For my 2022 Allez Sprint, I am also running a 130mm -12 S-Works stem...and of course with a 3D printed headset cap. This completely transforms the cockpit area. Shame Specialized didn't offer this as standard, but hey it's not my problem anymore 🤣
@roadcc
Жыл бұрын
Enjoy!
@alfredrobijn131
Жыл бұрын
where do i get the 3D printed headset cap?
@PatrickLino
Жыл бұрын
@@alfredrobijn131 He literally tells you in the video, and there is a link in the description.
@francoisstephen197
Жыл бұрын
0p
@cadaver1ne635
Жыл бұрын
Or you can take deda superbox stem looks beter
@kadesters469
Жыл бұрын
Ive got literally the same brake setup on my single speed gravel bike, Ultegra di2 shifters with Magura calipers, and I've set them up the same way you did. Magura brake lines with Shimano barb and olive. Got a couple hundred miles on the setup and zero problems, amazing braking performance.
@ricardorusso1462
Жыл бұрын
This is such a nice build! Love the cable headset hack, I’m looking into doing one on my BMC SLR as well. 53-36 is THE superior gear ratio for cranksets hands down
@TeoSluga
Жыл бұрын
Nice bike. Glad to see someone is still using alloy frame👍
@alexkerslake4613
Жыл бұрын
I hope they re-release these frames. Gorgeous bike - top job
@SPLSE
Жыл бұрын
Nice to see a mix of different parts. Love the 💿 brakes.
@glennicol1361
Жыл бұрын
Really like this series!
@roadcc
Жыл бұрын
We'd better buy some more bikes!
@runnerdan785
Жыл бұрын
Can’t believe you run such a long stem? May try that myself. Keep up the great video, Jamie Williams is so funny! Thanks Road CC
@robhaddock2034
Жыл бұрын
Love this build, nice bit character to it. 100% keep the Dura Ace rings on though, colours work great with the Quark cranks and just generally look incredible.
@roadcc
Жыл бұрын
Noted!
@byrdmandan
9 ай бұрын
I bought a 2022 Allez Sprint Comp off the shelf. My "customization" was adding pedals and bottle cages. More than happy and rarely get dropped. Want more speed? Then do leg work 😁.
@GCPerformance18
Жыл бұрын
Dammm I might have to steal that magura brake setup 😅
@CatManDoSocial
Жыл бұрын
Oh my gosh, this was awesome. Jamie is hilarious. I appreciate you leaving in all the flubs. Cool bike too.
@StachePower
Жыл бұрын
dang this looks so good
@rayF4rio
Жыл бұрын
Nice bike. I believe that cable routing (under the stem thru the headset) is the most optimal set up for both aero and ability to mod the stem/spacers.
@yonglingng5640
Жыл бұрын
Finally somebody else who thinks this is a good idea! The objective is to hide them from the wind, not the mechanic! Because of this, I was able to swap my customer's third-generation Venge's stem in minutes instead of hours, unlike a sixth-generation Madone SLR.
@Kanonka28
Жыл бұрын
Dream welding is awesome ! Marketing boosts everything !
@Jacob99174
Жыл бұрын
Very crisp bike, Jamie. Nice
@massimoserafini8115
Жыл бұрын
My back hurts looking at that saddle to stem drop
@RobertRobert-uc7fi
Жыл бұрын
KING-WELDING Power booster system.
@thedronescene7474
Жыл бұрын
Silca is the best wax! I hot wax mine and then just maintain with their liquid wax. I do that for 1K miles and then clean chain again, hot wax and repeat. :)
@apv1
Жыл бұрын
Awesome series and bike
@mrichards55
Жыл бұрын
I have this frameset in the silver-blue fade. Going to build up with Ultegra disc Di2, carbon bars and Rovale Rapid CLX wheels.
@roadcc
Жыл бұрын
Nice! Sounds like a proper nice build! We're big fans of the Rapide CLX wheels, they're a very similar rim shape to these Hunt's
@StephanBechert
Жыл бұрын
Shigura YESS!
@glennoc8585
Жыл бұрын
You could get that weight down with lower profile wheelset like 40mm. Once you're up over 20kmh the weight is hardly noticeable from 7 to 8kgs.
@jeron1847
Жыл бұрын
Beautiful bike Jamie! But I still find it kind of sad to see that one of my alu bikes (Caad3 Saeco) has cleaner welds than this.. Not really an improvement over 20 years ago.
@DennisVeilleux-ll8im
Жыл бұрын
Quiet you can whisper and the noise level will not interfered in you sleeping or conversation.
@marcgtsr
Жыл бұрын
Nice!
@Kanonka28
Жыл бұрын
This is Merida boys !
@luisaguirre9959
Жыл бұрын
Nice bike ! .... What is the saddle height?
@cosinus_square
Жыл бұрын
Very nice build. On a different note, I'm sure Specialized made improvements to this frame over the outgoing model, but the rim brake frame looks better, including the welds, aero seatpost and seat tube, stiff as heck.
@JorgeGarcia-cl7of
Жыл бұрын
Carbon is STIFFER than aluminum but not STRONGER
@falkbenz5395
Жыл бұрын
Amazing Build mate! Could you possibly link the Little Company for the Headset cap? Could not find it .. Thanks and Good Ride !
@roadcc
Жыл бұрын
No problem: www.racewaredirect.co/shop/specialized-sl7-tarmac-stem-to-allez-sprint-spacer/
@Chimy1423
Жыл бұрын
😫😖Horrible welds? Please, I don't give a F*...I love it. Makes me remember that I'm riding a super aluminum race bike. 54cm frame, how tall are you?
@derdas44
Жыл бұрын
Nice bike build! Are these Magura calipers technical the same Rotor used to have on their Rotor UNO hydraulic group set?
@roadcc
Жыл бұрын
They are indeed, only difference is the colour of Iris
@sachavanderwoude2501
Жыл бұрын
😍😍
@rlmurillo
Жыл бұрын
I am interested in those Magura brake calipers, i had so much trouble with the stock Ultegra on my bike.
@roadcc
Жыл бұрын
Would definitely recommend - they’re the mt8sl FM callipers, pretty sure magura have recently released a cheaper mt4fm caliper as well or you could check out the hope rx4’s as another aftermarket option
@rlmurillo
Жыл бұрын
@@roadcc Thank you! i will check it out. On this set up only the calipers are magura? everything else included hoses are shimano even the mineral oil?
@housepfhoopz
Жыл бұрын
dont get hope rx4 its even tighter than ultegra/shimano pad clearance
@nationsnumber1chump
8 ай бұрын
question: what tubes would you use with 30mm tires? 28c would stretch thin wouldn't it? Is that why you went tubeless?
@nationsnumber1chump
8 ай бұрын
8kg is hard to do for under $5700 USD. I'm specking out a 56cm. how tall are you?
@stevek8829
Жыл бұрын
Thanks for the tubeless anecdote. That gives me strength to last another day in clincher bliss. If I do go tubeless on something, I'll be sure to get Chris King valves. I can probably afford those! Wait, yours did fail.
@roadcc
Жыл бұрын
I think I’m blaming the pump for that one!
@IngKapo
11 ай бұрын
what degree is your SL 7 stem, 6 or 12? Beautiful build!!
@roadcc
11 ай бұрын
Cheers 😊 it’s a -12
@andarenbici
Жыл бұрын
Do you always ride with so much seat to handlebar drop? What is it like in the drops?
@petergreenacre2620
Жыл бұрын
Do you have the link for Racewear for the integrated headset?
Did specialized send you a defective frame? Those welds look weird. Are they going to send you a frame with better welds? Looking forward to that build
@roadcc
Жыл бұрын
We'll get straight on to them! Certainly not the prettiest things are they...
@backuptimmy4124
7 ай бұрын
Wondering if it’s possible to use the 3D printed headset cap to hide all the cables on a 2019 Allez Sprint frameset😆
@yonglingng5640
5 ай бұрын
No, it's impossible, don't even think about it.
@backuptimmy4124
4 ай бұрын
@@yonglingng5640 build one up with 105 di2 just two external cables im ok with that
@cornelhughes6763
Жыл бұрын
Looks really good. what's Jamies Height?
@xmarcika
Жыл бұрын
Guys, you have always really good content but I'm always a bit nervous when I see in the majority of your videos your faces out of focus😀 No Face detection in the camera?
@lemonshire1
Жыл бұрын
clearly thought went into this, but i'm not such a fan of the massive mix match of parts to be honest
@glennoc8585
Жыл бұрын
Maguras blue fluid has the worst performance of the mineral oils. The boiling point is significantly lower than Shimano's own oil. I use hope 4 piston calipers and they are imo a better product than the Shimano.
@blinzi69
9 ай бұрын
Is the 2023 Allez different to the 2022 model ?
@yonglingng5640
8 ай бұрын
Ever since the Allez Sprint has gone into its second-generation in the 2022 model year, there shouldn't be any changes.
@qigong100
Жыл бұрын
Nice build, but that extreme position must be half the reason you crash all the time
@a1white
Жыл бұрын
Not riding it Jamie?! 😅
@freebird61885
Жыл бұрын
7.98kg with pedals or without?
@roadcc
Жыл бұрын
With pedals - and both bottle cages (and hair band) in fact exactly as seen
@Ghostina1
Жыл бұрын
no sworks?
@yonglingng5640
Жыл бұрын
The Allez Sprint (first and second-generation) never had an S-Works counterpart.
@janeblogs324
Жыл бұрын
54 what? Seattube? Top tube?
@roadcc
Жыл бұрын
54cm frame size...541mm effective top tube, 510mm seat tube
@mikeway1851
Жыл бұрын
Height ?
@roadcc
Жыл бұрын
183cm :)
@savagepro9060
Жыл бұрын
Bike = NOICE, just get a rim brake version!
@dainiusvysniauskas2049
Жыл бұрын
The frame is great, but those welds look just so damn bad... I've seen better welds from budget Chinese alloy frames.
@hide8165
Жыл бұрын
beautiful! sell me your bike :)
@roadcc
Жыл бұрын
Maybe one day!
@DennisVeilleux-ll8im
Жыл бұрын
Didn't come with correct installation guide
@Sarncho
Жыл бұрын
I've done a similar Allez build, I have no idea why...same as this but SRAM force x1 AXS. Biggest waste of money in my life 🤣🤣
@s.h481
Жыл бұрын
HENTAI(変態)
@rizwana.5420
Жыл бұрын
If it werent for those ugly welds..I would buy one....
@ronbell7920
21 күн бұрын
20% chance of taking a tumble on newbie crit racing. Save your money when you start !
@savagepro9060
Жыл бұрын
Jamie's bike is too small, his jacket is too small, his pants are too small . . . Jamie, everything you have is shrinking?
@roadcc
Жыл бұрын
Haha, I must remember to put the wash on cooler!
@bigasdickas
Жыл бұрын
Rumour has it you have something else that is small.....😉
@alexSigns
Жыл бұрын
XTR lightweight and brake better
@volition5559
Жыл бұрын
what horrible welds
@aucklandtoday9847
Жыл бұрын
Nothing about an Allez Sprint at all
@roadcc
Жыл бұрын
You can find our full review of the Allez sprint if that’s what you’re after over on the road.cc website
Пікірлер: 97