available in all supermarkets and stationery stores.
@mariabouldin2486
11 ай бұрын
Beautiful..
@PouringSomeLove
11 ай бұрын
Thank you 😊
@محمدحذيفةبنخليقالانصاري
Жыл бұрын
thanks for this guidance❤❤❤❤
@PouringSomeLove
Жыл бұрын
Thank you for watching 😊💖💖
@adoreco1
21 күн бұрын
Did you leave in the bluetack at the back?
@PouringSomeLove
16 күн бұрын
If it's too visible, I take it off. Otherwise, leave it on
@sacredvisions6807
Ай бұрын
Hello. I just received my pen molds., im excited about following this tutorial. What font style did you use? I have a cricut, creative fabrica app and i use da font.
@PouringSomeLove
Ай бұрын
I use Joseph Sophia. Good luck with your project 👍
@THEQUEENSAMPSON
Жыл бұрын
Nuce job. Do you have a tutorial on how to make mold holder with plastic knives?
@PouringSomeLove
Жыл бұрын
Sorry, I don't 😞 Thank you for your comment, though 😊💖
@anitapurdy08
Жыл бұрын
Brilliant. Straws come in different sizes. What size is the hole please?😊
@PouringSomeLove
Жыл бұрын
I have no idea what's the diameter of the hole is. I took my refill pen to compare and luckily, there was one open package so I checked it and it was perfect.
@PouringSomeLove
Жыл бұрын
I have explained in the video how you can make a little bigger for the refill head if it's a small hole. Hope it helps!
@BeckyF-dn8kq
Жыл бұрын
Also .... are you drilling and putting the eye pin through the blu tack?
@PouringSomeLove
Жыл бұрын
Eye pin is drilled through on the side where the resin, not on blue tack.
@gerayli9735
7 ай бұрын
I greet you from Azerbaijan. Please tell me, are the pens disposable? Is it possible to make sure that they are not disposable?
@PouringSomeLove
6 ай бұрын
They are reusable.
@mudiasstyling513
Ай бұрын
Thank you so much 🙏 Please can i get the materials you used from jumia? And what are the names of the materials 🙏
@PouringSomeLove
15 күн бұрын
Sorry, I don't understand what you meant. All the products I use are listed in the description box.
@yenimartinez5031
Жыл бұрын
Beautiful. I am still lost as to what kind of paper you used for the lettering
@PouringSomeLove
Жыл бұрын
Thank you 😊 On these pens, I have used gold textured vinyl, which I cut on my cricut machine. If you have a cricut or silhouette machine, you'll understand what I meant.
@SnugglesSims
9 ай бұрын
Is there any other way to use lettering other than circuit machine
@chrismunroe8272
3 ай бұрын
Did you use just resin or epoxy to do the pens and at the end to fill them i use to make them with epoxy. i would love to use just resin. beautiful pen i am excited to use the straws the ink always just floated up tysm
@PouringSomeLove
3 ай бұрын
I have epoxy resin. Thank you 😊
@kasimerosario6736
Жыл бұрын
can you tell me how you do the letters and what size and what kind of material it is...thank you, love your work
@PouringSomeLove
Жыл бұрын
I use my cricut maker machine to cut vinyls for letterings and silhouettes. They are vinyls with glue on the other side, so easily stick on cured resin and seal with clear resin. Hope this helps!
@nino_shashiashvili
Ай бұрын
@@PouringSomeLove can you choose where i can buy machine like this?
@kerrontyrrell5890
Жыл бұрын
What is the name of the pen that you use to refill
@PouringSomeLove
Жыл бұрын
Sorry, I didn't see your comment 🤦♀️ the pens are available in all supermarkets, WH Smith and Wilko and other stationery storesThey come 10 in yellow packaging. The brand is BIC Cristal Original. Thank you 😊
@ebmhen
8 ай бұрын
Do you buy the Bic Cristal Pens and pull the stick out of its casing? I ask because the refills have been discontinued.
@PouringSomeLove
8 ай бұрын
Yes, get the reffill out from the pens and use it in resin pens.
@ebmhen
8 ай бұрын
I truly appreciate your quick responses. I was able to find the Bic Cristal Ballpoint Pens and remove the refill. I'll be working on it this weekend. Thanks so much!
@ebmhen
8 ай бұрын
I purchased my pen silicone molds with refills and caps from Amazon. The refills are 5.5 inches, but the tip is so much smaller than the straw. You do show that there is a way to make the hole in the straw larger. Is there a way that I can make the hole smaller? What do you suggest?
@PouringSomeLove
8 ай бұрын
If you make a hole smaller, still those reffill won't work in straw. Those reffill don't have support on tip which holds them in straw. You have to buy Bic brand pens and take the reffill out from the pens. Bic pens come in different colours.
@ebmhen
8 ай бұрын
Thanks so much!
@ebmhen
8 ай бұрын
Your pens are beautiful! How can you make the letters without a Cricut?
@PouringSomeLove
8 ай бұрын
You can write names using acrylic or posca pens. Let it dry before sealing with a clear layer of resin.
@mudiasstyling513
Ай бұрын
Thanks so much 🙏 Please I am from Nigeria, how can I get all the items you used? Can I get them from jumia? And please can you list the names of the materials you used 🙏
@Qui7422
3 ай бұрын
Where do i get the straws. ? Plz and thank you
@PouringSomeLove
3 ай бұрын
I bought them from a local store.
@gbunch15
Жыл бұрын
I have a couple of pen molds but they (of course) came with no directions...Thanks for the great guidance!
@PouringSomeLove
Жыл бұрын
You're welcome 😊 Thank you for watching 💖
@siamese35
Жыл бұрын
Do the refills stay in the pen very well? They look very loose.
@PouringSomeLove
Жыл бұрын
If you cut the exact size of the mold, they will. When you place them in mold, they are very secure at the top end because of the narrow end, but the bottom has to touch the end properly. The middle one was tiny bit short so I had to push it down. Also be careful around the straw when you try to remove bubbles from the front end, the straw could get moved. I still mess up sometimes. It does need a lot of practice but once you gets used with straw part, it's very easy and fun to make. The wider pen mold ones are very easy to make because the both ends gets secure properly. Square pens are very popular for selling though! Hope this explanation helps! 💖
@faithomamogho7492
Жыл бұрын
Please what type of resin is best to use?? I love your work,it's beautiful
@PouringSomeLove
Жыл бұрын
I use Jdiction resin 😊💖💖
@ebmhen
8 ай бұрын
Now that I have the pens, I'm having trouble finding the correct straws. The coffee stirrers are too small and the clear straws that I got from Amazon are a little too big. What straws do you suggest that I get (i.e.: size)? Thanks again.
@PouringSomeLove
7 ай бұрын
I'll record a video on how to make holes smaller or bigger when I get a chance. I typed down a long explanation to your comment around 2 weeks ago, but I think I didn't hit the send button. That's why my reply is missing 🤦♀️
@ayibatonyekipaminikurobo1685
7 ай бұрын
Please I await the video too🥺
@koke353
6 ай бұрын
I want this refill link,😢
@PouringSomeLove
6 ай бұрын
I buy from stationery stores or supermarkets.
@amonisecharles4551
Жыл бұрын
Are these straws like ordinary drinking plastic straws ?
@PouringSomeLove
Жыл бұрын
Yes, they are. Use the clear straw not the colour ones. Also make sure they are not too wide for refill tip. Thank you 😊
@zahrasaadaoui1302
9 ай бұрын
What is the font that you used and thank you❤
@PouringSomeLove
9 ай бұрын
It's Joseph Sophia
@alysonmylesguerra8524
11 ай бұрын
Hi where to buy those refill pen? 😊
@PouringSomeLove
11 ай бұрын
The pens are available in all supermarkets, WH Smith and other stationery storesThey come 10 in yellow packaging. The brand is BIC Cristal Original. Btw, I live in the UK so I got from the UK store. Thank you 😊
@jeannetteclyburn377
8 ай бұрын
where did you get those straws. I cannot find ones that are small enough here in the states
@PouringSomeLove
7 ай бұрын
I'm in the UK. I buy from my local store. I'll make short how to smaller or make bigger holes using heat.
@niteczka9728
3 ай бұрын
what tube do you use? how many cm is it?
@irenehetherington6793
Жыл бұрын
these are gorgeous, what font and size do you use for the pens please
@PouringSomeLove
Жыл бұрын
It's 3.50cm width and 0.70cm height. Thank you 😊
@pahelrohra08
Жыл бұрын
U used 2:1 or 3:1
@PouringSomeLove
Жыл бұрын
I use 1:1 epoxy resin for almost everything. I use 2:1 only for deep pour. Thank you 😊
@islamicpillars7032
24 күн бұрын
Mam plz rasho ?
@flaviaferrara8152
Жыл бұрын
Hi from where did you purchased the plastic stick/tube?
@flaviaferrara8152
Жыл бұрын
May I ask you the link ?
@PouringSomeLove
Жыл бұрын
They are normal drinking straws. I bought from local store. When you buy make sure to buy clear ones not the colour ones and not too wide so refill tip can fit. Thank you 😊
@clarebarton9694
Жыл бұрын
can i please ask where you got the moulds the refils and the inserts from please, ive been searching for them today after watching your tutorial the other day and cannot find them anywhere x
@PouringSomeLove
Жыл бұрын
I got molds from Aliexpress, straw for for inserts I bought from my local store and refills I use are from normal pens. The one comes in yellow packaging from Asda or Wilko. They sell as 10 in a pack in black, blue and red colours. I'm on holidays right now, so I can't send you a pic of packaging. Send me a message on instagram or on my FB page Pouring Some Love. I'll send you picture of the packaging when I get back from the holidays. Xx
@Colour9Creation
10 ай бұрын
Please whats the name of the tape you used to remove the names from the paper 🙏🙏🙏🙏🙏
@PouringSomeLove
10 ай бұрын
I use transfer tape. I buy from Alison on FB. Sometimes, I use masking tape as well. It also works well. Check my instagram, I have done a short video on masking tape. Hope it helps 🙏
@PouringSomeLove
10 ай бұрын
This is the video. I'll post on KZitem as well. instagram.com/reel/CpQw9eNIp6S/?igshid=MzRlODBiNWFlZA==
@Colour9Creation
10 ай бұрын
@@PouringSomeLove ok thank you very much
@endz622
Жыл бұрын
What type of material or how to print names then stick to the resin? Please I am a beginner ❤
@PouringSomeLove
Жыл бұрын
I have got a cricut machine, so cut vinyls letter on my machine the size I want. I'll be selling soon on my Etsy shop.
@BeckyF-dn8kq
Жыл бұрын
Does the nib or the plastic tip on the mould go into the b tack?
@PouringSomeLove
Жыл бұрын
When I use blue tack in straw, I cut straw little bit more so silicone nib doesn't reach the end of straw and back get covered with resin. When I don't use blue tack in back of straw, I make sure straw cut exact same size of mold so the silicon nib fits inside. When you do second way and back stays open which is visible from the end. Hope you what I meant 😊
@BeckyF-dn8kq
Жыл бұрын
@@PouringSomeLove Yes, thank you so much.
@sajahamdan7873
Жыл бұрын
Hi from where can i print the name stickers please answer
@PouringSomeLove
Жыл бұрын
I cut them myself on my cricut machine. I'm opening up my Etsy shop this week. I'll list there, too 👍
@omayrarivera1823
Жыл бұрын
What mold did u use for the heart?
@PouringSomeLove
Жыл бұрын
I have very tiny heart mold from Aliexpress. Thank you 😊
@elizabeths8321
Жыл бұрын
Beautiful work. What is the diameter of the straw?
@PouringSomeLove
Жыл бұрын
Sorry, for some reason, I missed your comment. I've just seen it now. The diameter is between 0.4 cm and 0.5 cm. It's not exactly either of them. If you have bigger or smaller, it's still works. Before placing straw in mold, put the refill in and heat straw with lighter. Just be careful not to heat too much. Once it's warm up, for smaller hole - push the reffil up to make bigger and for bigger hole - roll between your finger to make it small but make sure you have refill in. After this, take the refill and you place in mold to make refillable resin pens. Hope the explanation helps 😊🙏
@Dslayer90
7 ай бұрын
May I ask when can I source the pen inks with those nibs on it?
@PouringSomeLove
7 ай бұрын
They are refills from BIC Crystal pens. Widely available in all supermarkets and stationery stores.
@JamsheeraKannoth
7 ай бұрын
Where do we get that pen refiller
@PouringSomeLove
7 ай бұрын
I take the refill out from BIC Crystal brand pens and use them.
@Epoxid_Geschenkideen
22 күн бұрын
wie hast diese sticker gemacht ?
@PouringSomeLove
16 күн бұрын
I cut on my cricut machine 😊
@Epoxid_Geschenkideen
16 күн бұрын
@@PouringSomeLove Dankeschön🙂
@Islamic_Soul_0
12 күн бұрын
Font name plzz tell me
@PouringSomeLove
10 күн бұрын
Joseph sophia
@YazminMartínez-p7g
7 ай бұрын
Are you here in USA ?
@PouringSomeLove
7 ай бұрын
UK
@melaniewijnandts15
9 ай бұрын
Welche Kugeschreiber mienen nimmst du?
@PouringSomeLove
9 ай бұрын
Do you mean pen refill? The brand is called Bic Crystal original.
@melaniewijnandts15
9 ай бұрын
Ja genau die pen refil
@Laiba-h8r
Ай бұрын
I make resin pen but the pen is not working I don't know what's the mistake I do if you know kindly please tell me
@thedragonflywhisperer8134
18 күн бұрын
Did you leave the hole in the top of the pen or did you fill it in?
@PouringSomeLove
15 күн бұрын
If you are using refill straight in resin when it gets blocked from the end, it doesn't work. Some refill needs airflow to work properly.
@Laiba-h8r
15 күн бұрын
@@PouringSomeLove but I use tape at the end of refill that the resin not enter in the refill
@PouringSomeLove
15 күн бұрын
Air is blocked, that's why. Some ink prefer to have air circulation. They don't work when the air is blocked with the resin or tape.
@Laiba-h8r
15 күн бұрын
@@PouringSomeLove Is there is difference between ball point refill or other refill ink?
@HAMZAKAMBOOH-ln9fo
10 ай бұрын
How you made resin
@PouringSomeLove
10 ай бұрын
I don't understand what you meant! I buy resin to make resin stuff!
Пікірлер: 127