I just went to Nissan dealership with the same problem and they're charging me $1,067 for that grill shutter and you're right, it should be in recall. So, now I watched your video and I'll be able to replace that myself. Thanks for showing us how to DIY.
@dluxehair1706
Жыл бұрын
Mine keeps going off and on. It's been off for over two weeks now. I'm not paying 1k+ for a part that doesn't affect the functionality of the vehicle. I'm still getting great gas milage and no overheating. Nissan tried it with this foolery
@umeraziz831
Жыл бұрын
@@dluxehair1706 That is what I did at first, was driving with the shutter failing for so long because it had minimal impact, but because I live in the state of Georgia, we have emissions every year and I forgot I would fail emissions with my car like this so I ended up doing it myself cuz of this video thank god
@Bones876
Жыл бұрын
I'm gonna try and do this with a friend as dealership is charging wayyy to much for this simple part man
@umeraziz831
Жыл бұрын
Hey man, thank you so much for the video. I had this exact issue and the dealer was going to charge me almost $900. Was able to get an OEM part for about $160 online and was able to install it myself and my check engine light is finally gone so I am incredibly grateful. For anyone else who is planning on doing it themselves, my advice is to get the proper pry tool because removing the pins took me the longest time. You can also use a strong fork and get pliers to make it wider (its what I had to lmao). You may also want to get extra pins because they do break easily. Other than that the installation is very straightforward. Thanks again Usman and good luck to anyone else that does this
@barbaraholland1639
Жыл бұрын
Hey, could you please give me the site on where you found your 2019 Nissan Altima OEM part for check engine code p159f/p059f? Nissan is trying to charge me $190 for the diagnostic alone. I'm afraid about the part price, labor, and anything else that "may pop up"....
@sf7297
10 ай бұрын
@umeraziz831 did you have to do a initialization procedure after installing the new one? I'm currently trying to get rid of code U0284 on my nissan altima
@umeraziz831
10 ай бұрын
@@sf7297sorry for the late reply man I just saw this. No I did not. After a few minutes of driving the light was gone
@umeraziz831
10 ай бұрын
@@barbaraholland1639hey man, sorry I didn’t see this. If u haven’t already, I’d suggest searching for the oem part but buy from another Nissan parts store in the country. At the time a Nissan dealer was selling it me for $150 rather than $250 my local dealer offered. It got here in two days so not long of a wait at all. I ordered mine from Hart Nissan. Check them out!
@sf7297
9 ай бұрын
@umeraziz831 thank you so much! Going to order the part today.👍🏾
@dinodino6907
2 жыл бұрын
i have 2016 and yesterday got check engine light on,and i go to auto zone i find out this problem.Ty.for video,now i know how to replace this.👍
@dluxehair1706
Жыл бұрын
I'm ready to file the much needed lawsuit. I own a 2019 just at 40K miles and I'm having this same issue. Part is only available at dealership for $231
@asalogan8131
Жыл бұрын
Start a petition, I’m sure we’ll all join in.
@dewaba1
Жыл бұрын
2020 with 11,000 miles, replacing this weekend.
@dluxehair1706
Жыл бұрын
@@asalogan8131 I filed a complaint with Nissan Manufacturer but didn't get a positive response. It's my guess not enough folks are complaining.
@ronettelavarias1914
Жыл бұрын
Same thing here, I have a 2019 and hardly drive it, just has 16,000 miles on it and the battery is exhausted already and that grill shutter.
@blakatang
Жыл бұрын
I have a 2016 and the only place that had the shutter assembly part near me was the dealership. Just paid 232 in NC. It feels real “scammy“what Nissan is doing to us!
@wesmoore2403
3 жыл бұрын
thanks same issue w my 2020, not good nissan, ty for video
@JJ-nw7vj
2 ай бұрын
So i replaced my "AGS", i deleted the check engine, the scanner is just blinking red on and off for "(Fuel, Evap, 025, EGR" ) when i turned the car on it also did a sweep. The P059F code went away yet the other keep blinking. I know they have to do with emissions. Do i have to drive the vehicle until it relearns everything so it can get ready for emissions? And do the shutter recalibrate themselves?
@stephanieholt1545
Жыл бұрын
I had a rodent eat thru part of the wiring harness.. do you think it’s feasible to fix or would the entire harness need to be replaced? Or is there a section of the harness that can be replaced.
@Usmanthemecano
Жыл бұрын
I'm not sure how that harness runs. But it would probably be easier just to fix a couple of wires then replacing an entire harness
@Anonymous-ji4sb
9 ай бұрын
Did you figure it out? I’m in the same position. My car just tripped the active grill shutter code. My neighbors have been having issues with wires getting chewed by rodents so I have a feeling that’s the problem.
@Bones876
Жыл бұрын
buddy of mine is willing to give this a try i just have to buy the parts any further advice after putting this part in was there an extra step is this plug n go
@Usmanthemecano
Жыл бұрын
Plug and play. You may remove the battery negative during the repair and reconnect after it
@sf7297
9 ай бұрын
I had a u0284 code on my 2019 Nissan altima, decided to change my active grille shutter and now....... same issue, I have no idea what to do at this point. Ive tried testing the alternator and battery which are in good condition. Any suggestions for a next step?
@Usmanthemecano
9 ай бұрын
I dont have the schematic in front of me at this time but I would check power(s) and ground(s) at the module. If all good then see the data line(s) if all good then new part is defective
@mosswhite9806
2 жыл бұрын
SKIP TO 7:24.
@likenl4508
11 ай бұрын
Once replacing the shutters, do we have to reprogram anything??
@Usmanthemecano
11 ай бұрын
Nope. Plug and play
@likenl4508
11 ай бұрын
@@Usmanthemecanothank you!
@verbalfist
2 жыл бұрын
I had the same issue with my 19. Luckily I was still under warranty so the dealership took care of it. I’m regretting not getting the extended warranty because so far I had to take it in for the erratic volume on the radio, rear door locks not working, and the grille shutter. I got a feeling more issues will come up
@novelgamingx6974
2 жыл бұрын
Literally everything you’re saying is happening to my Nissan. But I’m completely out of warranty
@jakejones5736
2 жыл бұрын
I also have a 19 Altima. Some time back, I took it in for the exact same thing, erratic radio volume adjustment. Probably a thing, huh? They said they did something with the software, and it worked fine. At least it was under warranty; but not now. Recently, it has begun doing the same thing. Also, I'm here because I got the P059F code. So I have a service appointment this weekend. Today, I removed the bottom cover to gain access to the electrical connector. When I inspected it, everything looks to be in perfect order (no damage). The pins and female side look shiny new! Although the light has been coming on & off, it still has the code. Right now it's off. So I will give it a couple days of drive cycles to see if messing with the connector will resolve the issue. If not, guess I will keep the appointment. UPDATE (3 weeks later): So far, there are NO CODES! Hopefully, reconnecting it resolved the issue. Time will tell...
@carlostapia5417
2 жыл бұрын
For sure
@jakejones5736
2 жыл бұрын
@@carlostapia5417 Saw your message, so I will just reply to it for everyone to read. For what it's worth, I used compressed air into the volume knob and also spun it around both ways several times. I have used this technique on other dials and it works! So I only got the oil change at the dealer. Also, STILL there are no codes! :)
@eazzyyy1
2 жыл бұрын
My Nissan is a 19 and I’m having the exact same issues kind of hilarious to be honest
@beautywshay9752
2 жыл бұрын
Yup same thing for my Nissan but imma try to do it myself
@beautywshay9752
2 жыл бұрын
I have a 2019
@carlostapia5417
2 жыл бұрын
Why it keeps happening again I have a 2016 nissan altima with a lot of mistakes and errors codes I wish I would have known this before I bought it 😢
@Usmanthemecano
2 жыл бұрын
It should be a recall...too many ppl reported this failing item
@elvo6217
Жыл бұрын
did that come with the motor ?
@Usmanthemecano
Жыл бұрын
Of course
@katricepitts6590
2 жыл бұрын
Ughhh mine just happened yesterday. Now I have to pay for a 2019.
@DJ-tn7vj
3 жыл бұрын
Buy a new scan tool, I'm rocking the Think tool master/Pro. It don't make any sense updating your tool. Autel discontinue it but still sells the updates. Just got off the jack with an Autel rep a few days ago.Costing like 700 bucks for the update plus I have to ship it for them to repair the screen and they discountine the Maxisys 905BT. So I said, I'm just getting a new one.
@Usmanthemecano
3 жыл бұрын
I've already updated at a discounted price. But I will get the thinktool next
@ChantellysSweetWorld
2 жыл бұрын
What problems does the active grill shutter cause? My car is stalling at lights and a little jerking. The only code that comes up is for the active grill shutter to be replaced. Please help!
@Usmanthemecano
2 жыл бұрын
Active grille will not cause jerking or stalling. You may have an ignition problem (spark plugs or coil issue)
@ChantellysSweetWorld
2 жыл бұрын
@@Usmanthemecano thank you so so much, you don’t know how much you’ve just saved me!
@Tdot99
Жыл бұрын
I’m currently experiencing the same things.. little jerking on acceleration etc.. engine light is on. What’s the update on your car 1 year later ?
@ChantellysSweetWorld
11 ай бұрын
@@Tdot99 do you have a Nissan?
@Tdot99
11 ай бұрын
@@ChantellysSweetWorld yes 19’ Altima sv
@Slimdaddi429
Жыл бұрын
How do u remove the connector? It's on there tight
@Usmanthemecano
Жыл бұрын
Manpower 😆
@edenc.m4576
3 жыл бұрын
i have the same issue for my 2019
@Kimaru98
3 жыл бұрын
Can I fix this issue myself ?
@Usmanthemecano
3 жыл бұрын
Most definitely. Not a complex repair at all
@queenshelby7016
Жыл бұрын
I have the same issue with my 2019 nissan Altima...
@bryanfuentes2981
2 жыл бұрын
Did the engine light came off ?
@Usmanthemecano
2 жыл бұрын
Yes
@dvasquez2530
2 жыл бұрын
When u change the air shutter the engine light came off automatically??? I need to fix my Altima
@Usmanthemecano
2 жыл бұрын
You have to delete it either by disconnecting battery or using a scan tool
@jakejones5736
2 жыл бұрын
@@Usmanthemecano Problem with deleting it is if the issue is not resolved, the code will return. This is why after I do any code related repair, I simply leave the light on or the pending code in memory. After a few drive cycles the code/light will go away on its own proving it has been repaired.
@Usmanthemecano
2 жыл бұрын
Whatever you want...
@papabits5721
Жыл бұрын
Why the crappy overlay on screen? It ruins a perfectly good video
@jamtesfaye7548
11 ай бұрын
Nissan is not good car I have got this problem
@MRMS12
3 жыл бұрын
Bruh nice work but horrible camera views , might as well not do it if it's not done right lol
@Usmanthemecano
3 жыл бұрын
This is not rocket science bruh ...
@jakejones5736
2 жыл бұрын
Perhaps a better way to put it is something like this: "It was a little difficult to catch everything due to the camera angles, but thanks a whole lot for taking the time to demonstrate how to replace it". Just sayin'.
Пікірлер: 88