Thats not a service. Its an oil change. Big difference. Retorqing? Lube brake/clutch piviots ect ect. Just saying.
@richardedwin5980
8 ай бұрын
Give him a break, he’s learning.
@twolrbuffalosoldier5514
9 ай бұрын
Pro tip, remove your primary cover first, before draining.
@richardedwin5980
8 ай бұрын
Just some more friendly tech tips…after removing your drain plugs use a small metal brush and clean the threads. Spray the threads with brake cleaner and dry. Apply light coat of oil to o-ring and install on drain plug. Then lightly coat the threads with thread sealant being careful not to get the sealant on anything but the threads. Reinstall and torque 14-21ft lbs. Do this for ALL 3 drain plugs. You’ll never get a leak this way. I’ve NEVER had one come back with a leak. You did right with the oil filter but let it sit for about 15-20mins to let the oil absorb into the filter element. Install filter finger tight plus a 1/2 turn. Invest in a strap wrench too for stubborn filter removals when the other filter wrench slips. Next, get a primary fluid funnel. Should use about 30oz of primary fluid if wet. Fill to bottom of clutch basket. And change your derby cover gasket. If you don’t you risk a leak. I do it EVERY 5K miles. The little bit of $$$ is worth the peace of mind. As for the transmission I use the HD 80W-140 synthetic gear oil. Mobil 1 also makes a great gear oil. Depending upon wear you live with temperature ranges you might use something lighter in colder climates and something heavier in much warmer climates. One other tip is to always replace the transmission dipstick o-ring too. The newer bikes come with a black plastic type of dipstick that sucks and is a bitch to thread back into the case. I invested in the old metal style one and threw the other in the garbage. Keep wrenching.
@dougm7737
2 жыл бұрын
Quick tip before removing oil filter, take a nail or Philips head and puncture a hole in bottom of filter. Will reduce oil spilling out on motor and frame when you unseat it! I have the harley oil filter draining tray, worth every penny!!
@gotchu99
Жыл бұрын
This should be titled 3 hole oil change. 10k service is more than just an oil chanege.
@gorion70
2 жыл бұрын
The harley drainer oil thing is totally worth it.
@davidjoiner6746
6 ай бұрын
It's a T27 on the derby cover not a T25. You will stip your bolts if you use a T25.
@harryhowell5644
Жыл бұрын
It's so easy to do, just takes a little time. Big savings from taking it in to the dealership. Plus they take your bike for a joy ride afterwards.
@danieljarvis5137
2 жыл бұрын
Definitely came here to see the belt tightening and cable lubricating points… disappointed
@zechariahdorado3465
3 жыл бұрын
So what do they do for a 10K service? Anything else besides the oil change?
Пікірлер: 12