i am having the very same issue on my 2011 328i, i did what you did to valvetronic motor and it starts and runs perfect , is it ok to run it this way unpluged ?
@kristapsdaviskomarovs4709
2 жыл бұрын
Yes sir. I know some guys driving like this for years.
@radicakhan1858
2 жыл бұрын
I had a 2007 i328 I got the same problem idk if I should do it
@Bmwboy504
Жыл бұрын
@@radicakhan1858 did it work
@user-ls3wi8rd9b
Жыл бұрын
Hi what could be wrong if engine cuts off random times? Checked everything cant find problem
@auraskye4924
Жыл бұрын
@@user-ls3wi8rd9b could be an early sign of a vacuum leak or even possibly a valve failure. High or low idle?
@wberm7708
3 жыл бұрын
What a legend. I change my valve cover seal and all the seals on the cover then when starting the car it starts but the moment I gave it gas it will lose power and if I go on drive or reverse it would not accelerate.. so the more I press on the gas the car will lose energy. I try many things check leaks connection. I was so close t asking everything apart until I saw your video. It worked like a charm.. awesome thank you so much Update. It happen again. So I decided to measure resistant from the valvetronic connector pins to the valtronic case and I saw numbers on the reader. I order new one and did the same test on the new one and I saw no numbers so I swapped the valvetronic and didn't need to do the allen key. It just relearn it self and it works like a charm. I suggest everyone to check resistance first before anything you can even check while the Valvetronic is on the car just disconnect the connection.
@MDALAMIN-wz9ko
Жыл бұрын
How long it last before it happen again?
@Mairitta
4 жыл бұрын
Working on my bmw for two years no mechanic could figure out what was causing it to turn off paid so much money for no reason this was it thanks so much 🙏🏼
@kristapsdaviskomarovs4709
4 жыл бұрын
Mairitta now you know that your eccentric shaft sensor is dead. You can check eccentric shaft connector. If there is oil, then it is broken.
@Mairitta
4 жыл бұрын
Kristaps Dāvis Komarovs it wouldn’t be the actuator ? I was thinking of replacing that ?
@Mairitta
4 жыл бұрын
Kristaps Dāvis Komarovs the valvetronic motor ?
@kristapsdaviskomarovs4709
4 жыл бұрын
No. First check the eccentric shaft sensor. If there is oil, then you have to replace eccentric shaft sensor
@chevyboa8950
4 жыл бұрын
Currently a couple thousand in on this same issue and it persists
@blakelevario2141
2 жыл бұрын
You just saved my ass! Worked like a charm. I was making a delivery and all this sudden my car would start then immediately shut off. This got me going
@zinniyah-priscillaisrael6617
4 жыл бұрын
This awesome recommendation!! Thank you 😊 my 2008 BMW 328i runs out gas and then got some put in wouldn’t start and I decided to see why and I came across videos and I just selected yours and follow exactly and now it started back up!
@princemusukwa5529
Жыл бұрын
I had the same problem on my e90 323i 2007...i just changed the vvt and boom the vehicle was up moving like never before..thanks to this video
@mr.gaming1367
11 ай бұрын
worked on my 128i 2011 i’ve been having problems with the whole valvetronic system and this fixed it and i checked and saw oil in the eccentric shaft sensor thank you!!!!
@OldSchoolGamer1988
4 жыл бұрын
Wow!!! thanks for sharing this. This was a life saver for me. I'm not a mechanic at all. But mine done this literally about an hour ago after getting gas. Done this and i was back on the road
@alexkeenan2575
3 жыл бұрын
Sorry to be off topic but does anybody know a trick to get back into an instagram account?? I stupidly lost my login password. I would appreciate any tricks you can offer me!
@davidharlan6147
3 жыл бұрын
@Alex Keenan instablaster ;)
@alexkeenan2575
3 жыл бұрын
@David Harlan I really appreciate your reply. I found the site on google and Im in the hacking process now. I see it takes a while so I will get back to you later with my results.
@alexkeenan2575
3 жыл бұрын
@David Harlan it worked and I actually got access to my account again. I'm so happy:D Thanks so much, you saved my ass :D
@davidharlan6147
3 жыл бұрын
@Alex Keenan Happy to help :D
@bobglazeman5474
Жыл бұрын
Worked flawlessly😌thank you!
@moneeralbakree-lm9vz
Жыл бұрын
Thank you very much, dear genius, and I hope you will help us with a solution to the delay in operation
@highlightfactory7588
2 ай бұрын
Paldies par so video. Man ļoti palīdzēja
@valentinramirez9537
2 жыл бұрын
Thank you man you did a solid miracle for my struggles and by this your you tube video
@questions703
5 жыл бұрын
Thank you very much. It worked. It even almost feels like I unlocked some extra horse power. Btw is it the same as learning valvetronic limit positions via obd?
@frenchmontana423
3 жыл бұрын
why would you leave that unplugged?
@numberoneokay
10 ай бұрын
with my 4 mm allen key I turned it in clockwise and it only turned in 7 or eight turnstill it stopped. I then backed it off about thirteen turns and it worked. It did rough idle when started so I backed it out one more turn and voila , seems good now. thank you Kris
@kristapsdaviskomarovs4709
10 ай бұрын
Glad to help you 👍🏻☺️
@robertevert1282
3 жыл бұрын
You sir, Are a genius!!
@blakelevario2141
2 жыл бұрын
The tools that came with the e90 in the trunk, there's an Allen wrench in the kit that fits
@user-yq3gw8gy1m
9 ай бұрын
It worked on my 2011 328i x drive. It only turned 6 1/2 turns before it stopped. I backed it out 14 turns. I started it without the plug in and it died. I plugged it back in and it started right up and ran like a champ.
@milanhorvath3079
4 жыл бұрын
Hello mate thanks for showing . I just have a question do i have to plug back the cabel aftar start??
@Bipset
2 жыл бұрын
Just bought a 325i for 1k fixed my idle and stalling issue literally did trial and error with the sensors and MAF sensor is bad unplugged it and did this procedure and car is running 95% better very slight surge
@daveroberts936
3 жыл бұрын
Its always fascinating to me how people come up with these fixes! Like, what made you think of that? And what does that do exactly to get the results that you did? Why did you not plug that wire back in?
@timothyowens847
3 жыл бұрын
For real lol there's no way in fuck I'm doing this unless I know what it's adjusting. You could do some serious damage down the road
@kristapsdaviskomarovs4709
3 жыл бұрын
@@timothyowens847 nah. I drove like this for two years. I just manually set valve limit position. And yeah. Only after two years i replaced the eccentric shaft sensor and connected back that wire. 😁 And only then i relearned my car valve limit positions. Now only fuel economy is better. Same power, same driving.
@azzz7998
Жыл бұрын
This if it starts and dies instantly if it runs for awhile then dies is something different . Would hate for people to lose there car bc they play with this
@geeva99
Жыл бұрын
@@azzz7998I this issue too did this work for you?
@fetlocks3
Жыл бұрын
Thank You, for posting this. LEN, UK.
@naphtaliemolale4447
3 жыл бұрын
Hi! Mine is doing the same now started yesterday, its a N46 engen will it work. Do I also need to plug it after the adjustments.
@florotorralba1586
Жыл бұрын
Thanks you so much for sharing your talent.
@NoLimitsDetailing
Жыл бұрын
What if you disconnect both the Valvetronic and the shaft sensor? Or can you just disconnect the shaft sensor?
@jamesbrown8872
11 ай бұрын
thank you bro !! this video helped me out alot worked like a charm 🤘
@reginaldromain3336
3 жыл бұрын
Hi thanks for your video, I did exactly this , it starts but funny sound coming from engine if I replug it it sounds fine again but idling any advice
@genechevy7620
4 жыл бұрын
My BMW does that and it takes a long time for a title up to have power and then I will lose power the is that what’s wrong with it does that car do that to
@youthajocksaengsiri2795
Ай бұрын
My 2012 BMW 128i Coupe began experiencing this issue, but it didn't apply to my car. I have to unplug the MAF, it runs and drives good for a few miles than stall and stop. Can't start up until it get cool down.
@STAT303954
Ай бұрын
From my youtubing today might be be valvtronics?
@I3SIZerO
11 ай бұрын
Hey, what is the difference between 12 or 14 spins?
@danielpatterson2382
2 жыл бұрын
Same issue but I have an n54 so it doesn’t have that valvetronic motor
@nazirgill178
3 жыл бұрын
Thank youfor this vedio to fix my Bmw car i think it will help me
@juananzaldua8518
2 жыл бұрын
Thank you Sr.I will try it.
@jiaah7.-8
2 жыл бұрын
Why do you use key after disconnecting ?
@cincomorales
3 жыл бұрын
Thank you for making this video
@daveroberts936
4 жыл бұрын
What is that thing, and what did you do?
@musicmaster7966
3 жыл бұрын
Kas tas bija ko Tu atvienoji? Un vai uz x5 e53 ja tāda pati problēma tas izdosies?
@entorqueautomovel298
11 ай бұрын
Does this support on w diesel cars as well I have the crank but no start issue in my car and it was all good before getting stopped and no error codes
@badgyaljadeofficial9278
2 жыл бұрын
Am having this same problem right now with my 2011 320i Bmw 🤦♀️
@uncommonsense360
2 жыл бұрын
what's that connector? should I buy a new one? is this a temporary fix?
@g4briel505
8 ай бұрын
Do we have to put the connector back after starting?
@brandonirvin5870
Жыл бұрын
Hey. I’m having a similar issue w 530i 07, you leave unplugged, I’d love for this to fix but but stopped after starting and not sure if you leave it unplugged and if that will have effect now or later.
@azzz7998
Жыл бұрын
Oil change of its doing it regularly ask me how I know
@mikeychainsaw9760
3 жыл бұрын
I have a 2001 530i I don't no if it will work for me. I don't have the tools to pop the engine hood off
@armandovilla3509
Жыл бұрын
Will this work on a 2011 528i v6 naturally aspirated engine? Please help
@MrJinwright
2 жыл бұрын
Does this work on the n54 engines as well?
@yapkh8
2 жыл бұрын
for f 30 ,2013 , can i do the same ? start and dies off ,where is the valvetronic motor located ?
@mills7588
2 жыл бұрын
I have a 11 528i, my car had the exact same symptoms as yours, when i started it died immediately, i did your exact steps, clockwise till stop then 14 counter, but when I started it the car had a rough idle, and the rpms would bounce up and down, and im for certain i heard a pop out the engine after reviving, Im fully stock
@kristapsdaviskomarovs4709
2 жыл бұрын
I recomend you to try count how much full spins you have from one side to another and then set it in middle
@mills7588
2 жыл бұрын
@@kristapsdaviskomarovs4709 ok i will try it when i get back home from vacation, so this means the valvetronic motor is bad? If so what causes it to go bad? I replace that part 2 years ago, exactly around this time during covid, and i havent driven 10,000 miles (from US)
@grapeseed427
Жыл бұрын
@@mills7588did it help your problem?
@junvalle4260
2 жыл бұрын
sir what do i need to buy valvetronic actuator and eccentric shaft? to fix the problem tia!
@pruuf1
Жыл бұрын
Having similar issue with 335is. Any suggestions? TY
@GalaxSyAmswood
3 жыл бұрын
What size is the Alain key that you used
@cincomorales
3 жыл бұрын
4 mm
@M-Studio205
9 ай бұрын
I have got 520d 58plate, car is cranking but not starting , on the second crank the car starts but stalls after few seconds, i have checked injectors fuel pump but they are okey ???? Any help please
@Geebee246
Жыл бұрын
The car will start on second try without doing anything . What happens when your car sits like over night it loses pressure on the fuel system . That’s why when you start and hit the gas it will stay running.
@thebaekay113
11 ай бұрын
Im wondering the same thing , I have a 2014 bmw 328i and am struggling to keep it running
@newtonfueramierda7053
5 жыл бұрын
What is that part call , i got a e39 2001 525i doing the same thing.
@kristapsdaviskomarovs4709
5 жыл бұрын
isaac roque Valvetronic Actuator Motor
@newtonfueramierda7053
5 жыл бұрын
Thanks
@ericsaavedra4989
4 жыл бұрын
Newton Fuera mierda did it work
@MakhloufA
3 жыл бұрын
The e39 doesn't have it
@chrislagan4774
2 жыл бұрын
I have a 2012 116i that starts and drives for about 50 metres, then dies. Most times I can get it stared again after a couple of turns, and off it goes, and does not die again. But sometimes I can turn over for hours without it starting, then leave it for a couple of hours and return to find it starts on first turn. Any idea? My mechanic changed two fuel pumps and it did not help.
@ryanhopkins3568
2 жыл бұрын
This is exactly what I’m struggling with on my 116i too. You managed to have any fixes.
@chrislagan4774
2 жыл бұрын
@@ryanhopkins3568 Hi Ryan, yes finally got it fixed only to have it written over two weeks later in the Northern NSW floods. After changing 2 x $400 fuel pumps to no avail, I took to another mechanic and he knew before he even opened the bonnet. It is your Fuel Control Relay $50. Once changed the car run perfectly.
@samuelbernards7453
Жыл бұрын
Can I do it on X6 2008 diesel. Car takes time to start...but then when it starts,it goes off after 10 to 20 seconds
@Robertwinco
Жыл бұрын
@@chrislagan4774hello you have any part number? Or the location of that relay?
@samuelbernards7453
Жыл бұрын
Can I do this on an E71 diesel? Car starts then goes off after around 10 seconds
@alikhalifa8480
26 күн бұрын
2014 x5 v8, same issue
@slowjamexperience.1352
2 жыл бұрын
Good day sir, can this also work on a BMW F10. Mine has a problem of cutting out power when I'm coming to a stop. Every morning it starts perfectly but if I drive for an hour or so that's when I'm having issues..
@mwalimudubai1406
4 ай бұрын
Mine too does the same, once engine becomes hot.
@randycrittenden4753
Жыл бұрын
Hey this fixed my start and die after a few minutes it started backfiring thru the intake like poping or firecracker sound any info would be greatly appreciated thanks
@kristapsdaviskomarovs4709
Жыл бұрын
Did you put connectors back after you tought its fixed?
@randycrittenden4753
Жыл бұрын
No sir
@randycrittenden4753
Жыл бұрын
I have a bunch of random mis fire codes plus it claims 02 sensor connectors crossed lol must be back fuel injector I will try that next thanks for your help at least it will run and idle no just has mis fires caused by something else I done put all new coil packs and plugs mass air and map sensor and Dansi flaps in the intake but have a great day
@randycrittenden4753
Жыл бұрын
09 bmw 328i xdrive thanks
@randycrittenden4753
Жыл бұрын
Injector circuit no 1 was open replaced and car runs perfect now thanks for your help the bad eccentric motor was the real problem then a new set of injector runs perfect thanks again
@sherrodmurray3121
8 ай бұрын
Does the 528i have this?
@IanMackiewicz
4 ай бұрын
why does it do this? bmw e60 N62 for refrence
@darwinkabaittv
9 ай бұрын
Hi Sir my bmw 323i 2008 start and die but if you press gas pedal first dies start again press gas pedal and work but the acceleration ups and down Sir whats the problem for my car?
@BrokenE36
6 ай бұрын
Any fix??
@zacharyzawistowski5386
2 жыл бұрын
What is it called again this happens to my 2012 135i
@mohibullah9346
Жыл бұрын
So the sensor disconnected ?
@efyoupayme
4 жыл бұрын
I have a similar problem. My car turned off but womt start at all. I did this but it did not worked. I have a feeling.my fuel pump went bad
@kristapsdaviskomarovs4709
4 жыл бұрын
Denis Moreno turn your ignition on. Do hear fuel pump working?
@Sleythedon
2 жыл бұрын
Dont put the key in the ignition when you’re starting it just in case it dies, so you can start it back
@waviechong
4 жыл бұрын
Did you ever plug it back up or eventually buy a new one
@kristapsdaviskomarovs4709
4 жыл бұрын
Wavie Chong later i replaced the eccentric shaft sensor
@thandinxumalo3318
6 ай бұрын
I'm having the same problem with my x5 m sport
@memeseller1706
Жыл бұрын
Bruh lol this is just a temporary fix … this valvetronic system is complicated and what ur doing when turning that 4mm is the shaft inside under the valve cover it’s supposed to move both ways not just stay in one place it’s called variable valve timing for a reason .. this will not fix your problem .. if your car is having problems with this you will need a new valvetronic motor and possibly an eccentric shaft
@kristapsdaviskomarovs4709
Жыл бұрын
If car starts and dies like this then its only two reasons. Eccentric shaft sensor or vvt motor is dead. And valvetronic system is not complicated. Its verry simple
@dreamsmanifest3920
Жыл бұрын
What is the point of leaving in unplugged? What does it even do if it is plugged in?
@kristapsdaviskomarovs4709
Жыл бұрын
When you plug it back, then faulty eccentric shaft sensor is giving false readings to valvetronic motor. And then car engine stalls and can be damaged
@jaisanchez97
Жыл бұрын
I have a 2013 535 stage two fuel pump and charge pipe stock injectors and intercooler I’ve been having a problem car starts up perfectly but after use and getting warmed up when put in park car turns off and then to start it it cranks but turns off immediately and then starts up again once the temp goes all the way down please help 😢
@dreamsmanifest3920
Жыл бұрын
I have the same car same problem at night time when it is cool it drives better
2 жыл бұрын
does it work for bmw s740i 2011
@jorgepizarro3327
4 жыл бұрын
What year make and model was this BMW?
@kristapsdaviskomarovs4709
4 жыл бұрын
jorge pizarro 2006 E90
@godsglam2322
3 жыл бұрын
Why you unplug it and do yu keep it unplugged
@SIX-L
3 жыл бұрын
Mine is doing that now starts than dies 🤔 it's an E90 M3 2007, do you think this will work? Spark plugs have all been changed
@kristapsdaviskomarovs4709
3 жыл бұрын
Im not sure. M3 has a different engine.
@swiftyrpm1460
3 жыл бұрын
Amazing!
@roselruiz1479
4 жыл бұрын
This works on 2008 550i?
@martinndabezinhlendlovu9832
2 жыл бұрын
If the car starts mst u connect back the Vvt
@getmyswaggeron
Жыл бұрын
Holy fuck you fixed my shit bro thank you so much omg saved me a 150 dollar tow! Now I can drive it to the shop and reprogram my motor and finally enjoy my baby!!! 😍😍👍 Seriously if you have a Venmo HMU I'd like to send a couple of bucks your way!
@kristapsdaviskomarovs4709
Жыл бұрын
I’m good bro.😁 Better take some beers today😄
@samuelbernards7453
Жыл бұрын
I need help ,E71 diesel ,starts then goes off....how to solve it? It's diesel
@eliotness100
2 жыл бұрын
Can I plug the plug back in after procedure
@kristapsdaviskomarovs4709
2 жыл бұрын
No. Because your eccentric shaft sensor is broken. Replace sensor, learn valvetronic positions again with connecting car to computer, and you are back on track normaly. With unplugged connection you can drive as long as you want but i recomend to change that sensor as soon as possible.
@jameslimon3137
3 жыл бұрын
The most unreliable car ever bmw means broke my wallet
@TheBest-ut4vw
2 жыл бұрын
🤕🤣
@Ad__915
Жыл бұрын
Tf he’s talking about there gonna Be the next Honda’s
@Mr77Trojan
Жыл бұрын
Yeah, broke your wallet, not everyone’s
@nkosinathimkhize6203
2 жыл бұрын
My BMW 130i series starts and die, im going to try this and get back to you guys with the results. Pray with me 🙏🙏🙏🙏
@Timmad24
Жыл бұрын
Dd it work
@khopolomolibeli4375
8 ай бұрын
?
@beastmodeyt7816
5 ай бұрын
Went well ?
@tiagoguia4919
4 жыл бұрын
Can i do it on a 318i e90 2006
@cassyalfonso4970
4 жыл бұрын
whats the cause of this voltage supply EWS3 CONTROL MODULE NOT STARTING HOW CAN I FIX this problem is it the key? please can someone help
@ave9341
3 жыл бұрын
Assuming your car is no crank, no start, it’s possible the values in CAS and DME are out of sync. So your cas-dme may need an adjustment/re-sync, this is done through the obd2 port with programs like inpa, ISTA, or certain diagnostic readers ( don’t know which ones)
@greynand
4 жыл бұрын
does i work for z3 2000 ?
@vicelloo8463
4 жыл бұрын
Going to try this on mine. Having a similar problem. Car starts and dies. Then just cranks
@yukateco6855
4 жыл бұрын
did it work for you?
@Fendi303
3 жыл бұрын
What part is that? I have a e46 and it does the same thing
@Billbenman
Жыл бұрын
Buddy message me need your super advice with this problem
@Rich-r2c
6 күн бұрын
😘
@madformodz7252
9 ай бұрын
Bmw 3.0 e90 starts then dies flashing up loads of codes gearbox malfunction engine power reduction ext was okay woke up mext morning it wouldnt start cranked starts dies sny help please guys
@davidkelly4385
Жыл бұрын
Hi I have a 08 318d dies after starting egr is blanked and mapped out can any one help
@get2it495
3 жыл бұрын
Car stays on for 30 min then died goes into limp mode , reset and unplug battery and it start right up again weird... can y’all help
@joshuacatron2
2 жыл бұрын
Nice
@egilskuksa9913
2 жыл бұрын
I got e46 after it starts like 30sec after it turns off ,any ideas ? I need help 😅😅
@LCARDENAS09
Жыл бұрын
Same problem
@Navyblue0785
4 жыл бұрын
Before i try this, my car would start and hesitate for 10-15 sec then die. Now it starts clean then dies right away
@lilfaneto
4 жыл бұрын
dave M. have u figured the problem? mines doing this right now too
@Navyblue0785
4 жыл бұрын
@@lilfaneto i did.. changed all the spark plugs.. but now my car starts perfectly, but as soon as I put it in reverse, it dies
@Mairitta
4 жыл бұрын
lil faneto change the part he’s talking about
@30guarino
4 жыл бұрын
lil faneto any luck with your car?
@bobshmurda8100
4 жыл бұрын
dave M. Your crankshaft sensor habibi
@-joker-5149
4 жыл бұрын
i have same issue with e46 can someone help please??
@emilyq7991
4 жыл бұрын
do u leave it unplug
@kristapsdaviskomarovs4709
4 жыл бұрын
Emily Q yes.
@zinniyah-priscillaisrael6617
4 жыл бұрын
Kristaps Dāvis Komarovs i plug mines back in after it runs for awhile and I see if it would shuts off when I plug it back on and no it starts right back up on my 2008 BMW 328i
@samuelbernards7453
Жыл бұрын
@@zinniyah-priscillaisrael6617 is yours diesel engine?
@RichieRakas
3 жыл бұрын
Is your car petrol??
@kristapsdaviskomarovs4709
3 жыл бұрын
Yes sir. 🤝
@felixgranados2
4 жыл бұрын
What codes did you get ?
@kristapsdaviskomarovs4709
4 жыл бұрын
Felix Granados oh man, there was bunch of codes.
@guttakingwest4461
4 жыл бұрын
I have an 09 535i and it doesn't have this part .. took cover off and its not there...
@kristapsdaviskomarovs4709
4 жыл бұрын
GuttaKing West what engine you have? I have n52
@guttakingwest4461
4 жыл бұрын
24 valve straight 6 twin turbo 3.0
@kristapsdaviskomarovs4709
4 жыл бұрын
What model do you have?? F(number) ?and how much kw?
Пікірлер: 210