I’m happy to see you figuring it out as you go. That’s exactly how I work on my bike - by fumbling along until I get everything to work 😝
@BillyBob-qu3kc
3 жыл бұрын
Very well done. Thank you very much for your videos, and explaining the steps, tools, and torque levels. I greatly appreciate it.
@bobv7657
3 жыл бұрын
Just one comment...."BE the exhaust" Come on Bill, you know you want to install it, just do it...Let's hear that beast ROAR!!! 😎
@DearMajesty
2 жыл бұрын
I came here for one reason. To find the axle nut size lol and it's 26mm, not 25mm
@lukotoystv
3 жыл бұрын
Took one for the team again Bill. It’s very informational video too bro. Don’t sweat it.
@lukotoystv
3 жыл бұрын
I love bikes too. But currently I don’t have one due the current situation but hopefully when this is over I can buy a bike. Watching your videos and see your love for bikes, your commitment and your compassion makes me inspired as well.
@eduardobernal453
3 жыл бұрын
Hi Bill, hey you live you learn and sometimes it works out. Look forward to the next video.
@kalheer
3 жыл бұрын
Moving fast on this Bike Bill 👏👏
@aeror115
3 жыл бұрын
Great machine! The 660 looks nice
@sfantulalexandru6054
3 жыл бұрын
Hi Bill! I look forward to seeing your next mods, especially the exhaust. Would be cool to see a video about the engine heat in traffic situations, because in Europe is now really cold and nobody did a video about this, and another one about the headlights in the dark. Thanks!
@matthewanthony769
3 жыл бұрын
Looks good! Dang would have like to see the front sprocket work and see how that changed the ride
@daveo9844
3 жыл бұрын
Thanks for the vid mate 👍🏼
@DIDDirtStarNorthAmerica
3 жыл бұрын
Killer combo!!
@MikeMaxin
3 жыл бұрын
Hey Bill, HSBK has the front sprocket your looking for. Chain and rear sprocket look great!
@2016KawasakiH2
2 жыл бұрын
Hey Bill, thanks for the video but fyi you owe me $17 cause I bought a 12 and 6 point 25mm sockets for the rear axle nut and neither of them fit....has to be 26mm...going -1/+2..
@Daspied
3 жыл бұрын
Looks great! I'm wondering if you can swap some of the high performance engine aftermarket parts from the rsv4 into the bike. The biggest limiter on any bike now is of course the locked ecu. Maybe we will get a cracked one soon!
@cristianhenao2025
Жыл бұрын
Hi! Can you please send the reference of the products? Both the chain and the sprocket, it would be easy to find them to buy them! Thanks!
@thatgsxr1000
3 жыл бұрын
Hi Bill, please can you put a link to the 520 kit in your video description, or on this comment? Thanks dude.
@GR-xs4eh
3 жыл бұрын
Bill, Thanks for the information on the RS660. I've got one on order and there are not a lot of aftermarket parts available yet. I was wondering, do you use so many Spider parts because of availability, quality, price, or what? Thanks again for the information you provide.
@03557melody
3 жыл бұрын
Hi, may I know How heavy is the stock sprocket?
@blairdowling5835
2 жыл бұрын
What are the torque settings for the sprocket cover and quickshifter bolt?
@ninoellison7793
3 жыл бұрын
“Trim off one tooth” !? 😳
@BillyBob-qu3kc
3 жыл бұрын
What did you use as a marker to have the tire aligned? After loosening and adjusting the bolts? I do not see incremental lines, there are a couple, but seem far apart.
@lukewilliams3607
3 жыл бұрын
Do I have to take it to an aprilia dealership to do maintenance? Cause I’m 4 hours away from the closet one
@sergiomengon5857
3 жыл бұрын
Hi there I’m looking for chain and sprocket kit . Is the brand you are using on the bike called superlite ? Thx
@uses0ap
3 жыл бұрын
Fun Fact: Superlite sprockets are used on various bikes competing in MotoAmerica
@rytacarms
3 жыл бұрын
Put the bike down. Check the chain slack under the bikes weight.
@mociczyczki
3 жыл бұрын
what top speed you achieve on rs660 tacho or gps ?
@archetypalculinarian
3 жыл бұрын
No offense, but calling a nut a bolt makes my skin crawl. There were three descriptors for parts you removed. Bolts from the front sprocket guard, nuts from the rear sprocket, and axle, and the threaded shafts that come out of the cush drive are studs. Just an fyi.
@jieevo
3 жыл бұрын
Where to buy this TQ gauge?
@jieevo
3 жыл бұрын
@@CaliMotoTV how does the 660 read speed? Will changing teeth count throw off the speedo?
@4trmotorsports802
3 жыл бұрын
Hey.. do you guys know if I can lower my RS660? I find the ride a little too hi for me...
@lukewilliams3607
3 жыл бұрын
I believe you can adjust the suspension. But I am not sure. I don’t receive mine for another week or two but by the research I’ve done I believe so
@gamingradius8057
3 жыл бұрын
You can if it has a rear shock with linkage. They sell lowering linkages for many bikes, problem is that the aprilia is too new so I don’t know if there is one yet (IF it has a linkage at all)
@peppo.99
3 жыл бұрын
@@gamingradius8057 It hasn't a link
@gamingradius8057
3 жыл бұрын
@@peppo.99 then I guess, if you are lucky enough and have the right weight, you can soften the preload and thus lower your bike height when you are on it and the shock compresses with your weight. Probably won’t be the case though.
@peppo.99
3 жыл бұрын
@@gamingradius8057 the suspension works bad
@trannguyenhuunghi7278
3 жыл бұрын
🍵🍵🍵🍵…………
@ferenc300
3 жыл бұрын
Hi Bill, please compare the weight of the exhaust. Resulting savings :) Greetings from Czech Republic
Пікірлер: 42