Thank you for this amazing video! I copied 95% of this and built my first drone from it and it flies wonderfully.
@pseudo_yt5598
2 жыл бұрын
How many min. It flies in single charge
@mikewedgwood697
2 жыл бұрын
Why did you copy 95% instead of 100%? What was the 5% that you chose not to follow?
@Lachy_On_Top
Жыл бұрын
@@mikewedgwood697 he may have decided to build it with some analogue parts rather than digital
@karanhiragar4587
Жыл бұрын
Bro which remote control and vr googles you used? How much it costs?
@troyspruit2325
Жыл бұрын
@@pseudo_yt5598 I've been cautious with not draining the batteries too much so maybe around 5.
@orionpax16
17 күн бұрын
Second best part of hobby. First flying. Nice build
@sshdrones
2 жыл бұрын
Hey man....I just tried the dental floss trick for the ESC and it worked ! That's how valuable your tutorial is....I've watched it multiple times. Thanks again!
@TRONCATFPV
2 жыл бұрын
haha that dental floss trick is definitely handy, glad the video helped! 🙌🙌
@digitalghosts4599
Жыл бұрын
Great tutorial! I found it really helpful! I have just one advice as an electrical engineer when it comes to soldering - if you can, use leaded solder and add a lot of flux on the soldered coated pads before soldering the wires. Generally gel flux works better than those flux pens. At the end the leaded solder joint should be shiny. I recommend leaded solder, because it's still used in aerospace industry thanks to its superior resistance to vibrations. Cheap lead-free solder, especially one without a healthy amount of silver, such as the cheapest Sn 99.7% Cu 0.3%, is prone to cracking and I would not recommend it for use in drones, as it can give up on you after a few crashes or worse - in flight.
@dugy40
Жыл бұрын
He didn’t clean his solder tip once either and dip in flux and a brass cleaning thingy.
@ketratech8165
8 ай бұрын
Best thing to do is inhale the fumes. Its really good for muscle memory when handling the drone
@ACodeGaming
2 жыл бұрын
Clean build ive never build one before but after watching this i want to try
@trentondrones6429
2 жыл бұрын
Definitely build your own drone it’s a lot of fun!
@missme9247
2 жыл бұрын
I am not a promoter for any type or company of fpv but I mysef learned how to build through KZitem university and a xilo 6s hd complete build kit. There are many types of diy fpv build kits on the market that is a great starting point to learn how to build following a step by step video. Only thing I truly recommend is learning how to solder properly . Rotor riot has solderless solder free builds but in the world of fpv soldering is usually a must have skill for repairs and believe me when I say you will crash and need to repair
@rosco4659
2 жыл бұрын
Do it! It's one of the best parts building it yourself
@slowride5633
2 жыл бұрын
@@trentondrones6429 I want a good low light camera for sunsets so I was going to buy a Mini 3 Pro but I ran across some of these custom drones and I am wondering if I can build a custom one with an even better camera. No idea though, just started my journey on this
@drone-vision
2 жыл бұрын
I want to build too ;) Fly Safe ppl
@dieseldiesel9292
Жыл бұрын
That looks a lot easier than I thought it'd be. Thanks for posting this, it's very helpful.
@lucaschapman1966
2 жыл бұрын
Just some support to people nervous, long time line of sight planker here. I have quite a bit of soldering practice but I decided to build my own drones. Was a headache at first, but used jb’s guide eventually and built up a few drones and had a small fire or two but now I am building some sick drones and encourage others to try. Very satisfying and think it would have gone way easier if I followed a diy kit off the bat. You all can do it!
@TRONCATFPV
2 жыл бұрын
100% agree with this 🙌🙌
@Donesan707
2 жыл бұрын
THANK YOU! This is what I was looking for. I want to build my drones and since I have an electronic background but FPV is new to me. I know the basic components needed but the specs is were I struggle to understand. Hope to see more videos like this one. ⭐️⭐️⭐️⭐️⭐️
@shaywelshofer9000
2 жыл бұрын
Built my 1st one about 5-6 years ago. Crashed it so hard it burst into flames lol. Finally decided to rebuild and try again, and this video was a huge help/quick guide to remind me that it's not really as hard as it seems. Side note, trying to solder with not so steady hands sucks lol.
@TRONCATFPV
2 жыл бұрын
Holy shit thats insane lmao My first drone build never even flew. Plugged in a lipo and immediately went to smoke. I soon found out about smoke stoppers and hasn't happened to me again (Knock on wood)
@shaywelshofer9000
Жыл бұрын
@@TRONCATFPV Nice. The joys of learning I guess lmao
@moneymantra7318
Жыл бұрын
That's cool asf lol. I didn't even know they could catch fire
@Andyw1228
2 жыл бұрын
Congrats, you are one of the few in drone/RC who can solder! Most videos I saw they heat up the tin and then try to put it on the lead or pad, so one could get cold spots later.
@TodaysBestDeals
Жыл бұрын
That looks a lot easier than I thought it'd be. Thanks for posting this, it's very helpful. 😍
@TheDroneExperiment
2 жыл бұрын
This was fascinating. I really want to start building my own drones but have been a little scared. This really helped!
@sethenewman4309
Жыл бұрын
Don’t be scared use a super high temp like degrees 800c
@calmarcalmar
Жыл бұрын
@@sethenewman4309 ? with soldering?
@sethenewman4309
Жыл бұрын
@@calmarcalmar yes with soldering
@sethenewman4309
Жыл бұрын
@@calmarcalmar my bad 800F
@Johnny_B_85
Жыл бұрын
where can i find the screws you used to hold the caddx vista down?
@barry_dalive
Жыл бұрын
Awesome tutorial brother. I’m new to the hobby and this was a tremendous help to better understand the basics of everything. Much appreciated ❤
@ybharoochi
2 жыл бұрын
Most comprehensive and informative video I've come across on youtube 👌
@TRONCATFPV
2 жыл бұрын
Glad it was helpful! 🙌
@robrever
2 жыл бұрын
Another awesome build video! Very clear and concise. I did your $150 build and regret NOT going digital. I will probably build this one next and just go all in with the DJI digital setup. Thanks dude!
@TRONCATFPV
2 жыл бұрын
I made the leap from analog to digital last year at somepoint. Although the VTX/Camera cost is significantly more, it is so so so worth it.. I still have a couple analog quads and can hook up my rapidfire module to my DJI goggles otherwise everything else is converted to digital at this point. Thanks for watching!
@AngryPepper1964
2 жыл бұрын
@@TRONCATFPV I totally agree, I ended up winning a prize pack from J.B. that included a GepRC Crown HD CiniWhoop, that was the excuse I needed to purchase a set of DJI goggles. I’ve never looked back, digital is absolutely amazing 👍
@missme9247
2 жыл бұрын
Them stealth motors are pretty sick. I did a xilo build that had them and they work very well with little heat on stock profile
@TRONCATFPV
2 жыл бұрын
Agreed! I love how they fly. for the price you cant beat them
@Kraken9911
2 жыл бұрын
I've been building PC's since the mid 2000's. This feels similar in that you just need to know what a full parts list should consist of before starting. I'd rate this is as slightly harder though since PC building is basically legos. The required soldering action for this makes it a bit harder for the true casual. That requires mechanical skill and also the ability to analyze a wiring diagram. I thought a DIY drone would be some highly complex stuff but my perspective was from a long time ago before the industry matured to what it is now. Thanks for the confidence boost for when I attempt mine!
@TRONCATFPV
2 жыл бұрын
There are a couple DIY FPV drones out there that require no soldering and instead use plugs for everything. Since with FPV you crash alot, its very valuable to know how to solder haha. Thanks for watching and good luck with the future build!
@user-xu4kt4di2u
Жыл бұрын
@@TRONCATFPV How many minutes does the batteries fly?
@rosco4659
2 жыл бұрын
The floss technique. Best new technique this year
@MrHood5252
2 жыл бұрын
Bro you are my go to!! I've been wanting to build my first quad after repairing my DJI FPV using your vid "HOW TO CHANGE A DJI FPV ARM" and the confidence you have given me with your video is immeasurable!!! I will be building this drone within the next few weeks and will let you know how it went.
@TRONCATFPV
2 жыл бұрын
🙌🙌 Love to hear this, I'm glad my videos have helped ya!
@davechristmas1183
2 жыл бұрын
@@TRONCATFPV would you build one for me and I buy it from you
@ArtDrone
Жыл бұрын
How it went James?
@MrHood5252
Жыл бұрын
@@ambroszkiewiczadrian Dude it was actually fairly easy with the help of Tron! Piece of advice when doing it be sure to keep all screws with the parts they come off, if you don't it can become very confusing. This vid makes it super easy though!!!
@MrHood5252
Жыл бұрын
@@TRONCATFPV Nice dude!! Didn't see you commented on my post!! Thanks for the help bro it was clutch!!! I also watched an old video of yours where you built the whole drone at an eco price and I was gonna do it but couldn't find all the part you listed. Any advice on a durable build for someone first going manual?
@alexn78666
2 жыл бұрын
MHz = MEGAHertz - mHz= milliHertz
@sshdrones
2 жыл бұрын
That's a clean build. I will definitely use this as a blueprint. Thank you
@TRONCATFPV
2 жыл бұрын
No problem, glad the video helped! 👍
@sshdrones
2 жыл бұрын
@@TRONCATFPV dude it really did...I would love to watch more build. Keep up the great work !
@PhillyDroneLife
2 жыл бұрын
Awesome build my friend. You just soaked something inside. Thx for taking your time with us older folk.. were cool too ya know . Lol. Thx mate.. Mikey
@brayleyhammond1397
Жыл бұрын
23:50 “hex screws, or hex bolts” yeah close enough haha. Awesome build
@caseybrowning9148
2 жыл бұрын
OK that floss trick was really cool
@KJ-ql4nm
2 жыл бұрын
Excellent content. Really rare to find videos like yours.
@TRONCATFPV
2 жыл бұрын
Thanks!
@werf6443
Жыл бұрын
I'm gonna have this as a hobby when i get a job
@kioliex
Жыл бұрын
WOW, i can't belive how easy it is now... Not like when I started 12 years ago on a Arduino board. Great video...
@opticchill2706
2 жыл бұрын
What good cheap goggles and radio go good with this
@GR33ZY.A1
Жыл бұрын
Sick. My first time getting into fpv quads.. Just ordered a 5inch. Can't wait
@dankipa
Жыл бұрын
Awesome video and thanks for taking the time to break everything down Barney style for us! 🤘
@jerwinllanes3246
Жыл бұрын
hi troncat im the big fans of yours im from the philipines thats my dreams drone hope u see this message and i never had 1 godbless and more videos to come thank you bro
@KiwiPhil.
Жыл бұрын
nice vid. getting into diy builds is pretty overwhelming !
@piraciosu3
Жыл бұрын
Your Videos just got me to the Fpv world gonna make this one, thank you!
@TRONCATFPV
Жыл бұрын
🙌🙌
@rawat3145
Жыл бұрын
I still only have a dream: to buy a drone because I have no money love to see your drone video 🙃🙂🇮🇳❤️
@ryanpetty392
2 жыл бұрын
Great job on the build and video !!! Nice conclusion flight as well! I thought I was the only one that shook during a build, my buddy and uncle made fun of me for it.
@TRONCATFPV
2 жыл бұрын
haha when you're working on such small electronics I think you're naturally gonna shake a little no matter how much practice you have lol. Thanks for watching!
@trippen5017
2 жыл бұрын
Idk what ur talking about the screws that came with the drone are huge they prolly also have a good personality
@yaseenarshad6099
2 жыл бұрын
Wwwoo nice start music
@RC_Aviator
2 жыл бұрын
nice build. very clean! friendly tip, try turning up the temp on your iron a bit. I noticed the solder not quite getting to temperature when you were doing the battery leads on the ESC. thats a result of the iron cooling down too much. you can either turn the temp up or wait longer in-between soldering each pad. that way your soldered pad will be a nice dome shape with a mirror finish. which leads to a better and stronger connection. The hotter your iron is, the more you can do before it drops below the threshold to properly melt the solder.
@TRONCATFPV
2 жыл бұрын
Typically i have my soldering iron set to 420°, I'll keep this in mind. Thanks!
@RC_Aviator
2 жыл бұрын
@@TRONCATFPV No problem! 420 Fahrenheit? a good range would be 320c-350c (600f-650f) for lead based solder.
@TRONCATFPV
2 жыл бұрын
@@RC_Aviator Celsius
@RC_Aviator
2 жыл бұрын
@@TRONCATFPV oh okay yeah that should be more than enough. just need to let the iron heat up a bit more between pads. also a side note, on most pcb's the ground usually runs throughout the board to all other ground pads, so it pulls much more heat than non ground pads.
@fpved6888
2 жыл бұрын
Verty good build video, I've been in the hobby for over five years and picked up several helpful tips. Thanks.
@timkarge1330
2 жыл бұрын
Love your vides I'm just getting in to drones I got a dji mini se I wish I had one of your builds thanks for shareing
@Donuts_random_stuff
Жыл бұрын
I liked the Ryan air landing at the end 😅
@cristianoancea1183
6 ай бұрын
This is pure gold !
@The_Real_Zaineman
10 ай бұрын
I really enjoyed watching you build this drone
@scu-dub
2 жыл бұрын
This quad turned out AWESOME man SUPER CLEAN BUILD 🤌🏽✌🏽
@TRONCATFPV
2 жыл бұрын
Thanks! 👍
@rshunter9155
2 жыл бұрын
I liked the cap mod attached to the plug. Great idea!
@marklitvin9291
2 жыл бұрын
Some serious nails you got there brotha 😂 stripping down those edges this way 😯
@sheikhtanvir333
2 жыл бұрын
I badly need this drone🤧❤️
@daz7960
Жыл бұрын
Неплохой дрон собрал ) я хоть ничего в долгах не понимаю , но с удовольствием посмотрел )
@moosesnWoop
2 жыл бұрын
0:10 took me another second to realise that this wasn't animated, it's another drone filming a drone in a cinematic way
@muhammadrizqimulyanto9259
2 жыл бұрын
Cool Bulit, Good video... 👍 (Clear description with step by step detail)
@GuruWR
2 жыл бұрын
Genius... I lost it at programming.
@TMBProductions12
2 жыл бұрын
Awesome video dude! Build is clean and the drone is sick 🤙
@TRONCATFPV
2 жыл бұрын
Yea buddy!!
@JoseHernandez-rl8fx
Жыл бұрын
Dude your Rock, thanks for the detailed video and how you show how to build and sodder correctly and where everything goes I enjoy this type of context again .Joe Nyc
@neebftw
10 ай бұрын
As a nail biter, i gotta say.. my mans got wolverine blood in him with those nail strengths.
@can5projects563
2 жыл бұрын
Awesome build nice and clean Looks fantastic
@falsedragon33
Жыл бұрын
The bypass capacitor provides a low-impedance path, allowing AC components in a DC line to pass to the ground. The ability of the capacitor to reduce noise and stabilize power depends on capacitance (also a function of the pulsing frequency), voltage, and the placement on the board. Bypass caps are always placed as close to the load as possible. Putting it down the line is only adding more parasitism. This can cause power loss, add additional noise, as well as create an unstable circuit. I'm not sure anyone doing drones understands what that capacitor is doing, or even the function of a capacitor.
@jackclemons4098
2 жыл бұрын
I love your build videos! I’d love to see a 200$ 4inch long range drone build
@TRONCATFPV
2 жыл бұрын
Noted! My 2022 budget build will be coming out in a couple weeks 😉
@BauBoomBang
Жыл бұрын
Nice Drone, Nice Video!! Thanx from Germany !
@MrSabram07
2 жыл бұрын
wow i love how simple you make it look lol
@AbinashBtry
Жыл бұрын
Beautiful Experience brother 💕🫶👍🔔
@johndschult
2 жыл бұрын
Nice! FWIW screws are what you use to attach something to a medium, those are all bolts and nuts.
@lucaschapman1966
2 жыл бұрын
Also thanks so much for the dental floss trick, I have ripped so many dampeners, Yeesh!
@williamwan9923
Жыл бұрын
Good. I find it complicated though, especially the tuning
@tre7208
2 жыл бұрын
Great video…your teaching definitely gave me the confidence to try this build.
@TRONCATFPV
2 жыл бұрын
Love to hear this! 👍
@matthebert007
Жыл бұрын
I have built about 10 drones. You got a thumbs up and sub for the rubber grommet/ dental floss trick. I hate that part. I hate those grommets. There have been times where I have put off a build because I was thinking of the terror of trying to get those stupid grommets in the mount holes. Those things had me punching myself in the face after putting spit on them to get them to slide in and cursing at them under the magnifying glass only to realize I put them in upside-down 🤦♂
@TRONCATFPV
Жыл бұрын
haha i'm glad that tip helped you out 👍 Those grommets SUCK. I've put them in upside down before I knew this little hack. Thats the stuff of nightmares
@yosuanya.sanchezgarcia5677
Жыл бұрын
thank u, this is just amazing and easier than i thought
@Sphyxx
2 жыл бұрын
Imagine making a chair that's connected to the drones gyro where it would twist and move making it more feel like you're in the cockpit of the drone (might not be able to do flips on the chair)
@TRONCATFPV
2 жыл бұрын
check out medlin drone company, he makes servo setups for FPV drones that actually move the camera. Ive been playing with mine quite a bit and it takes alot of practice but its pretty wild.
@mtclimber8510
Жыл бұрын
Nice solder work!
@party3ah85
Жыл бұрын
Its awesome mate! Thanks for all the details!
@XRP_321
Жыл бұрын
nice soldering 💪
@Jangmo_SC
2 жыл бұрын
I was looking for just this kind of video. Thanks!
@TheKawasakiBros
Жыл бұрын
ok i retracted i always comment as im watching lol this is such a dope build bro! i will be trying this one soon!
@MiniatureChickenChannel
2 жыл бұрын
130K views baby!!!!! This channel gonna pop soon...goodbye 16.5K subs...hello 50K
@TRONCATFPV
2 жыл бұрын
Right!? im hyped. The budget build video is quickly approaching 1.5 million lol. way beyond what I ever expected!
@MiniatureChickenChannel
2 жыл бұрын
@@TRONCATFPV Keep at it dude....you'll have a nice adsense revenue doing what you love!! I enjoy your vids..they are well done. I'm quite jelly!
I WILL be creating my own monster thanks to you :)
@TRONCATFPV
2 жыл бұрын
🙌🙌🙌
@Marcus2750-u1t
Жыл бұрын
U had a 9v and gnd at the back of board also to make it neater but hey it still looks great a clean build!
@muratkhan2997
2 жыл бұрын
Ohh, man , you are genius ❤️ you make it so easy for us❤️ Thank you 💕 keep it up 🥰 subscribed ❤️
@Marcus2750-u1t
Жыл бұрын
Great video and I build my own as well the thing I noticed was the copper winding at the bottom of motor is hanging out and low! Ive never seen a motor like that so you may wanna watch it. Thanks for everything!
@freelancerfree9782
2 жыл бұрын
super quality and amaazing.make it so easy.i want t build my own drone.thank you.man
@TacticalDroneTV
Жыл бұрын
Nice PlLOT!!!
@geochannel85
2 жыл бұрын
Thanks... I really like this video... easy to learn how to build from 0.
@SirCrashaLot
2 жыл бұрын
Hey if I can add to it: grab quality solder, it looks cold now. When at it, consider ts100, its so much better its not even a fair comparison.
@Phillyfpv
Жыл бұрын
Ohh by the way very nice and clean build, excellent work👌
@PabloOlmedoJr
Жыл бұрын
amazing built.
@JackJeganesan
2 жыл бұрын
WOW....thank you absolutely got my interest in building my own drone now but just worried might screw things up😂😂😂
@donphobos
Жыл бұрын
Very clean build, nice!
@jeremypajotart
2 жыл бұрын
Can you do a "behind the scene" of your drone tour in real estate, and talk about your setup : the antennas you prefer for HD system, why do you prefer multiprops...it would be awesome content !
@TRONCATFPV
2 жыл бұрын
I plan on making a whole youtube playlist featuring this type of content. keep an eye out within the next month 😉
@kavindachamod4330
9 ай бұрын
Wow this is amazing. I always wanted to follow you and build my own drone but i can’t get stuff needed here😢
@RahumiExtra
2 жыл бұрын
Please can you make 10 inch build
@FunkyPhilMusic
2 жыл бұрын
Looking for a pretty nice analog build for freestyle and semi-long range. The budget is about 200-250€ included shipping in Europe. Build doesn’t include radio controller and goggles.
@likwidkool
2 жыл бұрын
Thanks for the video. I need to solder on the same esc and this really helped me visualize just what I need to do. I’ve installed receivers before but never a stack. If it comes out half as clean as this build I’ll be happy.
@TRONCATFPV
2 жыл бұрын
If you've soldered a receiver you'll deff be able to do the ESC 👌 Typically the ESC has bigger pads and is easy to work with.
@likwidkool
2 жыл бұрын
@@TRONCATFPV thanks man. I did it and it works! Appreciate your channel man!
@thfpv4974
2 жыл бұрын
That's a nice biuld for the money's thanks for sharing 👍🏼
@marciosilva6227
2 жыл бұрын
Nice nice vídeo man! Very good!
@huntercooke9592
Жыл бұрын
Nice build but probably should use something to protect the motor wires
@mfrfpv9079
2 жыл бұрын
sick build
@zakaroonetwork777
9 ай бұрын
I just got my frame in the mail. Its so much Smaller in Person that it looks on Camera. Ive never seen one in real life.
@MaulikBhavsar83
2 жыл бұрын
Absolutely brilliant... You've earned my subscribe! Noob question - If a particular motor/esc/fc/controller etc isn't available, how can we know if the alternative will pair with the other existing parts?
@ACTIONDANhero
11 ай бұрын
Amazing. Im gonna jump right n and see if i could build it.
Пікірлер: 800