Excellent video... answered all my questions! VERY GOOD JOB, Thank you very much!
@Leiter85
2 жыл бұрын
Thanks for sharing! I’m about to purchase a base ABS.
@charlievandevord6613
4 ай бұрын
just purchase a 2023 base model. great info to know in the future. Thanks
@rickquist3992
Ай бұрын
Many Thanks!
@raymondreid3958
9 ай бұрын
Thank you, that's what I have been searching for!
@markrusk2870
2 жыл бұрын
No fuse required…..all you need is a relay
@SHOVELCARD
Жыл бұрын
this was such a great video, I'm saving it for when I do get a KLR
@robbiesmith8515
4 ай бұрын
Thanks for sharing, very helpful!
@jushirocepeda3031
8 ай бұрын
Excelente muchas gracias por compartir ! Saludos desde Mexico
@craiglabue
Жыл бұрын
Excellent again! Very well covered!
@brianmoto427
11 ай бұрын
Very helpful video, thanks for sharing Tim!
@DS_motos
Жыл бұрын
Great video, very usefull. Greatting from Argentina
@adriancruz3360
2 жыл бұрын
I appreciate you for this useful video. Regards from Costa Rica
@davestephens1993
2 жыл бұрын
Thank you sir for the effort and education.
@alanreilly9056
Жыл бұрын
Thank you Sir, that was very helpful
@Scupper7
Ай бұрын
After you add the relay are those auxiliary light spots running power all the time or do you need to purchase a switch to turn them on or off??
@mattsudman847
Жыл бұрын
Super helpful! Thank you
@larrylund1138
2 жыл бұрын
Wow! That's cool stuff Timothy. Here on the Central Coast Ca we still have good riding weather so I'm not tinkering I'm riding so I appreciate you checking that all out and teaching us all.
@danreich4320
10 ай бұрын
Great info. Thanks.
@holisticaustralia
Жыл бұрын
Awesome, thankyou very much!
@gilcomnz
2 жыл бұрын
Hi mate. Thanks for the video but you didn't really point out the connections very well. Cheers
@micah6872
Жыл бұрын
Hey Tim Thanks for sharing your knowledge. Is that the stock OEM USB port on the left side and if so where do you plug the connector in? Thanks in advance.
@danreich4320
9 ай бұрын
I could not tell either.
@andrewperron5503
2 жыл бұрын
Very helpful, TY
@bigdave6194
Жыл бұрын
Great video. My base has the fuse in the fuse panel. Quick question. When aux lights are plugged into that connector...do they come on when you switch to high beams or do they come on using a switch you put in the spot above the 12v socket space? Thanks
@anthonya8412
2 жыл бұрын
Good information thx
@cryagen2105
2 ай бұрын
There's another white capped power lead in the "bucket" beside the heated grips connector you pointed out. Is that another open ignition powered port?
@2talltimadventures
2 ай бұрын
@@cryagen2105 my apologies it's been while since I made this video. But if I recall there were wires coming out of the other side of that connection. Might not look that way in the video but I believe it did.
@billbonu1639
Жыл бұрын
I think the new klr looks awesome stripped down.Im thinking about taking everything I don't absolutely have to have off and see how it performs with all the extra weight removed, fairing and all.as far as the bike not having enough battery,stator etc to power accessories, I wonder if you can add a capacitor to store juice like we used to do with our sound systems back in the day when the amps pulled more power than the battery and alternator could make we would put a capacitor.just thought to have enough power to run a bunch of extra stuff.
@crispinleslie
Жыл бұрын
Thats awesome information, thanks Tim. I have the base model with ABS and I'm adding auxiliary lights- I guess I just ground them to the frame somewhere ?
@2talltimadventures
Жыл бұрын
The Acessory power leads are two wires. One a power and the other a ground.
@MrGrant440
2 жыл бұрын
You are correct. That wire is there. I have the basic model.. I just had to add the relay and they was able to install the 12v plug and usb, i also didn’t add a fuse. And everything seems to be working properly. You going to hook up your hand warmers to that factory. Or are you going to just go to the battery.
@2talltimadventures
2 жыл бұрын
yes I did, just posted a new video showing this
@jackmarks2176
2 ай бұрын
Base model has fuse in it already, or mine did anyway, 2024 S model.
@tysonsmith4699
Жыл бұрын
thank you so much for this been wondering if the base comes with these options just need to get the relays because abs sounds fucking annoying offroad thank you!!!!
@abeiam1357
6 ай бұрын
Hey Tim I have a traveler model as well. Could I connect the tusk heated grips to that OEM connector plug that’s under the gas tank or the one next to it? Thanks in advance for the reply
@2talltimadventures
6 ай бұрын
Yes that's where I connected mine. Just have to cut and make your own terminals since the factory one is specific.
@abeiam1357
6 ай бұрын
@@2talltimadventures ok thanks
@jimransavage2196
11 ай бұрын
Thank you for video!!! I have a gps that I had hardwired to battery on my old KLR. Zumo 396. I want to hardwire it again on my 2023 klr. Can I just attach the two wires to the accessory port after relay install? Running that wire back to battery seems stupid. I still want to do the power port install for usb charging but I want my gps hard wired. 2023 base model
@darrenhitz
Жыл бұрын
I am a rookie. How do I marry that AUX white connector to my AUX lights. just bullet connectors?
@2talltimadventures
Жыл бұрын
Yes that's what I did. Bullet connectors and heat shrink.
@kevincosby1632
Жыл бұрын
I bought a 23 S model and all it needed was the relay to power everything up, fuse was already there.
@2talltimadventures
Жыл бұрын
Very nice. Hope my information helped you out.
@levimaryott
2 жыл бұрын
I have a base model. Just needed the relay
@Garland77
2 жыл бұрын
Do you have any idea what that connector is under the seat just a bit forward of the fuse boxes? There is a white tag very near it.
@2talltimadventures
2 жыл бұрын
I believe that is a rectifier plug, if i'm not mistaken there should be AC voltage on one side and DC voltage on the other. That allows the bike to run on stator even when the battery dosnt have power. I could be mistaken on the purpose but pretty sure they are rectifiers. I would leave them alone.
@micah6872
Жыл бұрын
Hey Tim just subscribed. Wondering if you have a video on how to remove the headlight assembly? Thanks in advance and ride safe.
@2talltimadventures
Жыл бұрын
No I do not. Its not terriblely hard just takes time and patience. Once the bike is stripped of the windshield and nose fairing it's just a few bolts. I no longer have my bike or I would do a video for you. Sorry I couldnt be of more help.
@Perkypartyparrot
Жыл бұрын
Hello, do you know what connector I need to attach auxillary lights to the factory leads?
@2talltimadventures
Жыл бұрын
No I do not. It just cut it off and put in basic bullet connectors
@psychedelicrelic6410
22 күн бұрын
Am I the only one who noticed the word 'accessory' on the fuse box cover is misspelled?😆
@user-gz5ln3tf5t
Жыл бұрын
To What power source did you connect the gps.
@2talltimadventures
Жыл бұрын
Tapped into the bullet connectors behind the dash that the OEM USB and power ports are also tapped into.
@adventurebikesaustralia7627
Жыл бұрын
Hi Tim, I’m adding a twin USB port on the right, and a 12v socket on the left, to my ‘23 base model by here in Australia. I have hooked up my twin USB port on the right side to the green terminals and it works fine, but can’t work out where to connect the 12v terminal on the left. I couldn’t make out where the connection is on the right. Are you able to give some hints? Cheers!
@2talltimadventures
Жыл бұрын
I believe they both use the same power feed/ wire. Mine has the OEM ports on it and they are both connected to the same one just behind the speedo cluster. I tapped into it for my GPS also.
@adventurebikesaustralia7627
Жыл бұрын
@@2talltimadventures Are you referring to the green connectors?
@2talltimadventures
Жыл бұрын
@@adventurebikesaustralia7627 yes the wires with the green covers on the connectors. All my front accessories are tapped into those.
@adventurebikesaustralia7627
Жыл бұрын
@@2talltimadventures So should I splice the left and right ports (1 x USB and 1 x 12v) together and then one connection from there into the green?
@2talltimadventures
Жыл бұрын
@@adventurebikesaustralia7627 I think that's how mine is from the factory. So yeah thay should be fine. Not much draw on those types of things.
@Andy-bd2xe
Жыл бұрын
How do you connect to the white fog light accessory plug near the relay? What type of connector is it?
@2talltimadventures
Жыл бұрын
I'm unsure what it is. I cut it off and used my own bullet connectors.
@Andy-bd2xe
Жыл бұрын
@@2talltimadventures okay thanks!
@ronaldprince435
2 жыл бұрын
So add that relay then add your lights and switch inline with lights?
@2talltimadventures
2 жыл бұрын
Yes, the relay plugs into the factory wire harness and that will power the accesory leads. Then yes put a switch between the leads and the lights
@MrGrant440
2 жыл бұрын
I have also heard the 2022 model has more power for running all of that stuff!
@2talltimadventures
2 жыл бұрын
yes it now has 26amps of charging power vs 17amps on the previous models.
@terrymiller5246
2 жыл бұрын
@@2talltimadventures Tim, where did you get the 26Amps from? The manual states 80watts max for aux connectors, which is only around 6.6Amps. page 82 in the manual states that drawing more then the max of 80watts from Aux could cause the battery to drain.
@2talltimadventures
2 жыл бұрын
@@terrymiller5246 26 amps is the output power of the charging system
@terrymiller5246
2 жыл бұрын
@@2talltimadventures thx for the quick reply. I can't find any place that states the charging system is 26Amps.
@2talltimadventures
2 жыл бұрын
@@terrymiller5246 here is a article thays says it. ultimatemotorcycling.com/2021/01/26/2022-kawasaki-klr650-first-look-14-fast-facts/amp/
@gagehamilton2497
Жыл бұрын
play at 2.0 speed, your welcome
@mr00ks
Жыл бұрын
ok your saying all the klr 650 2022 Or all the KLR 650?
Пікірлер: 76