My Gladiator came with the cover. Ironically, I watched this video to verify removing the cover would be simple to install a Bestop for Truck2 cover. Thanks for the video. And my cover has been great for 3 and a half years. Through car washes and all.
@jwbronco74
4 жыл бұрын
Just a little tidbit which you may have figured out already: when closing, if you leave the tail part flipped up until you latch the cover down, latching both sides takes much less effort. Once latched, then flip the last part down. I can get both of my latches to catch at the same time this way.
@ThatTimGuy
4 жыл бұрын
Excellent! Thank you!
@plumber802
Жыл бұрын
That tonneau cover is now $863 at the link you provided...OUCH!!! I really wanted one of these but I'm not sure if it's worth that kind of $$$.
@MM-fv9hm
2 жыл бұрын
Very helpful video and follow up. Helped me decide to try this top.
@VoiceReason
2 ай бұрын
Thank you for making the video!
@arcadesunday4592
4 жыл бұрын
Ah, something different from Arcade repairs, etc. Very cool. Nice truck BTW. Nice little mod there too!
@ThatTimGuy
4 жыл бұрын
Thanks!
@brianalberts3665
3 жыл бұрын
Thank you for this! Helpful. Looks sharp.
@montiz333
3 жыл бұрын
This came out nice. Definitely getting one.
@ThatTimGuy
2 жыл бұрын
Had it for about a year now, still going well.
@onebridge7231
4 жыл бұрын
Great install video!
@ThatTimGuy
3 жыл бұрын
Thanks! 👍
@g.g.8344
3 жыл бұрын
Thank you! Sure was helpful. Will be ordering mine.
@Jtmojave
3 жыл бұрын
Nice video .. its been some time since the install ... Thoughts/Complaints on quality?
@ThatTimGuy
3 жыл бұрын
The top material has held up well through the first New England winter. No signs of fading at the moment I'm curious to see if the latch mechanism is reacting with the metal bar it clamps onto though. I'm not sure if it's just a mineral build up from moisture or not. I haven't tried to clean it yet. The top also seals well and I haven't had any issues with water getting in. The material has stretched a tiny bit and will create puddles of water on the cover. In the winter this can turn into sheets of ice that are more difficult to remove. Overall, I like it so far. I'm curious as to how the aftermarket third party options are holding up. I like this one over the hard cover because I can still see out the rear window vs the trip fold model with it folded up.
@Jtmojave
3 жыл бұрын
@@ThatTimGuy Thank you 🍻
@alexanderdeburdegala4609
3 жыл бұрын
Thanks for the video. it helped my out
@jkelley8173
2 жыл бұрын
Man just get the Tri fold from Tyger you ain't got to do none of that ✌🏾
@dantefontana
2 жыл бұрын
Does anyone know what part number is and if will fir a 2022 JT
@extspence
3 жыл бұрын
Something of a warning for people watching this and thinking they can easily install the cover. Just got mine, went through the instructions and checked my bed. The front hols are missing the nuts. They are just open holes.
@ThatTimGuy
3 жыл бұрын
Mine wasn't missing any pieces and the bed had threaded holes where things needed to go. *Ideally* it's just plug and play.
@ChowDaah
3 жыл бұрын
Mine were missing. May have to get that nutcert tool.
@AMRAP
3 жыл бұрын
Had the same issue - 21's don't seem to have threads at the front of the bulkhead.
@rainmanx9114
3 жыл бұрын
Any jt built after 7/20 will have no threaded holes
@billredding2000
3 жыл бұрын
@@rainmanx9114 My 2021 Gladiator (built 9-20) DOES have threaded holes: Some in the front of the bed on the top part (where Jeep's OEM Trail Rails attach) and the top sides of the bed in the front and rear. IIRC, they're mostly (if not all) 6mmx1.0 (aka: 6M) sized hex-bolts. I used them to mount the 4 Undercover Ultra Flex bed-cover/rail brackets to so I could mount the rails to the brackets, and all 4 brackets DO use holes at are there and already-threaded for their 6M bolts. [The 2 front brackets use the only threaded hole there and a tab on the bracket goes into an unthreaded hole, and the 2 rear brackets use the 2 threaded holes there] Yes, there ALSO are "just holes" near the threaded ones with no threads, but I'm just saying there also ARE holes that are threaded in the Gladiator's bed and they're sued for mounting rails. -- BR
@kalebdaubert
4 жыл бұрын
Tim, at the end you mentioned a coating you would put on the cover to make it even more water resistant, what is that coating?
@ThatTimGuy
4 жыл бұрын
Great question! The product I use is called RaggTopp - wolfsteins.com/
@petervachon6989
4 жыл бұрын
How deep is your bed and do you have any tie-down locations inside to secure your load even with the gate dropped down?
@ThatTimGuy
4 жыл бұрын
17-3/4" deep and there are 4 factory tie down rings in the corners of the bed.
@petervachon6989
4 жыл бұрын
@@ThatTimGuy My bad, I meant the depth as to mean how long is the bed?
@SocietyFailing
3 жыл бұрын
@@petervachon6989 5'
@joshuabrewer2549
3 жыл бұрын
Very Helpful Thank you!
@Arcadehollywood
4 жыл бұрын
Tim love this!!!!
@ThatTimGuy
4 жыл бұрын
I had to get a truck to help get games 😳😁
@davidrofa4875
2 жыл бұрын
Hey dose this fit 2022 gladiator and how much was this
@gvsukids
4 жыл бұрын
only need to undo one side, it unlatches both sides. when rolled up against the front of the bed, how do the straps lay against the underside of the cover?
@ThatTimGuy
4 жыл бұрын
You are right about the latch! I didn't realize that when I installed it. What straps are you talking about? The ones that keep it rolled up? There is velco on the straps that keep it rolled up.
@AnointedOne4God
3 жыл бұрын
How much was the cover? With all the parts
@gavinledbetter8386
3 жыл бұрын
They have 3 different options soft roll up is 595 then soft tri fold one is 625 then hard tri fold one is 995
@shmohsin-lasvegas
3 жыл бұрын
Any idea on the weight of the cover? Under 30 lb? Also, did you notice any difference in gas mileage?
@ThatTimGuy
3 жыл бұрын
Good question. I don't know the weight off the top of my head. It's not super heavy. As far as gas mileage goes, I drive pretty conservatively and average about 21-24mpg. The cover has been on pretty early on into ownership of the truck. So I can't comment on if it's a gain or loss, but if you go back to the old Mythbusters episode about trucks and mpg, I think bed covers made it slightly worse.
@shmohsin-lasvegas
3 жыл бұрын
@@ThatTimGuy Thank you
@gavinledbetter8386
3 жыл бұрын
How well does it keep stuff dry?
@ThatTimGuy
3 жыл бұрын
Keeps things pretty dry. The truck stays outside through snow and rain. Any water that has come in so far was when I opened the tailgate.
Пікірлер: 49