This is an excellent channel. I love all the real world examples and use cases you could do with the truck bed. This was a BRILLIANT video in that regard. Hoping for more truck bed videos in the future.
@dennisporter753
Жыл бұрын
That's fantastic.. works great!... it will be so much faster and easily hauled back into the Maverick.. Well done..
@christopherrosas2738
Жыл бұрын
This in an interesting design, what I might have recommended would be mounting to iron or steel piping for the mount for strength and then a pulley guide that could be mounted onto the t-bar to lift the boat up and out using just the power of the winch
@wishingiwasfishing8396
3 ай бұрын
Nice to have those notches in the truck bed. Makes it easy, I'm still trying to figure out how to mount mine
@cs92lx
3 ай бұрын
You can do it!
@garrycollins3415
Жыл бұрын
Nice use of the FITS!
@BucketListBadass
Жыл бұрын
Been trying to find a practical, easy, and affordable way to secure an electric winch to the back of my pick up truck, and boom....you helped solve my problem! Thanks brother! Liked & sub.
@cs92lx
Жыл бұрын
Glad I could help
@texasbradley
Жыл бұрын
Like those commercials, "Real Men of Genius"
@Stoney47
Жыл бұрын
good job. enjoy your video's
@jeromecummins8013
Жыл бұрын
The winch cable may rub the bed or tailgate. I suggest replacing the winch cable with a winch rope which can be purchased from Harbor Freight, Amazon or other retailers. That winch is an idea we will see more of on KZitem. The boat loaded a sight easier than the first video.
@cs92lx
Жыл бұрын
Winch has synthetic rope no cables.
@garypic4083
Жыл бұрын
LOL you said Ford Maverick, but I love that old Ford Fairlane in garage
@JunkNGrind
Жыл бұрын
Genius Set Up Sir. I have a Junk Removal company and I Scrap Metal on my Channel. I have a LiftGate and I’m Thinking of Adding a Winch. 👍🏼🙏🏼💪🏼. Great Video
@cs92lx
Жыл бұрын
Thanks for your reply 👍🏼 🙂
@Ron9257
Жыл бұрын
Good job🎉
@cs92lx
Жыл бұрын
Thanks 😁
@bruceshearer1719
Жыл бұрын
Thank you ,Sir.
@cs92lx
Жыл бұрын
You are most welcome
@bigretardhalo
Жыл бұрын
Neat idea, does the winch pull too many amps to run off the bed power? If not it would there be enough line to hook it across the back and then run it through a pulley on the front so you could run it off the truck 12 volt plugs right by the tailgate when in use? Cool idea for putting the boat in and it works well.
@cs92lx
Жыл бұрын
That pulls too many amps I tried plugging up a house fan and it wouldn't turn it.
@joetrombatore5704
Жыл бұрын
Kool👏👏👏
@tomwrona1973
Жыл бұрын
Use 3/4 in Ply on the second board!
@hollymyers8402
Жыл бұрын
Hey brother...thanks for posting. I am gonna try this with my F150 to help load my bass raider. I'm in Stafford...let's connect on the water.
@cs92lx
Жыл бұрын
Sounds like a plan
@ericsheckler6614
Жыл бұрын
Trying to build a winch set up to put my bass raider into my tundra also…
@hawaiibikekahuna8204
5 ай бұрын
seems like a lot of work for a light boat that coule be lifted to the gate and slid in? But it gave me the idea to mount a winch in my van to tug my motorcycle in.
@cs92lx
5 ай бұрын
When fully loaded at the lake batteries, motors,etc it was not light over 300lbs at the end of a day of fishing wasn't fun without the winch
@hawaiibikekahuna8204
5 ай бұрын
That is a formidable load there.@@cs92lx
@jcminingstore-histruthedmi9092
15 күн бұрын
Nice!
@cs92lx
Күн бұрын
Thanks!
@sfzx54
3 ай бұрын
curious how long your radio remote control worked before it quit? I had the same idea set up for loading motorcycles. The .damn thing worked first time and quit never got it to work again. the winch is great the remote control is a piece of ****! Hah I wrote this before I listened to the whole video.The cabled remote is fine.
@cs92lx
3 ай бұрын
I don't use mine that often. But the last time I checked it was still working
@deonmcdaniel7123
Жыл бұрын
What is the red pulley / boat support ? Did you build that or make it ? Thanks
@cs92lx
Жыл бұрын
I think you're talking about the boondox T bone. They are great for supporting kayaks and such. Since I have a trailer now I no longer need mine. Let me know if you would like to get it. I would let it go for a really good deal.
@nick9812PH
Ай бұрын
how heavy is the boat?
@cs92lx
29 күн бұрын
Fully loaded around 325lbs
@austinhernandez2716
Жыл бұрын
What would you need a winch for, barely anything could fit into that tiny bed
@cs92lx
Жыл бұрын
2 things are apparent you obviously did not watch the video.. And 2 you've never actually seen a Maverick. I would say hauling a 10' boat back there doesn't qualify as tiny.😉
@austinhernandez2716
Жыл бұрын
@@cs92lx I see Mavericks everywhere. I have a long bed, I can't imagine how it is having to keep the tailgate down for every little thing really. I don't understand why trucks like that are even made. Definitely not a work truck.
@cs92lx
Жыл бұрын
@@austinhernandez2716 That's why the Ford Maverick is selling like hot cakes because nobody wants a long bed truck. Very few people even need a bed that long. The Maverick bed is only a foot shorter than a F150 crew cab pickup. Seeing a Maverick and driving and owning a Maverick are 2 different things. I've had every size pick up known to man so I am speaking from what I know not what I think.
@Chubbydippin
Жыл бұрын
Wish I could hear you better. It might just be my old ears. Not sure though.
@cherenalee4957
Жыл бұрын
He has said in a previous video that he speaks in a low volume due to his neighbors.
@cs92lx
Жыл бұрын
Sorry we had volume issues during this video we are correcting those.
Пікірлер: 46