This is a awesome machine. I have a 2023 XMR and absolutely love it.
@danemery7228
Жыл бұрын
Thank you very much! Congratulations on the new rig!
@donserwinski7207
2 жыл бұрын
Great video. You have many of the same options that I installed on my XTP. 1500 miles of joy without any failures. Just added overhead fan for cabin cooling. Build quality much better than my old Polaris RZR.
@UTVBoondocker
2 жыл бұрын
Thanks! Dan is loving it and I can't wait to ride with him on the trails. Our annual trip is coming up and the video should be pretty good! Stay tuned and thanks for watching!
@gr6044
Жыл бұрын
I just picked up the same unit as yours this week. You have some great ideas! Very sanitary installs.
@UTVBoondocker
Жыл бұрын
Thanks for watching and congrats on the new rig!
@scottbuffdaddy
Жыл бұрын
Do a video on how to quiet the noise these have in certain rpm range. I have 30hrs on mine and called dealership about the problem and they said it wasn't a complete fix and would only last about 50hrs. Basically saying I have to live with it
@UTVBoondocker
Жыл бұрын
We are actually working on that. There is a method to get it fixed or reduced. I'll bring it up again to Can Am Dan so we can get started on it.
@danemery7228
Жыл бұрын
Scott, The latest idea and has some great results is to remove the drive shaft that is running the front diff and sliding a hydraulic or heavy rubber heater hose over it. This will not cause any balance issues and it kills the dreading harmonic vibration at certain RPM's. Every max unit has it so it is very common and BRP has not offered a solid answer on how to fix it down to the dealers. Thankfully it does not hurt anything as the shaft is not spinning when you do hear that, but is it annoying for sure. I will be doing this mod myself and will be sure to make a video to add to the page.
@davidanderson961
2 жыл бұрын
Looks great! I've been looking for more ideas to add to mine. One of my areas of interest is getting the right switch controller and where to mount it.
@UTVBoondocker
2 жыл бұрын
Glad you enjoyed it and thanks for watching! I'm sure Dan will chime in with some ideas that he has for switch controllers. Also, we have another small video on the mirror and wind deflector that will be posted this week!
@davidanderson961
2 жыл бұрын
@@UTVBoondocker sounds great!
@TheEmerys1
2 жыл бұрын
Hey David, thank you for watching! I do not have the multi-switch panel as I only plan to use a few aux switches but, if you look at MarqCad Engineering page he makes a ton of UTV tidbits and one is a sweet little 3 switch panel that works perfect on the G2 XT's. In total you can have three from his panel, one next to the key knob, and then the two on the center console so that far more than i will need for sure.
@davidanderson961
2 жыл бұрын
@@TheEmerys1 sounds good. The tough part is being patient and not going overboard right at the beginning, lol. I will definitely check that site. Thanks!
@danphillipsrealestate8805
2 жыл бұрын
I used a switch pro on mine and love it!
@27mikemelton
5 ай бұрын
What are the battery boxes? There's no link for those are they custom? They look great. I'm trying to build my dual battery setup. How do the seat risers feel?
@ogcanamdan
5 ай бұрын
I love the risers! Much better view for sure and some leg room. The battery is under the drivers seat and I made up a strap out of steel to hold it in place is all.
@27mikemelton
5 ай бұрын
Oh ok I thought it was a custom drop in lol. Very cool
@27mikemelton
5 ай бұрын
What is the panel under the dash mounted to?
@ogcanamdan
5 ай бұрын
I bolted it to the brace that runs next to the glove compartment and ran a screw through the fire wall on the other side. Seems to have held up great.
@mingomane1
2 жыл бұрын
You should do a comparison between this and the general 4. I’m debating between these 2 and the rmax4 for my next rig. Coming from a krx.
@UTVBoondocker
2 жыл бұрын
I love that idea! I will plan on it. If you have any suggestions on content to compare, drop me a line here or email: uvtboondocker@gmail.com. Thanks!!
@joshchapman7911
Жыл бұрын
Did wrapping the radiator lines help? I did something similar to mine but still have plenty of heat coming from the front by my feet. Any suggestions?
@danemery7228
Жыл бұрын
Josh, I believe it did a bit. I wrapped the lines individually with exhaust wrap then took some thick scrap silicone foam and made a secondary tunnel over the whole thing and secured it using aluminized HVAC tape. Pretty happy with the outcome. Yes still some heat but nothing like stock.
@joshchapman7911
Жыл бұрын
What exhaust wrap did you use? Did you wrap it from radiator to engine?
@TheEmerys1
Жыл бұрын
I used an exhaust wrap from DEI. I only wrapped it in the cabin area. Kind of a PITA honestly but happy with it for sure.
@joshchapman7911
Жыл бұрын
Thanks for the info. One last question. Does the general have heat issues also?
@TheEmerys1
Жыл бұрын
Ooohhh yes, generals are really warm. I am using the air deflectors on my commander and that has made a huge improvement as well with the full windshield.
@KentuckyCanAm
7 ай бұрын
Foam on seat back rails? Why and which video?
@danemery7228
7 ай бұрын
kzitem.info/news/bejne/23l9qGePe5V5aIIsi=4iS7FBYbF20e3GwD Here is the video from how I pack for a trip. The foam wrap is shown early in the video. I use it to protect my dry bags as the rails are quite sharp and will easily damage any gear riding back there. Hope this helps and thanks for watching!
@danphillipsrealestate8805
2 жыл бұрын
Looks great!! I have the same windshield and love it. Wondering what brand and where you got that tablet holder?
@danemery7228
2 жыл бұрын
He y Dan! It is from Mob Armor, I am using my 13 Max Iphone but I do believe they have a tablet holder as well.
@flip3255
2 жыл бұрын
@@danemery7228 awesome thank you I will check them out!!
Пікірлер: 33