Is their a second video showing the truck complete?
@logankollatt2857
Жыл бұрын
This video should get more views I plan on installing one myself just want to make sure if I can use a floor jack
@GeneralOrhan
2 жыл бұрын
Looks like a great kit if you want a great stance on pavement.
@DMoneyGarage
2 жыл бұрын
I just install what the customer asks for as long as it doesn’t involve hacking or would be unsafe when complete. I think it would rub with any kind of articulation.
@russtew1
2 жыл бұрын
So where's the follow-up video of what the finished product look like?
@MegaDestroyer5656
Жыл бұрын
Thinking of the same kit, how much does an installation like this typically cost?
@ewowen
Жыл бұрын
At 45 seconds you say the first think you do is disconnect the electric something... What do I need to disconnect?
@joelmurillojr3915
2 жыл бұрын
Where is the after video?
@DMoneyGarage
2 жыл бұрын
If it comes in for some other work I’ll get a video. Ran into some wheel fitment issues and spent time on that and once it was done the customer showed up. Or I may see if the customer wants to give a review and I’ll get some video and a walk around. Subscribe and I’ll see what I can do.
@bdbbdb9691
2 жыл бұрын
@@DMoneyGarage wht issue
@DMoneyGarage
2 жыл бұрын
@@bdbbdb9691 he went with 18” wheels from 20” wheels and the stick on weights were rubbing the calipers.
@bdbbdb9691
2 жыл бұрын
@@DMoneyGarage you sir just earned my subscription t.y.
@NoSend901
Жыл бұрын
I just bought a 23 ram BTS edition, it's got the offroad coils and 20 wheels, if I run this exact kit would 35x12.50x20 tire fit?
@pboperations
Жыл бұрын
What does he disconnect at 0:50? The 'electro crack?' Que!
@rocoroco5749
Жыл бұрын
Aren't those the same front struts N3 THAT DO THE LEVEL KIT how does it get 3.50 inch of lift
@billking3501
2 жыл бұрын
WHY NOT JUST DISCONECT THE HOT WIRE ONTHE TRUCK BATTERY,INSTEAD OF GOING AFTER ALL THOSE CLIPS UNDERNEATH.?
@DMoneyGarage
2 жыл бұрын
The directions from rough country has you do it this way and I’m a stickler for keeping all the customers settings and such so if I can avoid killing power to everything I will. I’ve had people tell me they don’t disconnect anything but with pricing and availability of parts I wouldn’t take the chance.
@rocoroco5749
14 күн бұрын
Should of got M1 STRIT YHOSE N3 SUCK BAD
@Tdub66
Жыл бұрын
Link to that exact kit, please
@michaelcazarez3295
8 ай бұрын
I have this kit and I’m having trouble with the sway bar links not reaching the Lca fully. Any tips I’m gonna finish the lift tomorrow and put the truck on its weight hoping it can push the link into the lca all the way
@DMoneyGarage
8 ай бұрын
I’ve had to loosen the bar brackets on some lifts so the bar will move then once the truck is on the ground go under the tighten the bar back up.
@ThatGuy_Pal
2 жыл бұрын
i have a 19 ram rebel with the bilstein 4600’s. thinking about this kit instead of putting motofab spacers. how do you think these struts and shocks compare to the bilstein 4600’s?
@stevenhumphrey8203
2 жыл бұрын
What tire size did you go with?
@kirkdunn1379
2 жыл бұрын
what about the CV shafts?.....3.5 inches is a bit much for the front diff
@DMoneyGarage
2 жыл бұрын
I’ve done several of these lifts on various trucks and have yet to see any issues with the axles and have not had any after the fact hurt a cv axle. There are companies that make cv shafts for lifts if your worried about it but they are expensive
@antonioperez-el7vt
2 жыл бұрын
What size tire and wheels?
@WhosHaydes
2 жыл бұрын
Any follow up video coming?
@DMoneyGarage
2 жыл бұрын
Possibly. Just had surgery so I’m out for a bit. Lol
@jameswilliams5015
2 жыл бұрын
Just curious on were your located. I ask because if I order one of these kits I wanted to have you install it
@DMoneyGarage
2 жыл бұрын
Just south of Fort Wayne Indiana
@markbauer9393
2 жыл бұрын
U made that lower strut bolt look easy to get back in, it's a pain working off jack stands
@DMoneyGarage
2 жыл бұрын
It took a long time to get to the point I could have a place plus a lift. But glad you got it!!
@hcshorty10
2 жыл бұрын
FYI, rough country struts do NOT fit the v6 ram 1500s. They don’t make any that are made for a v6 4x4, can anyone recommend some?
@DMoneyGarage
2 жыл бұрын
Thanks for mentioning that. I haven’t had someone with a v6 wanting one installed. Thanks for commenting!
@hcshorty10
2 жыл бұрын
I have the v6 etorque model, funny how most websites don't state that. A pain finding struts, since I don't just want spacers, want to go all out
@DMoneyGarage
2 жыл бұрын
@@hcshorty10 I’ll make a couple calls and see if any of my suppliers know of anyone that makes them.
@aceofhearts4265
2 жыл бұрын
Would this kit fit the RWD?
@DMoneyGarage
2 жыл бұрын
Yes. The kit is for 2wd and 4wd.
@stevenhumphrey8203
2 жыл бұрын
What tire size did you go with?
@DMoneyGarage
2 жыл бұрын
He supplied the wheels and tires mounted. But they were 35 10.5x18. I would strongly recommend not getting 18” wheels for these trucks. The place that balanced them used some very skinny stick on weights and still were rubbing on the brake calipers.
@stevenhumphrey8203
2 жыл бұрын
So 35’s fit with no rub? I’m going with 20’s.
@DMoneyGarage
2 жыл бұрын
@@stevenhumphrey8203 on the rear side on full lock there was a touch of rubbing. He wasn’t worried about it since you couldn’t see it without actually looking for it.
@mrykerruiz
Жыл бұрын
@@DMoneyGarage Interesting. My 20211500 Laramie off road came stock with 18" Ram wheels.
Пікірлер: 43