...a friend says this is probably one of the best kits ever. Hats off to you Gary, your productivity puts most of us to shame
@alantoon5708
11 ай бұрын
That Hurricane is one of the very best model kits I have seen, and I have seen a LOT of them. And to read that Arma Hobby started in someone's living room 10 years ago. They are the peer of the best now.
@dannyhill5437
Жыл бұрын
Reminds me very much of Eduard kits, lots of fiddly tiny pieces yearning for the carpet monster
@gordonlangdon780
Жыл бұрын
Really enjoyable and informative build and an excellent finished project. I recently completed Arma Hobby’s 1/72 scale Mustang and tbh, it was ridiculously overly complex. Some of the decals could not be seen without a fairly strong magnifying glass - pointless. So after leaving a fair few out it built up into a lovely 1/72 representation. But I promised to stick to their 1/48 kits going forward!! Keep up the great work Gary! Really loving your show.
@andrewleitch5574
Жыл бұрын
Great Build as always Gary, 1 problem I wish i didn't have to point out and which I also did. When you placed the fuselage on the wing you let the rear armour plate go to far back, the plate should be in front of the fuselage halves behind the seat. I hope the others building this kit will watch for that. Best regards keep up the good work. Andy
@garys_stuff
Жыл бұрын
Thanks for the info!
@garyhunt4032
Жыл бұрын
Brilliant job mate ,I've got couple of the 1.72 Mustangs to do from arma hobby
@geordie_mech
Жыл бұрын
Gary, youll find when you dry fit that parts 57/58 landing lights need to be swapped around as theyre mis numbered. Thats why your wing doesnt fit properly.
@garys_stuff
Жыл бұрын
Yes, they suggest shaving down part of the structure too. It's on the errata sheet that I pointed out then entirely forgot.
@allanrichards3752
Жыл бұрын
It does build into a stunning model and is well engineered. The only thing is the sprue gates going into fine edges on some parts like the wings. I would recommend a razor saw to cut as closely to the edge of the part as possible then filing off the remainder of the gate. If you use a knife guarantied you will cut into the part at some time.
@barrywalker8790
Жыл бұрын
Wow that looks great mate so much so that l forgot it was a 1/48 l thought l was watching a 1/32 the level of detail this will be my next purchase l just knew this was going to be good 👍
@garys_stuff
Жыл бұрын
Thing is Barry, you look at the top surface of the wing and all the detail there, but then remember I didn't do any panel washing. Just black primer, bit of highlighting then the top colour and all that detail still shows through.
@ianpaviour7252
Жыл бұрын
Well done Gary another excellent job now I can’t make my mind up this or the sea king can’t afford both at moment
@ljscalemodels526
Жыл бұрын
Hey Gary - great build, I’ve finished Airfix 1/72, another lovely kit and fantastic fun to build, regards Liam
@ryanparkin6156
Жыл бұрын
One of my favourites that one Gary it looks lovely
@marksinthehouse1968
Жыл бұрын
Your hawker is a corker mate ,superb Gary 👍🏻😊
@NickGeorge-l9b
Жыл бұрын
Handsome model, very well put together Gary.
@alanrogers8535
Жыл бұрын
Looks great.
@ronaldbyrne3320
Жыл бұрын
You were right, Arma will sell loads of this one. I’m working my way to getting one. All the good stuff seems to show up at the same time.
@anfieldroadlayoutintheloft5204
Жыл бұрын
good vid nice build thanks lee
@ThePhosphater
Жыл бұрын
What a great model, well done Gary.
@lesthiele4921
Жыл бұрын
Hi Gary, that was a truly excellent build, the kit itself appeared to be a great kit, your painting was done to perfection,, congratulations on a job well done, best regards from a Kiwi living in Australia 👍👍👍👍👍
@garys_stuff
Жыл бұрын
Cheers Les! It is a great kit - Arma Hobby has played a blinder here...
@jameshall6147
Жыл бұрын
That is a superb build Gary.
@hueyJoe135
Жыл бұрын
What an excellent build son 👍 I love it just fell together. I've got the Sea Hurricane in 1/72
@garys_stuff
Жыл бұрын
It's a properly good kit, this one. If they do a real Sea Hurricane in 1/48 I may have to get that one too!
@jimbraiden2094
Жыл бұрын
An outstanding kit, an outstanding build, looks a treat.
@garys_stuff
Жыл бұрын
It's little beauty Jim, really enjoyed it. Even the fiddly bits in the cockpit!
@jimbraiden2094
Жыл бұрын
@@garys_stuff needed lot of PE!!
@cosmarendy8417
Жыл бұрын
Thanks for sharing 😊
@Slycockney
Жыл бұрын
Brilliant Gary, thank you. I have one on the way to do Stanford Tuck. I'm sure I will be referring to your build video many times.
@paulcorrigan649
Жыл бұрын
Fantastic Gary. Really well done.
@Lazarbom52
Жыл бұрын
Amazing job, looks really good 👍🏻
@steb4205
Жыл бұрын
Nice looking kit and a nice looking build. Well done!
@mikewoodman7700
5 ай бұрын
Glad I found this video - I've the same kit & the Sea Hurricane version to build, I've noticed you did a lot of gluing with painted parts rather then the bare plastic was this an issue? Thanks for pointing out the pitfalls. Looks a great kit to build.
@gavinbooth
Жыл бұрын
Top work Gary shes a beauty my old marra . Regards Gav.
@garys_stuff
Жыл бұрын
Cheers marra!
@NickAndrewsFaulkner
Жыл бұрын
Good result! Sadly the two 1/48 Hurricanes in the stash (Airfix & Hobby2000), mean this one won't be joining them, however, if/when the Sea Hurricane edition appears...
@neilgodden8190
Жыл бұрын
the decal fits fine on the instrument panel btw
@garys_stuff
Жыл бұрын
Even with all the relief? That's very interesting, because there must be either some stretch in the decal or they designed it knowing it would have to conform to the surface. Might see if I can ask them about that!
@alexstokoe2542
Жыл бұрын
Looks lovely. Hoping and praying they do a 1:48 of their delightful Yak-1b that I did a decent job of in 1:72.
@NazidKimmie
Жыл бұрын
Arma recommend shaving or removing some of the rear shelf for the landing light inserts - they are not quite right and will give fit issues for the wings. Well done and thanks for the video - this looks a cracking kit indeed!
@garys_stuff
Жыл бұрын
Yes, it was on the errata sheet I told everyone to paste into their instructions then forget myself... It is an amazing kit - can't wait to see what they do next in 1/48 (maybe a P-51, maybe a P-39?)
@MHMajid-yi8iu
Жыл бұрын
👍
@paularmstrong-hv1tc
Жыл бұрын
Have just finished the Airfix version, wish I’d bought this kit instead. Had no end of trouble with warped and twisted parts, trying to get them to fit was a pain .Got there in the end and not a bad looking effort, just annoying and fiddly.Your kit looks far superior and better designed.
@iannicholls7476
Жыл бұрын
Great build Gary. I’ve just received mine so watching your experience and tips has been very timely. One thing puzzles me though. If I have read the instructions correctly it tells us, it step 33, to fit the flame shields to option 2 only. Surely they would be fitted to the night fighter (option 1) rather than the day fighter? Well, when I do my JX-E it’s having flame shields whatevers!
@garys_stuff
Жыл бұрын
It did puzzle me mate. I can see that for dawn patrols and whatever flame guards are good, but I think option 1 was more a night intruder than fighter - but then you've got to find the target at low level in pitch black so a flaming Merlin in your line of sight can't help in the avoidance of power cables and the like!
@iannicholls7476
Жыл бұрын
Odd isn’t it? I suppose the answer could be more prosaic. Given that, essentially, there was no difference between the “day” and “night versions” maybe Tuck’s squadron just happened to get one delivered that had flame shields. After all, there was a war on!
@Mullet94
Жыл бұрын
With the Mig Ammo One Shot primers how are you spraying them? I have so many clogging issues with them even following Mig's instructions. Do you thin them or have some magical needles size that doesn't clog? 😂
@garys_stuff
Жыл бұрын
I thin them about 80/20 primer to thinner.
@timwingham8952
Жыл бұрын
That fuselage/wing fit is excellent. The Hasegawa 1/48 offering always gave me trouble there. I still think of that Hasegawa kit as "new". It's not. I'm just getting old....
@BobMuir100
Жыл бұрын
Gary ol’boy what is “duraaluminin” and why do we need it? Bob England
@garys_stuff
Жыл бұрын
Duraluminium (trade name Duralumin, often just called dural) is an alloy of aluminium and 3-5% copper, with traces of other elements such as magnesium and manganese. It's an age-hardening alloy, so after forging the piece is very slowly cooled to allow a process called precipitation hardening to take place within the metal structure. Dural has the lightness of aluminium but much better torsional stiffness and tensile strength, so works very well as a structural material for aircraft. Adding copper does make the surface more susceptible to corrosion, so an outer layer of high-purity aluminium is often applied to components. This aluminium cladding is known as alclad - probably why the paint was called that!
@BobMuir100
Жыл бұрын
@@garys_stuff Gosh that is very complete! Thanks Gary
@garys_stuff
Жыл бұрын
@@BobMuir100 my pleasure!
@NazidKimmie
Жыл бұрын
That cockpit frame assembly is light years away from the Fly models 1/32 Hurricane! Which has basically '0' engineering involved.. you kinda have to guess where things go! Hopefully one day someone will doe a decent 1/32 Hurricane with this level of engineering and detail.
@starlite.captures3338
Жыл бұрын
Hi Gary did you varnish the kit before the decals went on as it looks very Matt on screen. Reason I ask is because I'm doing the beaver first in the group build and I've been having problems with the varnish peeling off when I use the the decal set even though the varnish and decal solutions are both ammo mig..??
@garys_stuff
Жыл бұрын
Yes I did, I put on some Army Painter gloss but it dried more satin!
@BHARGAV_GAJJAR
Жыл бұрын
Is hurricane mk2 ?
@garys_stuff
Жыл бұрын
Yes it's a Mk.IIc
@martinB68
Жыл бұрын
Nice build Gary,looks the job.But not for me as i need one and not loads of the same thing.
@crazylocha2515
Жыл бұрын
Now you see my dilemma. I prefer 48th or 32nd, and don't need 12 of them in my stash. It already takes up a 4x8 shelving unit, plus what's out on my desk 😜. Lots of recent good to great quality hurricanes, which to choose? Has to have a Polish squadron option, aftermarket if needed. She's going to be a dirty bird in her work clothes, so detail matters. Going to be a "take my time build". Which would you choose for the one and only in the stash?
@martinB68
Жыл бұрын
@@crazylocha2515I have done a 1/48 Polish one with as much aftermarket as possible. Dirty as it Was at the Battle of Britain.But thats it for me.I have enough room but i get bored with all the Mks ect.
@BobMuir100
Жыл бұрын
Hi Gary, now I got bored, don’t know why, you were your normal entertaining self, the model is fine so why the heck did I wander off?? Any one any thoughts? Why don’t Airfix get their kits to fit as well as Arma? If they can then anyone who wants to can??!! Airfix do confuse me!!! Great looking kit, well finished and deserves the big praise!! Bob England
@steveashforth5097
14 күн бұрын
Awful video. Do you actually read & follow the instructions?
Пікірлер: 66