Ive got 13,000+ miles on my 2023 and its been a blast for ever mile. Great bike. Needs a few things like the emperor racing radiator guards and skib plate. And definitely tires. Stock tires are great in the street In fact I have a set specifically for street riding but suck in the dirt
@danielryle5596
11 ай бұрын
Great video, I run PMR side racks on my KLX great for carrying saddle bags and keeping the weight down low!
@Paulskirocks
Жыл бұрын
Thanks for the updates. I have a brand new virgin 2023 KLX300, a pile of new parts, a few more still on order, and then the aim is to make my build as close to 100% dirt worthy as possible without engine or suspension mods. Videos like yours have been really helpful.
@kcoutside7143
Жыл бұрын
I love this bike in the woods, I love throwing on the new parts to make bikes better suited to personal use/taste! Thanks for watching!
@steve00alt70
6 ай бұрын
Does the 23 version have ABS and increased hp?
@southerndeth
Жыл бұрын
I just installed the Delkevic Exhaust, KDX snorkel and blocked off the pair valve. I can't believe the difference. Thanks so much for all the great information.
@kcoutside7143
Жыл бұрын
I appreciate ya watching! Glad it helped ya out!
@zspence77
10 ай бұрын
Frickin awesome! I love Kawasaki and when I get that 300, I am getting mine done up like that! I got a klr650 and KX500 along with ZX12R and GTR1400! ROK !!! Get sum!!! Your 300 is sweet! Great job!
@seanlockhart8431
Жыл бұрын
The best looking KLX30 on KZitem for sure. Waiting for a CRF300L, but this is making me think to go Green. My wife now has a KLX230s, nice bike love driving it.
@kcoutside7143
Жыл бұрын
Thank you! I have a new crf300L on order, I will be building it as soon as it arrives, I’ll try to make it the best on the tube also. Thanks for watching!!
@ronlawson5819
10 ай бұрын
Just got one have about 100 miles so far and love it
@DRZrider07
7 ай бұрын
Last dual sport I owned from new was an 07 Suzuki DRZ400S. I loved that bike until I was forced to sell it in '18 or '19 due to tough times. But this bike is awesome! Makes me want one.
@kcoutside7143
7 ай бұрын
They are awesome! I’m still loving it!
@LawJik
Жыл бұрын
Love your videos, thanks for the update!
@kcoutside7143
Жыл бұрын
Thanks for watching!
@GrotrianSeiler
Жыл бұрын
Good video. Lots of great suggestions. Very helpful. Thanks. Don’t have one yet but this is much more appealing than the Honda.
@kcoutside7143
Жыл бұрын
Thank you! Thanks for watching! I’m hoping the Honda’s arrive soon.
@nikomoto6757
Жыл бұрын
Looks good, you can put galferusa ss braided brake lines. I got SM version of klx300
@joshdoddadbod
Жыл бұрын
Very nice! I am greatly enjoying my KLX as well. For me the necessary mods were skid plate, IMS tank, barkbusters, and protaper bars (stock 7/8"). Future mods will likely be the adventure spec mini fairing (CRF300 one supposedly bolts right on to the triple clamps), and maybe a seat concepts, however I haven't had a sore butt on this bike yet even after driving for a few hours. The stock seat ain't bad.
@kcoutside7143
Жыл бұрын
Thanks for the comment ! The seat on this bike is surprisingly comfortable compared to other bikes. After about an hour on the seat, I start thinking about a seat concepts!
@d_ward4871
Жыл бұрын
I made a windscreen out of some nice strong plexiglass type material, put a bend in it by heating it up in my oven and it came out way better than I imagined. Keeps all the wind off my body except from my chin up. Makes riding so much better
@d_ward4871
Жыл бұрын
And I used 4 little nuts and bolts with rubber washers to secure it to the front plastic thing and 2 small rubber support pieces attached to the bark busters to stiffen everything up
@bmotomo421
Жыл бұрын
You're right about the stock rear fender. It looks horrible. That idea looks way better. The EJK tuner with a full exhaust system really woke up my KLX300R. Same with my friends Supermoto version. He used a Yosh system. I hand made my system. Great bikes, though. I kind of wish I got the dual sport instead of the R. Your DRZ was a sweet build, too. That's how I found your channel. I like all the attention to detail you put into it. I'm on my second DRZ E, myself. Still think it's one of the best trail bikes ever made. Anyway, nice job on the bikes and the videos!
@kcoutside7143
Жыл бұрын
Thank you! Appreciate the comment! If my CRF300L ever comes in, I’ll have another sweet build!
@MANIBELANIWINGS
Жыл бұрын
Nice Motorcycle Bro...
@d_ward4871
Жыл бұрын
I got mine almost the same time you got yours 👊🏼 I’m @ 3400. I’m gonna get the front fender you put on. Good idea, thx 👍 No new seat !!?? I got a Seat Con. and it made the bike so much more comfy 😌
@kcoutside7143
Жыл бұрын
Thanks for Watching!
@LarryWebb-gv8dz
4 ай бұрын
Gas tank looks nice
@chaddalziel8524
Жыл бұрын
I have the camo 2021 version but really like the Kawasaki green color.
@pinkiewerewolf
Жыл бұрын
I emailed IMS again about a larger fuel tank and they said to check back late in the Summer. They verified that they had received a lot of request for larger tanks. So there is some hope for a 3.5 gallon or larger tank. Your bike looks great! My balls got cut off with the Acerbis hand guards. Watching a guy out of Atlanta (Atl KLX, something like that) he is running shorty levers so I ordered some of those from Amazon. Honda, I wish they’d get the 300 rally bikes in the states.
@kcoutside7143
Жыл бұрын
Thanks for the info!
@eliaspergande2663
Жыл бұрын
Yeah like $400 for a .7 gallon increase seems ridiculous to me. I sure hope they come out with a 3.5 gallon!
@pinkiewerewolf
Жыл бұрын
@@eliaspergande2663 The more people that contact IMS, the better our chance of getting the larger capacity fuel tank. They were much more receptive to my email this time, than they were the first time I emailed almost a year and a half ago.
@eliaspergande2663
Жыл бұрын
I called them about foot pegs and they said they had a lot of requests for klx300 specific parts so hopefully we will get some more aftermarket support for this bike from everyone
@southerndualsport3827
Жыл бұрын
Best lookin KLX300 on the web! Looks like a proper dirtbike!👍🏻
@kcoutside7143
Жыл бұрын
Thank you! Hoping for a CRF 300 to come in, so I can start another bad ass build!!
@user-dv7hb2sc9m
6 ай бұрын
Yes Sir, you've made this bike your own as it should be - very good LQQKin' -n- functional too. At 61 I find myself looking at bikes & up to the 350cc -n- down this is one of my top choices. The 6 speed trans is important to me & most folks who're going to be on the roads. But I doubt I'd be on the interstates more than an exit or two although I guess you could? Thanks for all the info, gives me a good idea about the real costs & getting it where I'd want to be.....peace
@kcoutside7143
6 ай бұрын
Glad the info helps! Thanks for Watching!!
@user-dv7hb2sc9m
6 ай бұрын
How did you get info on the fenders from other model years? Those upgrades not only look great but both look like they'll provide more protection from water/mud than the stock fenders..... great work & ty for the video
@dbriggs1689
Ай бұрын
Good information!
@noidreculse8906
Жыл бұрын
Clean 😊
@Asdfghjkl1234
Жыл бұрын
Thanks for sharing this. Anyone know where to find the side stand footprint extender for this klx? Can’t find it anywhere. Thanks.
@arturomolina4140
Жыл бұрын
Nice 👏👏
@StansE250
7 ай бұрын
Tail mods definitely the best enhancement to appearance ….
@edtaylor6431
7 ай бұрын
The CRF300L’s are in the USA, they’re all over in my neck of the woods!
@blackhawkhockey
Жыл бұрын
Thank you for the excellent videos KC! Wondering if you have ever had an issue blowing the fuse for the headlight and running lights after upgrading to an LED headlight? I recently upgraded to a Tusk LED headlight. Thanks in advance KC!
@kcoutside7143
Жыл бұрын
Thank you! Thanks for watching! I haven’t done an LED upgrade, so unfortunately I have no input on that!
@johnkorn1810
15 күн бұрын
Really wish I could buy this bike off you.
@chandlercrewdson5017
Жыл бұрын
Loving the build. You mentioned the Tusk blinkers, but what rear taillight do you have? Thanks!
@kcoutside7143
Жыл бұрын
It’s a polisport universal tail section. It requires some modifications to the polisport section itself, not to the bike.
@carlmarois4845
Ай бұрын
Hey ! trying to get that front fender…does it looks more familiar as an acerbis or polisport ? Thanks !
@Bikerdad_85
Жыл бұрын
Bike looks fantastic. I'm curious if you seen the 2024 klx300. From the looks of it , all the mechanical thing's are the same but they changed plastics, black wheels on the kawi greend model and headlight. So basically just cosmetics . I'm currently riding a drz 400 but I think I will pull the trigger on a 2024 klx 300. I like the current klx 300 but dam is the refreshed klx300 is sexy. Ride safe 🤙
@kcoutside7143
Жыл бұрын
‘24 looks awesome, I will probably put the ‘24 plastic (side panels & rear fender) on my ‘23 or at least attempt to see if it fits.
@eliaspergande2663
Жыл бұрын
So I just bought a 2023 klx300 like a month ago and I’m brand new to bikes….I went out riding yesterday with my dad and I rode pavement, dirt road, then pretty much steep single track. The bike is stock and seems to handle everything great until you get onto steep off-road terrain. I was going up a hill in first and was going kinda slow and the bike bogged out in first. I am pretty sure I need a regear to lower gears and open the bikes air intake and exhaust then a fuel tune. I will primarily be riding steep off road but I still want the bike to be able to get around on the highway (not interstate) at like 60-65. Any input and advise would be greatly appreciated. Thank you for the video KC and everyone in the community of klx300’s I appreciate everyone!
@kcoutside7143
Жыл бұрын
The 13 tooth front sprocket is going to be the best mod for you, you’ll get better bottom end for hills, but still be able to do the 60-65mph. Procycle.com has the sprocket, you have to search under klx250s menu
@eliaspergande2663
Жыл бұрын
Thanks brother! You have a great channel. You got a sub and like from me right away. Keep doin you and much love from Colorado
@eliaspergande2663
Жыл бұрын
Hey what do you think about a 42 in the rear? Or just go 13 up front?
@Paulskirocks
Жыл бұрын
@@eliaspergande2663 That is what I am running. Perfect for trails.
@steve00alt70
6 ай бұрын
You can install a fuel meter gauge to it
@maxcactus7
Жыл бұрын
I definitely don't want to cut my balls off, but other than that, this was an excellent video and your KLX mods are tasteful, practical and well-executed!
@kcoutside7143
Жыл бұрын
Lol! Thanks for watching! Thank you!
@durl1963
Жыл бұрын
18:48 you mentioned you didn’t have any issue with spark plug snorkel exhaust, and you aren’t using an EJK tuner. So I’m assuming your not getting any deceleration pops or backfires? I also remember one of your videos you mentioned removing your PAIR valve. Do you think that has anything to do with your lack of engine issues? I feel like I’ve heard of people having issues after installing exhaust with the engine backfiring and popping and that removing the pair valve eliminated that issue
@kcoutside7143
Жыл бұрын
Deleting PAIR valve will take care of decel pop. Even with it still connected, there’s only minor popping until engine gets to temp. I forgot to mention in vid that mine is disconnected.
@rayjohnson8534
Жыл бұрын
Have you had any issues with the temp light coming on? I’ve only put 300 miles on my 2023 so far and it’s happend twice. Both were driving slow thru rough trails it would go off and I noticed the fan wouldn’t be running. After turning it off for a bit it would be out when I restarted and doesn’t come on while riding around I guess from air pushing thru the radiator. Seen other people talk about this issue but wanted your input.
@kcoutside7143
Жыл бұрын
I haven’t had any temp issues yet. I have done several low speed hot weather trail rides , with plenty of fan cycles. I did check my coolant levels when bike was new. In the radiator & rear reservoir.
@DrewCreate
Жыл бұрын
What moose rack is that exactly? I’ve been looking for something just like that. Great video! If I can find that rear fender in black I think I’ll do the same setup!
@kcoutside7143
Жыл бұрын
Moose Racing Expedition rear rack. Black fender should b available
@DrewCreate
Жыл бұрын
@@kcoutside7143 thank you!
@jeffturner4218
5 ай бұрын
I just got a KLX in camo, love it. Wanted you're opinion on the seat. Do you like it? Jeff from ND GREAT VIDEO
@kcoutside7143
5 ай бұрын
I have a sensitive ass, but it is a very comfortable seat IMO. If I were doing rides of which I was seated for more than an hour, then I may go Seat Concepts.
@billbob9304
11 ай бұрын
Does the rear fender mod have any front mountings, or are you just using the mountings on the rack bracket?
@kcoutside7143
11 ай бұрын
I only used the 2 holes for the tool kit if my memory serves me correct.
@billbob9304
11 ай бұрын
Is that a black piece of tape on the back fender? Is that for covering holes in the fender?
@kcoutside7143
11 ай бұрын
They are pieces of Gorilla tape, in case of emergency, you can peel a piece off & use it for a repair. I should have given an explanation in vid.
@aaronhansen8037
Жыл бұрын
So is your O2, and pair valve removed? Also what year of KDX did you get the snorkel from? I just picked up my new 300 on Saturday. I’m thinking of going with the Yoshimura exhaust but your seems nice for the $$$. Thanks
Hey KC...trying to install some bar risers by Kemimoto, 30mm, 7/8" handlebar. No matter how much I tighten them, the handlebars won't stay in place. Did I get the wrong size for the stock handlebar?
@vidthusiast
11 ай бұрын
Is the stock handlebar a 7/8"?
@vidthusiast
11 ай бұрын
I think I know what I did wrong. A KZitem video said to put the washer on the bolt between the top of the riser and the bottom of the top mount. I think that was wrong because that would make the space for the handlebar larger.
@kcoutside7143
11 ай бұрын
Stock bar is definitely 7/8”, hopefully you got it figured out!! Sorry I didn’t get back to you sooner!!
@bobthomas2812
Жыл бұрын
any suggestions on a windshield for longer adventure rides
@kcoutside7143
Жыл бұрын
I installed a Baja Worx rally on my DRZ 400 before I sold it, they are a universal fit, but it worked well.
@user-zn2rk5iz9q
Жыл бұрын
I have a KLX 300 SM how hard is the exhaust to put on and how loud is it?
@kcoutside7143
Жыл бұрын
Takes about 20 minutes max to swap out. With quiet core installed it has a nice sound at full throttle, but quiet when just trail riding, I have an install video up, I believe I have a sound clip in that video.
@craigstevens5146
Жыл бұрын
I can’t find the video where you listed all the links to parts, can you share that?
@kcoutside7143
Жыл бұрын
Rockymountainatvmc.com Procycle.us
@vidthusiast
11 ай бұрын
Hey KC...how often do you change your oil? According to your video, you've changed it three times by 2000 miles.
@kcoutside7143
11 ай бұрын
I always change more frequently than recommended, I do a lot of slow trail riding in hot summer temps, so I usually change every 500-800mi. Overkill I guess to a lot of folks.
@vidthusiast
11 ай бұрын
Good to know...
@julianchalias2358
3 ай бұрын
what gearing do i need to cruise at 70/75 on my klx?
@kcoutside7143
3 ай бұрын
I can't answer that for sure, but you may want to go smaller on rear sprocket, maybe 38 teeth.
@somenath1061
3 ай бұрын
Do you have a radiator guard on your bike?
@kcoutside7143
3 ай бұрын
Thanks for watching
@kcoutside7143
3 ай бұрын
I do not at the moment.
@ShadowVonChadwick
Жыл бұрын
Did you see the valve tit laying over? You need maintenance
@zr2trackerjoe
Жыл бұрын
I wish I had the motivation to make a KZitem video on my KLX. I'm about 4 tanks away from 10k mi
@kcoutside7143
Жыл бұрын
That would be a good vid! I don’t even no if mine will ever get to that mileage as long as I own it.
@TRAIL325
Жыл бұрын
I just hit 22k on my 2012 351 heavily modded with no issues
@shoechew
7 ай бұрын
@@kcoutside7143 You'd have to ride it for that to happen.
@Abyssdiver
10 ай бұрын
3 oil changes for 2k miles.... So very unnecessary!
@rustystubbs242
7 ай бұрын
Oils Cheap
@Abyssdiver
7 ай бұрын
@@rustystubbs242 If you think $9-15 a quart for oil is cheap you must be rich. Spend that money un-necessarily all day long!
@rustystubbs242
5 ай бұрын
Not sure why you’d spend $9 to $15 a quart when you can just use a regular HDEO such as Shell Rotella T for $3 a quart when it runs on sale several times a year.
@Abyssdiver
5 ай бұрын
@@rustystubbs242 -All I ever use in every vehicle I own including motorcycles and ATV's all have Shell Rotella in them. Been using it for YEARS now and have never seen it for $3 a quart EVER. Not even when Donald Trump was president and everything was much cheaper than it is today. Bidenomics is working right?
@rustystubbs242
5 ай бұрын
Canadian Tire up here in Canada clears out a 5 litre jug Rotella 15-40 anywhere from $15 to $18 bucks a couple times a year, just have to keep an eye on their sale prices. We’ll trade you Trudeau for Biden any day. Not sure who’s worse but definitely two leftists ruining the country.
Пікірлер: 107