Rhonda and Tristan did a great job 👏 mate !!! That heel and toe was definitely making a difference !!! 😜👍🇦🇺
@TURBOTRISTO
Жыл бұрын
Thanks Richo
@mayk3lll
Жыл бұрын
Ayeeeee @5:34 is me 😂❤
@TURBOTRISTO
Жыл бұрын
Nice car what was your time
@mayk3lll
Жыл бұрын
@TURBOTRISTO thank you bro. Was in session 4 with a consistent 1.42 with 142.3 being the quickest. 2nd time at winton and 3rd time tracking for me and the car. Does have lsd and is a must like you said. Rocking the chongdata stage 2 🙂
@mayk3lll
Жыл бұрын
@@TURBOTRISTO video is up if you want to have a look. Sloppy as.. can tell I'm new
@mayk3lll
Жыл бұрын
@@TURBOTRISTO btw the other quick cl9 was the gunmetal cl9 by intima. Pb for him was a 1.41
@TURBOTRISTO
Жыл бұрын
yep thats the one he was flying also
@ZacBaldy
Жыл бұрын
RHONDA Loved it!!! So wish I could have seen her in action!🥹
@TURBOTRISTO
Жыл бұрын
you can put her to work any time mate
@victorwilks88
Жыл бұрын
Well done buddy ! Cant wait to meet Rhonda in person 😮
@TURBOTRISTO
Жыл бұрын
Can't wait!
@angry9901
Жыл бұрын
Try to have both hands on the steering wheel, only take your hand off at the point you need to change gear and then put it back onto the wheel. To limit wheelspin out of the corner either open the steering angle or use less throttle or even better, a bit of both.
@TURBOTRISTO
Жыл бұрын
Thanks for the tips
@victorwilks88
Жыл бұрын
Heal and toe sounds awesome dude
@TURBOTRISTO
Жыл бұрын
thanks man i got a lot of practice still to go
@davidzebar6876
10 ай бұрын
What suspension mods do you have on there? Doesn't seem like you're struggling with understeer. Are you running much camber? I have a 22mm rsb but still struggle with understeer
@TURBOTRISTO
10 ай бұрын
Check out the full build series, there’s heaps on the suspension
@davidzebar6876
10 ай бұрын
@@TURBOTRISTO yeah I've checked that out and looks like you've got camber arms but I didn't see how much camber you're running unless I missed it. What kind of alignment spec do you run?
@mailtsauce
Жыл бұрын
There’s a few accords that have done 1.41 at Winton without LSD gearboxes. I think you just need more seat time
@TURBOTRISTO
Жыл бұрын
100% facts
@mickosjzx
Жыл бұрын
Beautiful brake foot Rhonda
@TURBOTRISTO
Жыл бұрын
Protex worked a treat
@ryanpanditharatne1308
Жыл бұрын
Where did you get your protex cmc and csc? Part number too if possible thanks!
@TURBOTRISTO
Жыл бұрын
I get everything through my website spoolup.com.au I’ll add those parts tomorrow
@ryanpanditharatne1308
Жыл бұрын
@@TURBOTRISTOTHANKS!
@TURBOTRISTO
Жыл бұрын
All the parts are on spoolup.com.au now
@Slot1Gamer
Жыл бұрын
is installing a LSD on rhonda a big job?
@TURBOTRISTO
Жыл бұрын
Yes need to remove the gear box open it up swap out the diff and seal it all back up
@CL9k24a3
Жыл бұрын
you need 50 vtc gear for shorter runner manifolds and it must be tuned.
@TURBOTRISTO
Жыл бұрын
Yep all on the way
@CL9k24a3
Жыл бұрын
@@TURBOTRISTO you can also machine stock. Removing 1.5mm = 5 vtc so you need to remove 6mm to have 45 vtc gear if it makes sense to you paying machine shop for that.
@TURBOTRISTO
Жыл бұрын
thats a good tip man we were discussing this last week
@peter_brash
Жыл бұрын
That Civic nearly ran you off the track! What a 🤡
@TURBOTRISTO
Жыл бұрын
It was all good I’m a big boy with dirty undies
@technologicmse
Жыл бұрын
It's a racetrack and cars are out competing to set times, unfortunately that will always happen when there's cars on hot laps catching cars on warm-up laps. Best thing everyone can do is keep an eye on their mirrors and keep off the racing line
Пікірлер: 41