This was so helpful, I watched a million other videos that did not apply to my car lol
@Xander72r
Жыл бұрын
Thank you, had to watch 5 other videos of people not explaining it the right way had me frustrated for a minute
@MrJohnDoe09
Жыл бұрын
You're welcome, I'm glad it helped you.
@stevengonzales1535
8 ай бұрын
Amazing Super Easy! Been looking forever for this reset
@bryanwade9834
Жыл бұрын
Dude I saw u shaking I was like what... Then when I tried it I did the same thing. Good work on the video. It was extremely helpful.......
@edbaer7309
5 ай бұрын
Ty. Only video that worked for me (for 2020 GLC 300 4matic). Had to try a few times but it finally worked. Tyvm!!!
@Ma_Me0784
4 ай бұрын
Same
@jestimator
3 ай бұрын
Doesn't work for me. One click, trip menu, hold backwards and home button, then just goes to trip info after 25 seconds. 0:32 this doesn't allow my video to show you
@ddacombe4752
3 жыл бұрын
Thanks, just got a 2021 GLC 300 and my Autel DS808 doesnt recognize the new model so good to know the new combo to access this menu.
@MrJohnDoe09
3 жыл бұрын
Happy to help.
@michellebouchard4358
3 жыл бұрын
Thank you SO much!
@zaynesworld1680
4 жыл бұрын
Thank you worked great
@ogz8252
2 жыл бұрын
Can you make a video for air filter replacement? I tried but couldn’t remove airbox cap
@texasbornandraised6605
3 жыл бұрын
Thank you very very very much
@StartVisit
3 жыл бұрын
most important start with Trip icon and then inside option one (actual trip) should be selected, there are 6 options.
@MaverickWall238
Ай бұрын
THANK YOU SO MUCH
@LEVUCARCHANNEL
4 жыл бұрын
Cách xoá đèn báo dầu xe glc 300 đời 2020 rất nhanh ,thank you!
@timurkaziyev265
2 жыл бұрын
Thank you!!!
@FickeyH
10 ай бұрын
Well done
@olumidefire
2 ай бұрын
THANKS so much 🙏
@MrJohnDoe09
2 ай бұрын
You're welcome
@jpkrause
11 ай бұрын
Thank you!
@andrewcalvet3038
4 ай бұрын
I replaced my brakes, but the lights for the brakes hasn’t shut off. I can’t turn it off with the e-brake switch. I can drive the car though. Do you know how to remove the light?
@juang.7255
10 ай бұрын
You’re the boss!
@MrJohnDoe09
10 ай бұрын
Happy to help
@harveyottotech
Жыл бұрын
Thanks, good vid.
@MrJohnDoe09
Жыл бұрын
You're welcome.
@arkan-2832
2 жыл бұрын
Thank you 🙏
@MrJohnDoe09
2 жыл бұрын
You're welcome
@babyboyge
10 ай бұрын
Thank you and all the comments
@furry_disease7008
4 жыл бұрын
You should specify that you need to be holding both buttons when you press the square
@MrJohnDoe09
3 жыл бұрын
I forgot to mention it in the video, however I did mention that in a comment to prewittj1 over two months ago.
@nipex69
6 ай бұрын
THANK YOU
@RedsVolkswagenRepair
3 ай бұрын
Exactly. Only reason I figured it out is because of this comment.
@nipex69
6 ай бұрын
Thank you
@timc.437
4 жыл бұрын
It is holding “back” button, the press the touch button(aka the square button)
@MrJohnDoe09
4 жыл бұрын
Hold the back and home buttons simultaneously then press the square.
@af8368
3 жыл бұрын
Great tip, thank you. By any chance, do you know how to reset an adaptive transmission on 2020 GLC300?
@MrJohnDoe09
3 жыл бұрын
No sorry I don't.
@thein1997
Жыл бұрын
Thanks boss
@prewittj1
4 жыл бұрын
Did you press the square “select” button while still holding down the back and home buttons or had you just released them? Didn’t work on my 2020 GLE.
@MrJohnDoe09
4 жыл бұрын
I pressed and released the square button while still holding down the back and home buttons. After the menu appeared, I released both buttons which is why the workshop menu appeared, but all you have to do is click on the square button to get to the assyst plus.
@prewittj1
4 жыл бұрын
MJD09 all that did was prompt me to reset the trip odometer.
@MrJohnDoe09
4 жыл бұрын
Does your vehicle have the home and back buttons on both sides of the steering wheel?
@prewittj1
4 жыл бұрын
It does and I am pressing the buttons on the left side.
@MrJohnDoe09
4 жыл бұрын
Before you pressed any buttons, was the trip menu displayed on the dash?
@viscom1765
4 жыл бұрын
Is your door opened during this procedure?
@MrJohnDoe09
4 жыл бұрын
No it's closed. I forgot to say after opening the driver door to make sure the car is completely off, then close the door again.
@judinuest9059
2 жыл бұрын
My 2020 GLC300 controls are different. The cruise on/off is to the right of the square pad. Can't get this to work. Any suggestions?
@MrJohnDoe09
2 жыл бұрын
Try using the method from this video, kzitem.info/news/bejne/tKOOtWGjrWmhano
@judinuest9059
2 жыл бұрын
@@MrJohnDoe09 Thanks for the reply, but I don't have a workshop menu/square. However, the 5 second thing combined with a couple of other videos did finally get it reset. Not sure exactly what I did...but it didn't involve standing on 1 leg with my arm over my head and a full moon ;-)
@MrJohnDoe09
2 жыл бұрын
@@judinuest9059 well that's good I'm glad you were able to get it reset. :-)
@judinuest9059
2 жыл бұрын
@@MrJohnDoe09 Me, too. Been trying on & off for almost 2 months....
@MrJohnDoe09
2 жыл бұрын
@@judinuest9059 oh okay I'm sure that was frustrating to see on your dash for that long.
@viscom1765
4 жыл бұрын
In my model I have to buy service switch for the pad in order to reset it.
@viscom1765
4 жыл бұрын
But MB didn’t sell it.Workshop get it from somewhere.
@wh9771
3 жыл бұрын
How to find oil grade number ? My is 2019 c300~
@MrJohnDoe09
3 жыл бұрын
It could be in your owner's manual. If it's not, depending on your location if this brand is available, you can use this reference. Mobil 1 ESP 0W-30 and Mobil 1 ESP 5W-30 advanced full synthetic motor oils approved against Mercedes-Benz specs 229.31, 229.51 and 229.52. Mobil 1 FS 0W-40, Mobil 1 FS 5W-40 and Mobil 1 FS 5W-50 advanced full synthetic motor oils approved against Mercedes-Benz specs 229.3 and 229.5.
@thachann4884
Жыл бұрын
Do you push it all together
@MrJohnDoe09
Жыл бұрын
You will hold down the back arrow button and the home button down and while holding them down you will press the square button in the middle.
@karoollos
3 ай бұрын
My Mercedes the same but is not working :(
@anthonygonzalez2669
3 жыл бұрын
Gracias
@MrJohnDoe09
3 жыл бұрын
De nada
@muhanadk2910
5 ай бұрын
How did you go to full service!! You didn’t explain what to push man
@MrJohnDoe09
5 ай бұрын
In the video, I said to use the square button and swipe down to get to full service. Then you will press that same square button when you have full service highlighted.
@cliffisaac29
3 жыл бұрын
How do you go to trip there is no scroll button.
@MrJohnDoe09
3 жыл бұрын
You use the square button I mentioned. It's like using a capacitive button on a phone, you can swipe left, right, up, and down with it.
@StartVisit
3 жыл бұрын
wow why is so much hassle? unbelievable
@MrJohnDoe09
3 жыл бұрын
It's likely because they want you to only get things taken care at the dealer.
@StartVisit
3 жыл бұрын
@@MrJohnDoe09 Im voting YES Right to Repair November 7
@leelaasokan
10 ай бұрын
@@MrJohnDoe09was gonna say same. If they made it easy, they wouldnt have as many returning customers paying all the inflated fees beyond the car sales.
@footprint_594
4 жыл бұрын
Some GLC300 models work with the instructions in this video kzitem.info/news/bejne/tKOOtWGjrWmhano .
Пікірлер: 89