Are you using a stable power source for this type of programming?
@frankmayo7306
9 ай бұрын
I have a wrecked 2020 same car and the insurance company wants me to use a used rack is it worth trying or not ?
@husseinsafaa310
Жыл бұрын
Hello bro.. I have the same problem!! Have you exchanged any of the tools. Or just programming?
@piotrekk26
2 жыл бұрын
Hi. Great video. I was wondering if you could help me with my vehicle. On a 2021 Equinox I replaced the Body Control Module. After replacement the original key wouldn't program. New key fob programmed fine but the immobilizer is stuck in the key programming mode looking for a second key. The 12 second rule doesn't help. The immobilizer light is also on but the car starts fine. Does this mean that I have to program a second key for the immobilizer to go back to normal state? Thank a lot.
@huyug1
2 жыл бұрын
Thanks. Yes basically the car will be stuck in learning mode until you have a second key learned to vehicle. Actually I just did the same car about 2 days ago. I also was not able to program the original key and I did not investigate why. I programmed 2 new keys and programmed the module using SPS2 and done.
@mekanik3787
2 жыл бұрын
Hi! Great info as always. Curious what programming software are you using. Thanks!👍
@huyug1
2 жыл бұрын
It’s called SPS
@mekanik3787
2 жыл бұрын
@@huyug1 Can you recommend a reputable seller / website? Can Autel IM608 be used to perform this service? Tnx!👌
@huyug1
2 жыл бұрын
@@mekanik3787 www.acdelcotds.com that’s the official website for any GM vehicle.
@mekanik3787
2 жыл бұрын
@@huyug1 Tnx!👍
@dixiapadilla
Жыл бұрын
Hi can You program My car have the send problem
@mohamedsuliman2368
7 ай бұрын
i had same thing on chevy malibu 2017 but it won't go succufuly it says "device limit exceeded" any idea what that ?
@huyug1
7 ай бұрын
Probably you are trying with a used steering rack
@josepena1046
2 жыл бұрын
Can i use a (used) rack n pinon? Or has to be new ones
@huyug1
2 жыл бұрын
On that particular vehicle we have tried two different used racks and no success. It only worked with brand new one.
@husseinsafaa310
Жыл бұрын
@@huyug1 Hello bro.. I have the same problem!! Have you exchanged any of the tools. Or just programming?
@truth4reel
Жыл бұрын
What's up bro? I think the first step (prepare module for removal) is unnecessary when you don't have the original module in place and communicating. If you have a brand new module already in place just go straight to programming.
Пікірлер: 23